Radici USA Como Rectangular Fabric Rug Instructions
- June 16, 2024
- Radici USA
Table of Contents
Radici USA Como Rectangular Fabric Rug
Product Information
Specifications
- Brand: Professional Testing Laboratory Inc.
- Test Method Conducted: Surface Flammability of Carpets and Rugs
- Test Number: 0298873
- Test Standard: 16 CFR Chapter II, Subchapter D, Part 1630 CPSC FF 1-70 (also referenced as ASTM D2859)
- Test Sample Description: Como Cut Pile Polypropylene Woven Synthetic Carpet
- Country of Origin : Turkey
General Principle
This test method is designed to measure the response of finished textile
floor covering materials when exposed to an ignition source in controlled
laboratory conditions. It is applicable to all types of textile floor
coverings made from natural or man-made materials.
Test Criterion
In order to meet the acceptance criterion, the uncharred area of the test
specimen must be greater than one inch in at least seven out of the eight
specimens tested.
Test Results
| Specimen Number | Uncharred Area (Inches) |
|---|---|
| 1 | 3.4 |
| 2 | 3.5 |
| 3 | 3.5 |
| 4 | 3.5 |
| 5 | 3.5 |
| 6 | 3.5 |
| 7 | 3.5 |
| 8 | 3.5 |
Note: This sample was tested on the face side.
This sample passes the Federal Flammability Standard CPSC FF 1-70.
Product Usage Instructions
-
Step 1: Preparation
Ensure the carpet or rug is clean and free from any debris or obstructions. -
Step 2: Placement
Decide on the desired location for the carpet or rug and lay it flat on the floor. -
Step 3: Maintenance
To maintain the product’s fire resistance properties, avoid exposing it to open flames or excessive heat sources. -
Step 4: Cleaning
Clean the carpet or rug regularly according to the manufacturer’s instructions using appropriate cleaning methods and products. -
Step 5: Periodic Testing
To ensure continued compliance with flammability standards, it is recommended to periodically test the carpet or rug using the specified test method.
FAQ
-
What is the purpose of this test?
The purpose of this test is to measure the response of finished textile floor covering materials to an ignition source under controlled laboratory conditions. -
What types of floor coverings does this test apply to?
This test is applicable to all types of textile floor coverings, whether constructed from natural or man-made materials. -
How many specimens are tested?
Eight specimens are tested in total. -
What is the acceptance criterion for the test?
The uncharred area of the test specimen must be greater than one inch in at least seven out of the eight specimens tested. -
How often should I test my carpet or rug?
It is recommended to periodically test your carpet or rug to ensure continued compliance with flammability standards.
TEST REPORT
GENERAL PRINCIPLE
This test method is intended to measure the response of finished textile floor covering materials when exposed to an ignition source under controlled laboratory conditions. It is applicable to all types of textile floor coverings whether constructed from natural or man-made materials.
TEST CRITERION
The uncharred area of the test specimen must be greater than one inch in at least seven of the eight specimens tested in order to meet the acceptance criterion.
TEST RESULTS
NOTE: This sample was tested on the face side.
This sample PASSES the Federal Flammability Standard CPSC FF 1-70.
ABOUT COMPANY
- 714 Glenwood Place
- Dalton, GA 30721
- 706-226-3283
- Fax: 706-226-6787
- protest@optilink.us
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>