rectrotec 350x Duct Tester User Guide
- June 16, 2024
- rectrotec
Table of Contents
rectrotec 350x Duct Tester
Retrotec’s Model 350x Residential Duct Tester Quick Guide
Revision Date: 2023-07-18
Specifications
| Component | Description |
|---|---|
| DM32X Gauge | Measurement instrument for the DuctTester |
| DucTester | The main testing device |
| Depressurization Adapter | Adapter used for depressurization testing |
| Grill Mask | Used to seal off vent grills |
| Reducer Set | Set of reducers for varying duct sizes |
| Carrying Case | Case for transporting the DuctTester and accessories |
| Range Plugs | Plugs included to adjust the range: 11, 29, 47, 74 |
Setup Instructions
- Unpack, connect gauge.
- Remove everything from the case.
- Power on the gauge, tap the screen & check the battery state. Charge if necessary.
- Setup wifi connection to get access to additional video assistance.
- Connect yellow, green and blue tubes to the gauge.
Note: Gauge remains connected like this for all tests.
Gauge Connection Image Description
A gauge is shown with three tubes connected to it. The top of the gauge displays a digital reading. The tubes, colored yellow, green, and blue, are plugged into corresponding colored ports on the gauge.
Contact Information
- Website: www.retrotec.com
- Support: 888-330-1345
- International: +31 (0) 522 282941
FAQ
- How do I know which range plug to use?
- Choose a range plug based on the size of the duct you’re testing. The included range plugs are numbered 11, 29, 47, and 74 to fit different duct sizes.
- What should I do if the gauge battery is low?
- Power on the gauge, tap the screen to check the battery state, and charge it if necessary before proceeding with the tests.
- How can I get additional assistance during setup?
- Setup a wifi connection on the gauge to access additional video assistance for the setup process.
- Is it necessary to disconnect the tubes after each test?
- No, the gauge remains connected with the yellow, green, and blue tubes for all tests.
Product Overview
Unpack, connect gauge
Checkboxes ( ) for each step.
- Remove everything from the case.
- Power on the gauge, tap the screen & check the battery state. Charge if necessary.
- Setup wifi connection to get access to additional video assistance.
- Connect yellow, green and blue tubes to the gauge.
- www.retrotec.com |
- Support: 888-330-1345 |
- International: +31 (0) 522 282941
Read User Manual Online (PDF format)
Loading......