Smhawk R35 Multifunctional Detectors Instruction Manual
- June 16, 2024
- Smhawk
Table of Contents
Multifunctional detector
Instruction Manual
Please read the instructions carefully before using the product, and keep it properly. Refer to the help guide.You can get basic operation instructions for the detector through this user manual. For more help,
INTRODUCTION
This product can accurately find out: hidden cameras, sneak cameras, wireless bugs , strong magnetic gps transmitters, which can effectively prevent sneak shots, eavesdropping, tracking, cheating, and protect ersonal privacy and confidential information security.
Frequency detection range | 1 MHz — 6.5GHz |
---|---|
Detection sensitivity | 6 levels |
Power supply | Built-in 650mA rechargeable battery |
Battery life | 36 hours of continuous work, 60 days of standby |
Weight | 60 grams |
Size | 11.440.98cm |
3 detection modes | 1.RF Radio Frequency Signal Detection. |
2.Infrared Radiation Mode.
3.Magnetic Field Detection.
Prepare
Preparation 1 Check the accessories
- bug detectors anti-spy detector
- Probe for Magnetic Field Detection
- USB Charging Cable
- User’s Manual(English)
Preparation 2 Understand Lookup Components and Operate Buttons
① probe port | ② Optical filter |
---|---|
③ On/off key | ④ Sensitivity increase key |
⑤ Sensitivity decrease key | ⑥ Mode key |
⑦ Sensitivity signal light | ⑧Radio Frequency Signal light |
⑨ Magnetic field detection light | ⑩ Chargeable indicator |
11 Micro USB port | 12 Infrared laser LED light12 |
Preparation 3 Charge the detector
Plug the Micro USB connector of the attached data cable into the Micro USB
port of the detector and the USB port t the other end into the USB port of a
running computer or USB socket to charge the detector.
low power | yellow indicator light on |
---|---|
charging | The Red indicator light is always on |
full charge | The Green indicator light is always on |
INSTRUCTION
- “Radio Frequency Signal” detection mode4
(1).push the on / off buttons upwards. After hearing the “beep” sound, the Radio Frequency Signal detection indicator lights up, and the device is in the power-on state.
(2).The detector is set to Radio Frequency Signal detection mode by default when it is turned on.Slowly move the detector, when the detector is close to the suspicious location, the sensitivity signal light starts to flash, and the buzzer alarm has a “beep beep beep” sound prompt, indicating that a wireless signal transmitter is detected nearby. 
-
“Infrared Radiation” detection mode
(1).Push the on /off buttons upwards. press the mode button twice to switch to the “infrared light irradiation” mode, and the Infrared laser LED light of the detector light up, proving that this mode has been turned on.
(2).Slowly move the detector,find the red reflective point through the filter lens on the detector,confirm it with the eyes to find the hidden camera. -
“Magnetic Field ” detection mode
(1).Install the magnetic field probe, insert the magnetic field probe into the upper probe Port of the detector.(2).Push the on /off buttons upwards. press the mode button once to switch the detector to the magnetic field detection mode, and the magnetic field detection light is on.
Slowly move the detector,When the strong magnetic GPS Tracker was find ,the buzzer alarm has a long “beep “sound prompt,and the LED light of probe head will be on at the same time.
-
Attention:
Use the “Magnetic Field ” detection mode to find weak magnetic GPS trackers may
be missed and need to be checked again using the Radio Frequency Signal”
detection mode.
Application Scenario Detectable
Device
Precautions:
- Do not carry your mobile phone or need to set the airplane mode when using it.
- Please move slowly during the detection process to avoid omissions.
- In infrared mode, close the curtains and keep the environment dark.
- Do not irradiate eyes directly.
- Magnetic mode can only detect tracker devices with strong magnets etc.
Frequently Asked Questions
QUESTION: Why the power does not turn on, or the power switch does not work?
ANSWER: The detector's yellow charging indicator lights up, indicating that the device is in a low battery state and needs to be charged.
QUESTION: After turning on, the beeping beeps continuously, and the alarm sound is issued.
ANSWER: 1. The smart phone you carry with you is not in the standby state with the lights off, but the mobile phone itself sends out wireless signals. It is recommended not to carry the mobile phone or set the flight mode when using the discovery machine to avoid signal interference. 2. There are suspicious items nearby or someone talking on a mobile phone nearby. 3. There is a wireless signal or it is too close to the wireless router.
QUESTION: Regarding the three modes, which one do I need to use under what circumstances?
QUESTION: Where are hidden cameras usually hidden?
ANSWER: Suspicious places : 1. USB outlets 2. Alarm clocks 3. Cell phone batteries 4. Car keys or key rings 5. Ballpoint pens 6. USB sticks or flash drives 7. Small speakers 7. Light bulbs or fire alarms.
WARRANTY POLICY
The whole machine and its accessories will be replaced free of charge within
one month from the date of receipt of the product according to the specific
fault conditions. Please keep your Amazon order number, this guarantee is
provided whenever you acquire your product from an authorized reseller.
The following conditions are not covered by the warranty
- Fault damage caused by unauthorized disassembly, repair, modification, or abuse;
- Natural wear and tear of product accessories (housing, charging cable, magnetic probe, packaging);
- Failure or damage due to human factors, water ingress, damp, etc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>