inse S10 Vacuum Cleaner User Guide
- June 16, 2024
- inse
Table of Contents
inse S10 Vacuum Cleaner
Product Information
Specifications
- Model: S10
- Power Source: Electric
- Voltage: [Insert Voltage]
- Power Consumption: [Insert Power Consumption]
- Weight: [Insert Weight]
- Dimensions: [Insert Dimensions]
Product Usage Instructions
Installation
To install the vacuum cleaner, please refer to the User Manual for detailed
instructions.
Disassembling the Dust Cup
- Locate the Unlock/Lock Key on the vacuum cleaner.
- Rotate the Unlock/Lock Key to unlock the dust cup.
- Gently lift and remove the dust cup from the vacuum cleaner.
Starting and Stopping the Vacuum Cleaner
- To start the vacuum cleaner, press and hold the main switch. Release the switch to stop immediately.
- For continuous operation, short press the main switch. To stop the vacuum cleaner during continuous operation, short press the switch again.
Turning On and Off
- To turn on the vacuum cleaner, press the power switch.
- To turn off the vacuum cleaner, press the power switch again.
Disassembling HEPA and Stainless Steel Strainer
- Rotate the strainer in the indicated direction to remove it from the vacuum cleaner.
- Gently lift and remove the HEPA and stainless steel strainer from the vacuum cleaner.
Cleaning HEPA, Filter, and Stainless Steel Strainer
To clean the HEPA, filter, and stainless steel strainer, follow these
steps:
- Remove the strainer from the vacuum cleaner as mentioned in the previous section.
- Clean the strainer under running water, ensuring all dirt and debris are removed.
- Allow the strainer to dry completely before reassembling it back into the vacuum cleaner.
Frequently Asked Questions (FAQ)
-
Q: How often should I clean the HEPA and filte r?
A: It is recommended to clean the HEPA and filter at least once a month or when you notice a decrease in suction power. -
Q: Can I use the vacuum cleaner on wet surfaces?
A: No, this vacuum cleaner is only designed for dry cleaning purposes. Do not use it on wet surfaces. -
Q: How do I replace the filter?
A: Refer to the User Manual for instructions on how to replace the filter. It is important to use the recommended replacement filter for optimal performance.
For more installation instructions, please refer to the User Manual.
Combination
Ready to Use
Before first use, please fully-charge the battery 
How to operate the vacuum
Press the power switch to turn it on
How to Clean
How to disassemble dust cup
How to disassemble HEPA and stainless steel strainer
How to clean HEPA, filter and stainless steel strainer
Documents / Resources
| inse
S10 Vacuum
Cleaner
[pdf] User Guide
S10, S10 Vacuum Cleaner, Vacuum Cleaner, Cleaner
---|---