Virpilo L17 Voice Recorder 64GB 4552 Hours Large Memory Voice Recorders User Manual

Virpilo L17 Voice Recorder 64GB 4552 Hours Large Memory Voice Recorders

Specifications

• Model: L17
• Languages : English, Italian, Spanish, French, German
• Last Edited: 2022.08.15

Parts and Controls

Recorder Parts

1. Indication Light
2. Headphone jack/USB port/Charging hole
3. Power Switch Previous
4. Recording File/ VolumeUp
5. Play/ Pause Button
6. Next Recording File/ VolumeDown

Note:

• Power switch: one button for recording/ saving. “ON” means power on/power display/record, and “OFF” power off/ recording save.
• Wire-controlled earphone: play/ pause/ increase or decrease volume/ previous or next recording file.

Instructions

Charging

• First, please confirm the device power switch is in the “OFF” position. Then plug the USB cable (included) into the device’s Headphone jack/USB port/Charging hole, and then connect the computer or power charger (not included) to charge.
• The recorder flashes red when charging, after fully charged, the blue light is always on. About 1.5 hours to get fully charged.
  Note: Please use the power charger with charging current≦ 1A to charge, otherwise it may damage the device or cause danger (Our product does not come with a standard power charger).

Record/Save Recording

• Start Record: Without inserting the earphone, turn the power switch to the “ ON ” position, the red indicator light is on, then flashes blue and off. Recording starts.
• Save Recording: Turn the power switch back to the “OFF” position to automatically save the recording and shut down

Note: Do not plug or unplug the headphones while the power is on

Three Methods to Playing the Recording Files

Play Files via the Headphones
Plug the headphones into the device and turn the device power switch button to the “ ON ” position to play recordings or music files. Long press the “ Play/Pause ” button to switch between recording playing or music playing

Earphone Volume Adjustment / Track Switching
When playing Recording/Music, long press the “+” or “ – ” button to increase or decrease the volume. Short press the “ + ” or “ – ” button to switch between the previous or next files.

Earphone Play/Pause
When playing Recording/Music, press the “Play/Pause” button to enter the pause mode ( the red light always on .Long press this button to switch between recording/music modes

Play Files via the Computer
Connect the device to the computer with USB cable, then open the removable disk, find and open the folder named , you will see all recording files, click the recording file you want to play, and open your computer volume.

Note:

• In the WIN system, you can use [ Windows Media Player ] to play.
• In the IOS system, you can download [ VLC Media Player ] in the app store and install it.

Use OTG Function to Connect to Phone
Turn off the recorder before connecting, and don’t disconnect the cable at will after connecting, otherwise the file may be damaged.

1. Please enable the OTG function in the system settings.

2. Use the supplied OTG adapter to connect the USB cable and device, then plug in the phone.
   Note: The OTG adapter included in the package is Type-C, which is suitable for Type-C mobile phones that support OTG function

3. When the connection information pops up on the page, click it to view all files.

4. Click the folder to play or delete the recorded files.

Voice Control Recording & TXT Document Setting

• TXT Document Settings
  Connect the device to the computer, find the”reset” file, and open it you will see the contents shown below in Image 2. You can set the Voice Control Recording Function, Bit Rate, Recording
  Volume on this TXT document.

• Turn on/off the Voice Control Recording
  Under ” power off ” status, connect to the computer, open the reset file, and write the optional number ” 0-7 ” behind ” VOR: ” to turn on the Voice Operated Recording function. The larger number is, the more sensitive is. To write “O” behind “VOR:” which means turn off the Voice Control Recording Function.

• Bit Rate Setting
  Write the optional number “1-9” behind “BIT:” to set the bit rate. “32K- 1536K”, “1” means 32k, “2” means 64k, “3” means 128k, “4” means 192k, “5” means 256k, “6” means 512k, “7” means 768k, “8” means 1024k, “9” means 1536k. 1-3 is MP3 format, 4-9 is WAV format

• Sensitivity Adjustment
  Write optional number “1-7” behind “GAIN:” to set recording sensitivity, the larger the number is, the louder the recording sound Will be.

• Recording Segment Time Setting
  Write adjustable from 10 to 240 minutes behind “PART:” to set the recording time you need. Suitable for continuous recording over a long period.

Note: These parameters can only be set on the computer, as shown in the image, the parameters are factory default settings. After setting the TXT file, you must choose to save. If you do not choose to save, the set TXT file is useless. If you need to format the device, please back this TXT file, don’t delete it.

How to set the time stamp

1. Find the“reset” text document.
2. Modify the numbers after “TIME:” one by one and save the text document （Do not change the format or the time setting will not take effect）
3. Timestamp setting successfully.
   Note: If you need to format the recorder, please back up the files you don’t want to lose first.

Manage Recording Files

First, please confirm the device power switch is on the “OFF” position, after connecting the device to your computer’s USB interface with a USB cable, you can move or copy your recording files to other places and also delete it. Just manage it like your ordinary files

Specifications

Product Parameters

• Dimensions 285710mm
• Recording Format WAV
• Play Forma t MP3/WAV
• Battery Capacity 200MAH
• Charging Time 1.5 Hour
• Battery Life Recording:30 Hours/Playing: 20 Hours
• Net Weight 45g(Specific To The Actual Product）

FQA & Warning Tip

• Q1: Suddenly Unable to Record…
  A1: Please connect the device to a computer back up the important files first, and then format the device. If still unable to record, the device may be damaged, please contact us via Amazon email or our customer service email in time. We will deal with it immediately for you.

• Q2: The Indicator Light is not Responding or Under Abnormal State that is Always Bright…
  A2: Please backup the important files first. After connecting to the computer, find the removable drive, click the right mouse button, select Format, and then select Quick Format. If still does not work, the device may be damaged, please contact us via Amazon or our customer service email in time. We will deal with it immediately for you.

• Q3: No Response after Connecting to the Computer via the USB Cable…
  A3:

  • Check whether the switch of the recorder is in the OFF state, be sure to be in the OFF state.
  • Check whether the original USB data cable is used, try to use the original USB data cable (very important)
  • Replace another computer’s USB interface, and try to connect the computer’s rear USB Interface.
  • If it has not been resolved, don’t worry, please contact our product technical support team via Amazon email.

• Q4: Can’t play recorded files when connected to a computer…
  A4 :

  • After connecting the earphones, turn on the device to check whether the recorder can play with headphones normally.
  • If the recorder can play with headphones normally, it indicates that there is a problem with the decoding of your computer player, and you need to re-install the player that supports WAV format decoding. Or you can set Windows Media Player as the default player.
  • If it can’t play with headphones, it is possible that you did not turn off the machine during the recording process, which caused the recording file to be damaged. You can connect it to the computer to delete all old recording files, re-record and repeat the above operation and check.
  • If the above steps still cannot help you, please contact us via Amazon Mail.

Warning Tip

1. Do not place this product in a heating device or in a hot environment.
2. This product uses flash memory to store data. Please backup the required data on your computer or other storage devices in time. If the product is damaged or cannot be read/ recognized, our company is not responsible for the loss of data.
3. Once the memory is full, the device cannot be turned on normally. You need to back up important recording files to the computer clean up the disk space of the device in time, and then turn on the device again. Our company is not responsible for data loss

WARRANTY

1-Year Performance & 1-Month Refund Warranty: We provide a one-year guarantee that all of our products will meet stated performance specifications under normal use and proper care.
When your voice recorder is damaged/faulty/unusable, please contact us via Amazon Email or our product after-sales service team in time. We will give you one good solution within 24 Hours.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>