Moose Toys 11107 v20 1L Beast Lab Unleash Your Beast Instruction Manual
- June 16, 2024
- moose toys
Table of Contents
Moose Toys 11107 v20 1L Beast Lab Unleash Your Beast
Product Information
Specifications:
- Product Name: BIO MIST & REFILL EXPERIMENT PACK
- Compatible Device: BEAST CREATOR (sold separately)
Product Usage Instructions
Refilling the Bio Mist:
- Flick the Power Mode Switch to the Power Off position and remove the Chamber from the Base.
- Unscrew the lid of the Bio Mist Refill and locate the cross-shaped hole on the Base.
- Insert the end of the Bio Mist Refill into the hole until it stops and firmly squeeze the Bio Mist Refill with a pumping action to empty the bottle.
REFILLING THE BIO MIST
- Flick Power Mode Switch to Power Off position, remove Chamber from Base.
- Unscrew lid of Bio Mist Refill and locate the cross-shaped hole on the Base.
- Place the end of the Bio Mist Refill in the hole until it stops and firmly squeeze Bio Mist Refill with a pumping action to empty the bottle.
TROUBLESHOOTING
NOTE: The Beast Creator instruction steps differ from this instruction manual. The Beast Creator is sold separately.
- To follow these Refill Pack steps, enter into Supercharged Mode, as detailed in Experiments 1 and 2.
- Make sure that the Power Mode Switch is in the up position (Creation Mode) to activate Supercharged Mode.
- To check if you are in Supercharged Mode, look at the Alarm LED; it will be glowing red.
SCAN FOR A REFILL PACK TROUBLESHOOTING VIDEO:
SCAN HERE FOR IMPORTANT SUPERVISOR INFORMATION:
Parental consent required before going online and viewing online content.
YOUR REFILL PACK
Pandemonium Blade Experiment
Experiment 1 Guide Blade Fusion Experiment
Experiment 2 Guide
- Tweezers
- PandemoniumBlade
- Bio Mist Refill
WARNING :
VEGETABLE GLYCERIN PRODUCES A “MIST” EFFECT WHEN USED WITH BEAST LAB BEAST
CREATOR (SOLD SEPARATELY), DISCONTINUE USE IF IRRITATION OCCURS. NOT INTENDED
TO BE INTENTIONALLY INHALED. USE IN WELL VENTILATED ROOM. ONLY USE APPROVED
REFILL KITS TO REPLENISH VEGETABLE GLYCERIN, USE OF ANY OTHER MATERIALS MAY
DAMAGE PRODUCT OR LEAD TO UNSAFE OPERATION.
CAUTION :
USE UNDER PARENTAL SUPERVISION. DO NOT EAT OR DRINK ANY MATERIALS IN THIS
PRODUCT. AVOID EYE CONTACT WITH ALL MATERIALS IN THIS PRODUCT. IN CASE OF
ACCIDENTAL EYE CONTACT, FLUSH EYES WITH WATER FOR 10 MINUTES. SEEK MEDICAL
ATTENTION IF IRRITATION PERSISTS.
IMPORTANT:
READ AND FOLLOW THE INSTRUCTIONS CAREFULLY. RETAIN PACKAGING DETAILS FOR
FUTURE REFERENCE. COLORS AND CONTENTS MAY VARY. RETAIN INSTRUCTIONS FOR FUTURE
REFERENCE. CONTAINS PHENOXYETHANOL AS A PRESERVATIVE.
PATENT PENDING.
WARNING :
CHOKING HAZARD
Small parts. Not for children under 3 years.
PRINTER TO REPLACE WITH FSC LOGO
www.beastlab.com
©2022 The Moose Group
FAQ’s
Where can I find troubleshooting videos and additional information?
You can scan the provided QR code or visit the website
www.beastlab.com for troubleshooting videos and
more information.
How do I enter Supercharged Mode?
To enter Supercharged Mode, make sure the Power Mode Switch is in the up position (Creation Mode). This will activate Supercharged Mode.
How can I confirm if I am in Supercharged Mode?
You can confirm if you are in Supercharged Mode by looking at the Alarm LED. If it is glowing red, you are in Supercharged Mode.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>