SPARQ AUDIO CD23 VibeMax Party Speaker User Manual

June 16, 2024
SPARQ AUDIO

2500 WATTS 8″ 2400 mAh
VSA-52

Booming 8ass high Performance Audio
volume Control dial LEO Fl,.me display

PACKAGE CONTENTS.

  • 1x Speaker
  • 1x USB Charging Cable
  • 1x Microphone Included
  • 1x User Manual
  • 1x Remote Control

SPECIFICATIONS

Output Power. 20W
Bluetooth Specification: V5.O
Operating Distance: 1Om
Battery Information: Built-in Rechargeable 2400mAh Lithium-ion
Input Voltage DC 5V
Battery Capacity: 3.7V 2400mAh
playback time: Approx. 3hrs
Charging time: Approx. 4hrs
S/N ratio: 508
Multimedia Input: Micro SD/US8

SPECIFICATIONS

Bluetooth Version 50 Output 20w
Operating Distance >33f/10M Charging Time 4 Hours
Speaker Output 20W Play Time 3 Hours
Subwoofer Size 8 Battery 2400mAh

SPEAKER BUTTON FUNCTIONS

  1. LED: 12 kinds RGB light modes
  2. MODE button; Auto search in FM mode & AUX mode
  3.  /V- Previous track / VOL­
  4. / SCAN: Play/Pause & TWS
  5. /V+Next track / VOL+
  6. ECHO. Bass Control (-/+)
  7. . AUX IN
  8. OFF/ON Volume Power
  9. Charging port: (DC SV)
  10.  Micro SD(TF) card slot
  11. USB slot
  12. Mic. Volume: (-/+)
  13. Mic IN “KARAOKE” Mic Cable Entrance

CHARGING E POWERING ON YOUR SPEAKER

  1. Use the included US8 cable to fully charge the speaker for a minimum of 4 hours before first use When charging the LED indicator light will be on.
  2. Flip the ON/OFF switch to turn on or off the speaker.

BLUE TOOTH. PAIRING WITH YOUR DEVICE

  1. Once powered on, the speaker will automatically Gentoo PAIRING MODE.
  2. Pairing mode will last for 2 minutes. While in pairing mode, turn ON the Bluetooth connection on you device, scan/search & select VSA-52.
  3. Once paired successfully, speaker will voice prompt ‘CONNECTED’.

HOW TD CONNECT THE UNIT

Turn on the speaker unit and the Mobile or other devices, and sear or the unit’s model name “VSA52 to pair the two devices, nce paired before, it will automatically connect after the unit turned on.
WRELESS Turn on the speaker and it will come into the wireless mod directly. After pairing the device, it can play the music. Press button to play/pause Short press button to be previous track or next track, long press button to increase o decrease the Volume .
USB/IF CARD Insert the t flash memory or IF card into the 0SB/T lot, VSA-52 wilt read the M3 format music automatically. Press button to Play/Pause. Short press button to
devious track or next track, long press button increase or decrease the Volume

FM RADIO- Press /SCAN to search ram channels automatically. This operation will scan alt FM stations and Pre-record them to memory he scan procedure will take several minutes and cannot interrupted Once completed, short press button to devious track or next track, long press MN or Teuton increase or decrease the Volume

RGB LIGHT MODE-There are 12 kinds different RGB light modes. Shor rests “MDOE” button to swatch between different light modes. lone ores to turn off and turn on the lights.
WS- Two the same model speakers can be connected to on ireless device at the same time. First, turn the speakers on, the hose one unit and long press its “MODE” button for several seconds hen you will hear the sound of “DING~” to indicate that the two unit: have paired successfully. Please ensure before pairing that the tw nits are not connected with other devices.
HARGING- Plug the USE cable into the speaker’s charging port an connect to the power source, he red LED indicator on panel will be lil when Lye until is charging.

NOTE

This equipment has been tested and found to comply with the limit or a Class B digital device pursuant to part 15 of the FCC Rules hose limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, used and can radiate radio frequency energy, and if no nstalled and used in accordance with the instructions may coos armful interference to radio communications However there is guarantee that interference why not occur in a particular installation f tis equipment does cause hammed interference to radio television reception, which be determined to by turning the equipment off and on, the user is encouraged to try to correct the
interferences by one or more of the following measures orient or relocate the receiving antenna. Increase the separation tween the equipment and receiver connect the equipment into ar butler on a circuit different from that to much the receiver  connected. Consult the deal or an experienced radio/Tv technician or help.

SAFETY G CARE INSTRUCTIONS

Do NOT expose any portion of this product to liquid, humidity moisture, sharp objects, or extreme temperatures as this car bioimage it and void the warranty.
DO NOT attempt to modify or disassemble this product in any way Spot Clean ONLY.
Adjust the speaker volume to a suitable level to avoid hearing bailage or the damage to the speaker

WARRANTY

para Audio,
Inc. warrants to the original retia purchaser that this product will be free of defects material and workmanship for up to 2 years of throduct from the original date of purchase.
hould any such defect occur, Spare Audio, Inc greens, at it’s sole discretion, to repair or replace this product with the same or similar item at no charge t he original purchaser This warranty does not cove isuse, neglect, accident or abuse.
exercise the aforementioned warranty, please visit urn website, www.spar@audio.com for more information.

¢2023 Spark Audio, Inc. All rights reserved, All rights reserved No portion of this package may produced or transmitted in any form or by Andeans without the express written permission from para Audio,
Inc.. Unauthorized reproduction o distribution of this package, design, or any portion o t will be prosecuted to the maximum extent possible der law All brand names and trademarks belong t heir respective owners.

ANUFACTURED BY.
para Audio, Inc. S Jules Lane, New Brunswick, NJ 08901

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals