SolarGlow XD P513.47X USB Rechargeable Outdoor Table Solar Light Instruction Manual
- June 16, 2024
- SolarGlow
Table of Contents
SolarGlow XD P513.47X USB Rechargeable Outdoor Table Solar Light
Instruction Manual
PRODUCT ANSTRUCTION
- ON/OFF BUTTON
- TYPE-C IN / CHARGING INDICATOR
- LED LAMP
- SOLAR PANEL
- HANDLE
SPECIFICATION
Bulb : LED
Lumens : 12
Battery : 1200mAh
Cable : Type-C 5V/2A
Working time : 8 hours
Waterproof level : IPX4
Please read the following instructions carefully and follow them to ensure
that the product serves you safely and to your full satisfaction.
IMPORTANT: only use included accessories or certified and tested accessories
to charge this device. Using third party accessories can influence the item
safety.
CHARGING
Charge the lamp with the provided Type-C cable. Once the lamp is charging, the
indicator light will turn red, and will turn off once fully charged. Charging
by cable takes about 3 hours
When charging by solar energy the indicator will be green and it will turn off once fully charged. In optimal conditions it will take around 12 hours to fully charge the lamp by solar energy
OPERATION
The rechargeable solar lamp has 2 main lighting modes: cool white light & warm
white light.
Turn on the lamp with the power button. Press the power button again to switch
between 2 light modes. Press and hold the power button to adjust the
brightness.
WARNING : AVOID EYE CONTACT WITH THE LIGHT. THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
OPTIMAL SUNLIGHT CONDITIONS FOR SOLAR CHARGING
To achieve the best results when charging your lamp using the solar panel, it
is important to place the lamp in an area that receives adequate sunlight.
Here are some guidelines for optimal sunlight conditions:
- The lamp’s solar panel is designed to absorb sunlight directly. Place the lamp in an area where it can receive direct sunlight without any obstructions like buildings, trees, or other objects casting shadows.
- Ensure that the solar panel is facing upwards and is not tilted at an extreme angle. This allows it to capture sunlight most effectively.
- For maximum efficiency, orient the solar panel towards the sun. In the northern hemisphere, this typically means pointing it towards the south. In the southern hemisphere, aim it towards the north.
- Allow the lamp to be exposed to sunlight for at least 8-10 hours to achieve a full charge. Extended exposure to sunlight ensures the battery reaches its maximum capacity.
- While the solar panel can still charge the lamp on cloudy days, direct sunlight is ideal. If possible, place the lamp in an area where it will receive the most sunlight on clear days.
- Regularly clean the solar panel’s surface to remove dirt, dust, and other obstructions. A clean panel absorbs sunlight more efficiently.
- Consider adjusting the orientation of the lamp’s solar panel to account for changes in the sun’s position throughout the year. This can help optimize charging efficiency.
Remember that the effectiveness of solar charging may vary based on geographical location, time of year, and local weather conditions. It’s recommended to monitor the charging performance and adjust the positioning of the lamp as needed to ensure the best results.
WARNINGS:
- Do not attempt to disassemble or modify the lamp. Doing so may result in electric shock or fire hazard. For servicing or repairs, contact a qualified technician.
- Keep the lamp and its components out of reach of children to prevent any potential hazards. Do not allow children to play with or near the lamp.
- Do not expose the lamp to open flames or heat sources, as this may lead to a fire. Keep the lamp away from flammable materials.
- Avoid exposing the lamp to extreme temperatures (below 0°C/32°F or above 40°C/104°F) as it may damage the internal components.
- Do not submerge the lamp in water or allow moisture to enter the internal components. This may result in electrical damage or malfunction.
- Do not leave the lamp connected to a power source for extended periods after it is fully charged. Overcharging may shorten the battery lifespan.
- Only use the provided Type-C charging cable or approved accessories to charge the lamp. Using unauthorized accessories may result in damage or malfunction.
- Do not look directly into the LED light source, as it may cause discomfort or temporary vision impairment.
- Dispose of the lamp and its components in accordance with local regulations and guidelines. Do not dispose of in regular household waste.
- The lamp is not designed to be fully submerged in water. Avoid exposing it to wet or damp conditions to prevent damage.
- Do not attempt to charge the lamp using incompatible or damaged charging equipment. This may result in electrical hazards.
- Avoid contact with corrosive or harmful chemicals, as they may damage the lamp’s surface or internal component
- Handle the lamp with care to avoid dropping or subjecting it to heavy impacts, as this may cause damage.
- Keep the charging cable away from areas where it may become tangled or pose a tripping hazard.
- Disconnect the lamp from the power source when not in use to conserve energy and prevent potential hazards.
XD Connects B.V.
Lange Klieg 6-28
2288 GK Rijswijk, The Netherlands
1F, centrum, Holt Street,
Birmingham, B7 4BP, England
