Landiao D8 Bluetooth Headset Installation Guide

D8 Bluetooth Headset

Quick Operation Guide

1.Boot to prepare

1. Take out the headset.

2. Open the charging compartment.

3. Place the inside of the charging box to close the cover, and open the charging box after 3 seconds to pair.

2.Turn on the headset
Open the charging compartment, the indicator lights of the headset flash alternately, and a utomatically pair with each other

3.Headphone pairing

1. Find the D8 from the bluetooth list and click connect.

2. The indicator light of the headset flashes during pairing. After the connection is successful, the indicator light will go out and the sound of successful connection will be broadcast.

4.Headphones off Put the earphone back into the charging compartment and close the cover, it will automatically shyt down and chargeThe charging compartment on the oy 3t this time, the display of the charging box lights upDisplay battery
1.Music Controls – Play/Pause Click to touch either side of the headset
Music Control – Switch Songs Double-click the left ear to switch to the next song, double-click the right ear to switch to the previous song
answer/hang up
  answer the phone Click to touch either side of the headset Hang up the phone Click to touch either side of the headset
reject the call When an incoming call occurs, long press and touch the earphoneson either side for 1 second
volume adjustment
– Triple tap left ear to decrease volume
– Triple tap right ear to increase volume
Power display
Press and hold for one second to display the battery

Foreword

Thank you for purchasing our products. Before using this product, please read this manual carefully, please be sure to keep this manual for future refere
Precautions

1. Do not use the machine in extremely hot, cold, dusty and humid environments.
2. Do not drop, hit, or vibrate violently during use.
3. Product performance and functionality are subject to change without notice.
4. The earphones contain batteries and should not be exposed to sunlight, fire or similar excessive heat.

Product description

3D schematic

Connect to Bluetooth device

1. Open the charging box, the indicator lights of the earphones flash alternately, and they are automatically paired with each other.
2. After the pairing is successful, the single indicator light of the headset flashes, turn on the mobile phone or other bluetooth device to search for the bluetooth name, search for the bluetooth headset name D8, and click connect.
3. After the headset is connected to a mobile phone or a Bluetooth device, the headset indicator will turn off.

Headphone Operation Function Description

1. When there is a call, touch the left and right earphones to answer the call; touch for one second to reject the call.
2. When playing music, double-click the left ear for the next song, and double-click the earphone for the previous song.
3. When the mobile phone is not connected, triple-click to switch between Chinese and English; after connecting to the mobile phone, triple-click the left ear volume to decrease, and triple- click the right ear volume to increase.
4. Switch between five-click game mode and music mode.
5. Press and hold for 5 seconds to switch the machine.

Headphone battery display

1. When there is no incoming call, press and hold any earphone for 1 second.
   After the battery is displayed for 5 seconds, it will automatically turn off.

Description of charging case

1. The earphones are automatically charged in the charging box, and the charging box is attached to the box.
   At this time, the display of the charging box lights up to show the power level; the left ear charging shows L, and the right ear charging shows R; it automatically turns off after 10 seconds.

2. Open the charging box, the charging box displays the power.

3. When charging the charging box, the power display is always on.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>