SEORETLAB PRO Professional Footrest User Manual
- June 16, 2024
- SEORETLAB
Table of Contents
PRO Professional Footrest
PRO-GRADE ERGONOMICS with CloudSwap™ Technology
When we set out to create the best performance gaming chairs in the world, we
made it our commitment to continually listen to feedback from our community.
The Secretlab Professional Footrest (CloudSwap™ Technology) you’ve just
unboxed is the pro-grade accompaniment to your Secretlab gaming chair,
designed for professionals and gamers who desire peak performance. Take full
control over your preferred dynamic and stationary ergonomic support from head
to toe.
PATENT-PENDING
SORET SECRETLAB PROFESSIONAL FOOTREST (CLOUDSWAP™ TECHNOLOGY
INSTALLATION GUIDE
FOOTREST TOP ATTACHMENT
Position the mat by aligning the top and bottom cutouts to the Footrest
Pro’s pedal neck (grey) and bottom clip (red).
Press down around the edges of the Footrest Top to secure it onto the
footrest.
Note: Only for CloudSwap™ Compatible Footrest Tops
PRODUCT SPECIFICATIONS
Platform Size: 554 (L) x 349 (W) (21.8 x 13.7″)
Product Height: 110 mm (4.3″)
Height Adjustment Range: 110 – 130mm (4.3 – 5.1″)
Angle Adjustment Range: +15°/-15°
Max Load Capacity: 60kg (1321b)
AFTERCARE GUIDE
Do not use Footrest Pro outside of its intended usage.
Improper use can damage Footrest or even cause injuries. For safety, always
follow the given instructions.
Deep cleaning.
Dampen a cloth with warm water and gently wipe down the velour surface. Blot
dry with a clean cloth immediately and leave to air-dry. Da not soak the
Footrest Top in water.
Clean the Footrest Top with a damp cloth.
Like all fabrics, velour may become dirty over time. For general cleaning,
dust the velour surface gently with a clean, dry cloth. Do not rub the velour
harshly to avoid damaging it.
Avoid exposure to direct or prolonged sunlight.
Direct and prolonged periods of sunlight or heat sources may cause fading and
cracking of the surface finish.
Do not abuse it.
Keep Footrest away from impacts, drops and sharp objects. Do not bend or fold
the Footrest Top.
Avoid heat.
Avoid the use of a hair dryer or any other heat source to dry the product.
Always leave to air-dry.
Avoid placing on porous surfaces
Placing Footrest on untreated concrete floor might cause staining on the
floor.
USAGE INSTRUCTION
Angle adjustment in STATIONARY MODE
Stationary Mode is a static feature where you can adjust and lock at any angle
between +15° to -15°
**** Please do not stand on the product.
-
First, position your right forefoot on top of the adjustment pedal, and your left forefoot to the bottom of the Footrest Top.
-
Step on the pedal fully with your right forefoot to unlock the angle adjustment of the Footrest Pro.
-
While the pedal is still fully depressed: Tilt upwards by pushing down with your left forefoot. Tilt downwards by pushing down with your right forefoot.
-
Once the Footrest Pro is in the desired position, lift your right forefoot fram the pedal to re-engage the angle adjustment lock.
Switching to DYNAMIC MODE
Dynamic Mode is a free movement feature that allows you to rock between +15°
to -15°.
-
The Secretlab Footrest Pro should come in Stationary Mode by default, with the switch located at the back set to Stationary Mode.
-
To enable Dynamic Mode, press the pedal down fully and slide the switch towards the right.
Note: Make sure the pedal is locked in place before letting go. -
Dynamic Mode is now active.
Note: To return back to Stationary Mode. press the pedal down fully and
slide the switch towards the left.
ERGONOMIC TIPS
Precise ergonomics and pro-grade support, all in one footrest.
The Secretlab Professional Footrest (CloudSwap™ Technology) — or Footrest Pro
— elevates your overall sitting experience, Our Ergonomics Advisory Board
shares tips on how you can utilize your new footrest for better sitting
posture and circulation.
Keep
your knees bent at 90°
With the soles of your feet in full contact on Footrest Pro, adjust your
chair height ta keep your knees comfortably bent at 90° and level with or just
below your hips.
This helps to reduce pressure on your glutes, hamstrings, back of knees and
buttocks, letting you stay supported and well relaxed. 
Maintain your ankles in neutral position
Lock the footrest at 0° incline when sitting in an upright position, with
your knees bent at 90°. If the footrest 1s shifted further away under the
desk, increase the incline angle of the footrest to maintain a neutral ankle
position.
Avoid having the footrest tucked directly below your chair.
Move for better circulation
When sitting for prolonged periods, move your legs from side to side across
the surface at least 2-4 times per hour.
Alternatively, switch to Dynamic made for some light exercise. Keep one foot
on the floor for stability, and slowly perform ankle pumps by rocking the
footrest back and forth with the other, Switch to the other foot after 30-40
seconds.
Stretch to reduce stiffness
Calf Stretch: In Stationary mode at 0°, place the pads of your feet on the
edge of the footrest with the heels hanging off, Push the heels towards the
ground — without lifting your feet from the footrest — until you feel a
stretch at the back of the calf. Hold for 30-60 seconds.
Foot Stretch : In Stationary mode at 0°, place your forefoot on the edge
of the footrest, with the heel above the ground, Gently push the heel toward
the ground — without lifting your foot from the footrest — until you feel a
stretch at the bottom of the foot, Hold for 30-60 seconds.
USE AND LIABILITY
The Secretlab Professional Footrest is designed for indoor use and dry work
areas only. Under no circumstances does the manufacturer accept warranty
claims or liability claims for damages caused from improper use or handling of
the Footrest.
https://secretlab.co/pages/support
For warranty terms and service or any other queries, scan the QR code or visit
our website secrettab.co/support.
OTHER LANGUAGES
https://secretlab.co/resources-footrest-pro-cloudswap
To view this manual in the following languages, please scan the QR Code to the
left.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>