LUMISIGN 86x86x18mm Wireless Motion Sensor LED Night Light User Manual
- June 16, 2024
- LUMISIGN
Table of Contents
LUMISIGN 86x86x18mm Wireless Motion Sensor LED Night Light
Product Information
Specifications
- Material: ABS Plastic
- Power supply: USB charging with built-in battery
- Rated power: 0.6W
- Rated voltage: 5V
- Sensing distance: [insert sensing distance]
Product Usage Instructions
Charging the Night Light
To ensure proper functionality, charge the night light before using it for the first time.
- Connect the provided USB charging cable to the night light’s charging port.
- Plug the other end of the USB cable into a power source, such as a computer or wall adapter.
- The LED indicator on the night light will turn red to indicate that it is charging.
- Once fully charged, the LED indicator will turn green.
Mounting the Night Light
Choose a suitable location to mount the night light. It is recommended to place it in an area where motion detection is required, such as hallways, staircases, or bedrooms.
- Select a flat surface or use the included adhesive tape to attach the night light.
- Ensure that the mounting surface is clean and dry before attaching the night light.
- Remove the protective film from the adhesive tape and firmly press the night light onto the surface.
Motion Sensor Settings
The night light is equipped with a motion sensor that detects movement in its vicinity. You can adjust the motion sensor settings to suit your needs.
- Locate the sensor sensitivity adjustment switch on the side of the night light.
- Slide the switch to the desired sensitivity level. The available options may vary depending on the model.
- Test the motion sensor by walking in front of it to ensure it detects motion correctly.
Usage Modes
The night light offers different usage modes to accommodate various preferences and scenarios.
- Auto Mode: In this mode, the night light will automatically turn on when motion is detected and turn off after a preset time of inactivity.
- Manual Mode: This mode allows you to manually control the night light. Press the power button to turn it on or off as needed.
Frequently Asked Questions (FAQ)
- Q: How long does the battery last on a full charge?
- A: The battery life depends on usage and motion detection frequency. On average, the battery can last up to [insert battery life] on a full charge.
- Q: Can I use the night light outdoors?
- A: No, the night light is designed for indoor use only. It is not waterproof and should not be exposed to rain or extreme weather conditions.
- Q: Can I adjust the brightness of the night light?
- A: No, the night light has a fixed brightness level. However, the LED technology used ensures a soft and gentle illumination without being too bright.
Product Description
Wireless Motion Sensor LED Night Light
- Material: ABS Plastic
- Power supply: USB charging with built-in battery
- Rated power: 0.6W
- Rated voltage: 5V
- Sensing distance: <3-6m
- Product size: 86x86x18mm
- Colour temperature: Warm White
Instructions for use
- The product does not need wiring and is easy to install. lt can be widely used in bedrooms, wardrobes, cabinets, stairs, sun Spaces with lighting requirements such as platforms and carriages
- If the environment is bright, the night light will automatically enter the dormant state, and at night when a person enters the scanning area of 3 to 6 meters In the domain, the night light will automatically turn on the light when it senses the human body temperature and turns off the light after the person leaves for 25 seconds.
- Built-in high-quality lithium battery, the red light is on when charging, and the red light is off when fully charged, it can be connected to a mobile phone charger or battery Brain USB port for charging.
- The product base is attached with a magnetic sheet, which can be directly adsorbed on the iron surface, or the matching quadruple iron can be used The sheet (with 3M adhesive) is adsorbed on any surface.
Instructions for recycling and disposal
- This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.
- A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.
Read User Manual Online (PDF format)
Loading......