TRENTO 3-Blade Smart Ceiling Fan LED Light Kit Installation Guide

TRENTO 3-Blade Smart Ceiling Fan LED Light Kit

SAFETY PRECAUTION:

IMPORTANT: PLEASE READ BEFORE INSTALLATION:

1. Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.

2. CAUTION: Read allinstructions and safety information before installing your new fan. Review accompanying assembly diagrams.

3. Make sure that all electrical connections are in accordance with National Electrical code, ANSINFPA /Uand local codes. Hire a licensed electrician you are untamiliar with instailing

4. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 2.1m (7 feet) from the floor and 18 inches from the tip of the blades to the wal

5. WARNING: TO reduce the risk ot tre, electric shock, or personal injury, mount to outiet box marked ‘ACCeptable tor Fan Support of 15.9 kg (35 lbs) or less” and use mounting screws provided with the outlet box.
   CAUTION: TO reduce the risk of injury, use only the screws provided with the outlet box in
   conjunction with the lock washers provided with the fan.

6. The outlet box and supPport structure must be securely mounted and capable ot reliably supporting a unimun 03 pounds. Use oniy d.L. sted ouiet Doxes marKed Acceptable 1or Fan upport or

7. After you install the fan, make sure that all mounting components are secured to prevent the fan from falling9

8. Do not insert anything into the fan blades while the fan is operating.

9. To change the direction ot the rotation ot the blades the tan must be in operation mode.

10. All set screws must be checked and retigntened where necessary betore installation.

11. WARNING: To reduce the risk of personal injury, do not bend the blade bracket when installing the brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating tan olades. nstallinc

12. To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan iaht ki

13. After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the ungrounded
    conduetor On tne otner siae or tne outiet boX.

14. The splices atter being made should be turned upward and pushed caretully up into the outiet

15. DOX. Conductor wiring identified as grounded is to be connected to a grounded conductor ot power supply. Conductor wiring identified as ungrounded conductor is to be connected to an ungrounded conductor. Conductor wiring identified for equipment grounding is to be connected to an equipment- grounding conductor.

16. This device complies with part 15 of the FCC Rules. Operation is subject to the following two ust any interference received, including interference that may cause undesired operation.

17. WARNING: To reduce the risk of fire or electric shock, this fan must be installed with a general Us, sOldting wall controlwswitch.

18. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

19. the important sateguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. lt must be understood that common sense, caution and care are factors which cannot be built into this product. These factors must be supplied by the person (s) installing, caring tor and operating the unit.

20. CAUTION: The linht sourra is dosinnd for the for this specific application and can overheat if serviced by untrained personnel. If any servicing is required, the product should be returned to an authorized service tacility tor examination or repair.

BEFORE YOU START

Contact a licensed electrician if you are uncomfortableperforming electrical work. A licensed electrician must installthe fan if required by local code. Do not use the fan with a dimmer switch. Turn off power at breaker

TOOLS AND MATERIAL REQUIRED

Product instruction

Installation

Disassembling the Motor Assembly:

1. Take the motor assembly out of the box, use a screwdriver to loosen and remove the canopy screws and the mounting plate. Save canopy screws for later use.
2. After taking out the light kit, remove one screw from the the centre fixing plate of the motor assembly, and loosen but DO NOT remove the other two keyhole screws,and remove the light kit pan. Save the removed pan screw for later use.

Motor Assembly Installation:
You have two options for mounting plate installation. Pick which one works best for your location.
Note: For better fan performance, make sure the mounting plate is level.
Option 1: Fasten the mounting plate with the wood setscrews (included) when securing to the wooden ceiling beam or support structure with approved electrical outlet box.
Option 2: Use machine screws (provided with outlet box) and washers when securing to existing ceiling fan-rated outlet box. If the mounting plate is installed at the outlet box, it should be installed on the outlet box with the screws that came with your outlet box itself. Pull the supply wires (the black, white and ground wires) out of the outlet box and through the hole in the mounting plate and lay them to the side.
Note: DO NOT use the plastic outlet box. Use only U.L. listed outlet boxes marked”Acceptable for Fan Support of 15.9 kg (35 Ibs)or less”.Additional washers (not included) may be needed to insert between the outlet box and mounting plate.

Installing the Light Kit Pan, Light Kit and Lampshade:

1. Push the light kit pan to the fixing plate of motor hub so that the two loosened screw headsfit into
   the keyhole slots. Feed the light wire connector plug from the fixing plate through center hole of the light kit pan.Turn the light kit pan clockwise. Install back the last pan screw.Make sure all the screws are firmly tightened.

2. Allow the light wire connector plug to come through the light kit. Install back the light kit and the light kit is magnetically attracted to the pan with the help of magnet. Insert the light wire connector plug to the light kit terminal block as shown in Fig 5.2. 

