SIBIONICS GS1 CGM System User Guide
- June 16, 2024
- SIBIONICS
Table of Contents
GS1 CGM System
Quick Start Guide
Get Started
https://guide.sibionics.com/cgm-app/
Please use your phone camera to scan the QR code above to download the SIBIONICS App.
Set Up the App
Step 1:
Sign up with your registered email or follow the instructions to register an
account with your email.
Step 2:
Follow the App instructions to set up your App.
Get Ready
Step 1: Select a site on the back of your upper arm.
Step 2: Use an alcohol wipe to remove any oily
residue and allow your skin to dry before applying the sensor.
Step 3: Peel off the lid on the
sensor pack.
Caution: The
pack should be put on a flat desktop.
Step 4: Uncover the cap from the sensor applicator.
Press the sensor
applicator firmly down on the pack until it comes to a stop.
Step 5: Lift the sensor applicator
out of the sensor pack. 
If the sensor is not ready to apply, please repeat Step
4.
Step 6:
Press and pull the safety clip out. Step 7: Place the sensor applicator
over the site and push the button down.
Now your sensor is well applied.
Use SIBIONICS App
Open the App and click the button “Scan the code to connect”.
Use the camera to scan the QR code on
the box.
Sensor warm up
timer tells you when you will start getting readings.
Replace your Sensor
Your sensor automatically stops working after 14 days and must be replaced.
You should also replace your sensor if you notice any irritation or discomfort
at the application site.
Now you complete the quick guide and can explore the app by yourself now. Go
to the User Guide to find out more.