Installing the Lampshade:
Rotate the lampshade clockwise until it locks into the motor assembly tightly as shown in Fig 6.1.
After installation,the lampshade as shown in Fig 6.2.
Warning: To prevent SERIOUS INJURY or DEATH, make sure that lampshade is properly secured Allow the lampshade to cool completely before removing.

Power on
At this time, the ceiling fan has been installed. Turn on the power supply of the main switch or the room where the ceiling fan is installed. After power on, observe whether the fan light is on. 

Remote Control Operating Instructions:

Pairing the Remote Control to Your Fan within 1 min. of plugging tan to power source, press and hold button for 3 sec. to pair remote control and fan. Successtul pairing will trigger the fan lamp off.
Remote control Dutton dennitions

1. Turns the fan off.
2. SWITCHES between summer mode and winter mode.
3. Summer mode – (Counter-clockwise) A downward airflow creates a cooling effect. r airHow moves warm air away from the ceiling area and redistributes it around the living space. ature
4. Turns the fan on and decreases fan speed.
5. Turns the tan on and Increases fan speed.
6. Nature Switches the fan speed between nature mode and normal mode. Simulates a natural breeze.gentle enough not to aisturo vwhile you sleep.
7. Turns the lights on or off and RF pairing.
8. Note: PresSS/nold button Tor 3 Sec. witnin 1 min. or plugging tan to power sOurce to pai
9. remote and tan. Successful pairing will trigger the fan lamp of.
10. AP Mode on APP, follow the APP control instructions and enable fan Wi-Fi.
11. Press/Hold button to decrease the light intensity
12. Press/Hold to button to increase the light intensity.
13. Warning: Do not expose the remote control to direct contact of water.

APP Control Connection:

1. First download the free Carro Home app from the App Store or Google Play or scan the QR Code as below.
2. Note: This ceiling fan needs to use 2.4Ghz wifi to work when you connecting the device, and after connecingit can use the 5Ghz or 2.4Ghz.
3. Open the Carro Home app to create your account. The account with
4. Carro Home can be registe red through E-mail or Mobile phone.
5. Connect the device to the Carro Home app (Four ways connection):
6. Bluetooth connect (WIFT & Bluetooth on)
7.  Fress * Duton into the device ist, tnen a window wil pop up to snow you some devices can connected
8. .Click “Go to add” (if you click Do not add’ in mistake. please see “Do not add’ steps).
9. Connect to your home WIFI, then back to the app and wait for connectin9
10. “Do not add” steps:
11. Select “Electrical”‘(smart switch) or “Air Circulation’ (smart ceiling fan) on the sidebar menu
12. then select “Ceiling Fan Switch” or “Ceiling Fan'” and tap next.
13. Connect to your home wiFl and tap “Next” to wait for connecting Auto Scan (WIFI & Bluetooth on) a. Press*” button into the device list.
14. lap “Auto Scan on the top.
15. Wait for the device comes out and tap “Next,
16. Press “* button to add device.
17. nnect to your home wiFl wait tor connecung
18. WiFl connect-EZ Mode (WIFl on & Bluetooth off)
19. Press “*button to select “Electrical (smart switch) or “Air Circulation'”(smart ceiling fan) on the sidebar menu then select “Ceiling Fan Switch” or “Ceiling Fan” and tap next.
20. Connect to your home wiFl(Only tor 2.4Ghz).
21. E Mode is set as default, just tap Next button to wart tor the connection to complete
22. WIFl connect-AP Mode (WIFI on & Bluetooth off)
23. Smart ceiling fan: Press and hold the WIFI button on the remote for 5 seconds into AP Mode.
24. Smart switch: Press and hold the “OFF” button for 10 seconds till the indicator light blinking slowly to into AP Mode.
25. Press +” button to select “Electrical “(smart switch) or “Air Circulation”(smart ceiling fan) on the sidebar menu then select “Ceiling Fan Switch” or “Ceiling Fan” and tap next.

BASIC PRODUCTS PARAMETERS

Care and cleaning:

1. Check ine support connections, Drackets, and airio attachments twICe a year, Make sure they are secure. Because of the fan’s natural movement, some connections may become loose over time. t is not necessary to remove the tan trom the celing
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3.  (Optional) Apply a light coat of furniture polish to the wood blades.
4.  (OptiOnal) cover small scralches with a lignt application o shoe polish.

DO not:

1. Use water when cleaning. water could damage the motor, or the wood, or possibly cause an electrical shock.
2. Apply oil to your fan or motor. The motor has permanently lubricated sealed ball bearings.
   Note: Power off the fan before product maintenance or cleaning the fan.

FCC Statement:

NOTE:Ihis equipment has been tested and tound to comply with the limits tor a Class B digital device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmtul interference to radio communications. However, there is no guarantee that interference will not OcCur in a particular installation. if this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the tollowing measures

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radiol TV technician for help.
5. WARNING: Cnanges Or modmcations to this unit not expressiy approved Dy tne party responsIDIe for compliance could void the user’s authority to operate the equipment.

TROUBLESHOOTING

SYMPTOM|

POSSIBLE SOLUTION

---|---

Fan not spinning

|

1. Make sure ch e fan i s gett ing pow e r.

2. . C h e c k you r c ir c u i t b r e a ker or fuse panel and wall switch for functionalit·y.

3. Fan wires are connecting with the house wires correctly.

4. Remote control must be paired with the fan within 1 min ute af ter the fan g etting power.

5 If you have pai red the app but the fan still didn’ t work (lI9ht and fan both didn’ t Y/Or k) or

t:uuld11′  l µc1ir lh    a µµ lo lhtt fc.t.n ,  tr y lu rtnrnl l11 fc11i:  lo ntt>ttl   t h    cm, t;Ul Lin t :Ju w,.tr fur 10   mmul es, then turn the power  on and press the pairing  button Y  on i he  remote  for  3  seco  nds ti ll thr.fnn lnmp of f, the n r>nir th e  C .1rm hnm n .1pp n g;:ii n.

6. Us e a mu lti – me1er a nd le st the ad apter ‘N1ring  ha rnes s to see 1f the re is any electr ic al o utput.

7. All the pin wiring on the c rcuil b oarc are inserted ligh t and in the right position.

8. Remo1e need to pair with the fan first.

9. M:Jke   u, e ll u:! (an bl::.il.1 8 8pi11 fr e e l y·.

10. If you’ re usin g a w al l co ntrol. chec k the po we r to 1he b rea ker f rom your cont rol and l ry working ·your r.P.ll l ng  f An m An u All y. (Nn r m AI !\ wi t c h on ly  fn r th    fFIn ()OVIP.r nn ,’of f)

Fan light not working

|

1. M ak e s ur e LE D wires a re conn ec te d to the ci rc u i t board .

2. Make 9ure   h e 111ho le  f an is  po v.·.e r e d.

3. . R e m o t e n eetl t o p a i r w i t h t he  fa n fir s t.c o rr e c t l y a n d in the re t ent i o n s lot.

The fan is noisv and wo t>tll ing·

|

1 C h e c k I f thP.h la e scre ws MP. NOT ruhhln g agelnsr thll ro und r lAs tlr. part of thP. motor

2. Check the pin wire are NOT connec ted aga,nst lhe moving part.

3 Check the down fan cup is NOT hittin 9 the motor.

1. Confir m the ccm op y is NOT tou 4,;h i n g the ce i li n g  whilt:t l h fan is in uµe ration .

5. Chec k the down rod i3 NOT s lanted.

6. Tigh ten any loose scre ws on lhe light kit, (an blades. 1no to r coup ling, down ro d, b ra c k e t s and mounting hardware.

7. Confirm l he hanger ball is firmly seated in the mounting bracket.

8. The ceiling :ieam must meet the minimum tensile test strength of 30KG for installation.

9. Make sure thf’.! 8 i rfo l l s a n d b rac k et s a rn NOT bentor deformed.

10. Verity· the wir e connections are not rattl ing against each other.

1 t Verif y the fan blades M e not cracked If the fan blades are cracked replace tM damaged blades ‘llith anew blade set fr om the same brand as your cei ing fan lo ensure compatibility.

12. ThP. ll gh t k it Is N OT s l anti n g a n d hilt in g t h P. m otor

U n a b l e to p a ir

r e mo te a nd app

| 1 . C h e c k if the wi re s are con ne cted in the r ight pos ition or no t.

2. Chec k the batt erie s in the rem ote .

3  Dl r.n nncct thn pnwm fnr 1 O m l n11tt'”!r: rl”!r.nn nr.r.t thn row r.r and pnlr the.: m mot r. wit  h  t h t: fM l m m e d tatc l y, w it hi n 3 seconds. Also try pai r ng the App to reco nne ct.

4  Th e W iFi must be 2 4Gh z, incompat ible witn 5Ghz WiFi or combine with 5Ghz.

5 Ap p must in th e new version.

6. Connect with cor rect app  Carro Ho me”

Fan or light turning on or off by themselves|

1. Confirm the circuit breaker ts not malfunctlon,ng.

2. Verif y the wire connections are not frat ed.

3. Check the app is not set l he timeror schedule

4. Cut the fan power for 10 minutes then power on again.

5 All the pins ‘IJiri n!; on th e circuit board are inserted tight and in the right position

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>