Mormoque G5 Neckband Headphone User Manual

Mormoque G5 Neckband Headphone

Product Information

Specifications

• Model : G5
• Country of Origin : China
• Manufacturer: Mormoque Electronic Technology (Dongguan) Co., Ltd
• Manufacturer Address : Room 401, Building 5, No. 1, Yuexing South Road, Hengli Town, Dongguan City, Guangdong Province, China
• Customer Service Email : mormoque@foxmail.com

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Product Usage Instructions

Section 1: Safety Precautions

Before using the G5, please read and understand the following safety precautions:

• Do not expose the device to water or other liquids.
• Avoid using the device near flammable materials.
• Keep the device away from extreme temperatures and direct sunlight.
• Do not disassemble or attempt to repair the device yourself. Contact customer service for assistance.
• Avoid using the device if you have a pacemaker or other medical implants. Consult your physician before use.

Section 2: Initial Setup

To set up the G5, follow these steps:

1. Unpack the device and ensure all components are included.
2. Charge the device using the provided charger and cable.
3. Power on the device by pressing and holding the power button.
4. Follow the on-screen instructions to complete the initial setup process.

Section 3: Basic Operation

To use the G5, follow these steps:

1. Ensure the device is charged and powered on.
2. Press the desired function button on the device to perform the corresponding action.
3. Refer to the user manual for specific instructions on each function and feature.

Section 4: Maintenance and Care

To keep your G5 in optimal condition, follow these maintenance and care guidelines:

• Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Avoid dropping or subjecting the device to impact.
• Store the device in a cool, dry place when not in use.
• Regularly update the device firmware as recommended by the manufacturer.

Section 5: Troubleshooting

If you encounter any issues with the G5, try the following troubleshooting steps:

1. Restart the device by turning it off and on again.
2. Check the battery level and ensure it is adequately charged.
3. Reset the device to factory settings as instructed in the user manual.
4. Contact customer service for further assistance.

Section 6: Warranty

The G5 comes with a limited warranty. Please refer to the warranty card included in the packaging for detailed terms and conditions.

FAQ

Q: Can I use the G5 underwater?

A: No, the G5 is not designed to be used underwater. It is not waterproof.

Q: How long does the battery last?

A : The battery life of the G5 depends on usage. Under normal conditions, it can last up to X hours on a full charge.

Q: Can I use the G5 with other devices?

A: Yes, the G5 is compatible with various devices that support its connectivity options. Please refer to the user manual for more information.

Q: How do I update the firmware of the G5?

A : To update the firmware, connect the G5 to a computer and download the latest firmware from the manufacturer’s website. Follow the provided instructions to complete the firmware update process.

APPEARANCE AND PARAMETER

Button illustration:

1. Multi-function Button
2. Туре-С
3. LED indicator
4. Volume-/Previous Track
5. Volume+/Next Track
6. MIC

CHARGING YOUR EARPHONE

Your Bluetooth earphones come with a built-in rechargeable battery and a charging cable

Charge fully before use

Using the charging cable through the corresponding port to charge the battery, the LED indicator will show red while charging, and show blue once fully charged.

GETTING STARTED

To use your Bluetooth earphones, please follow the steps below:

1. Ensure your Bluetooth earphones are fully charged.
2. Pair your Bluetooth earphones to a Bluetooth-enabled device prior to use. (See Pairing instructions)

Powering On the Earphone

Press and hold the Multi-Function Button for 3 seconds until blue lights on

Powering Off the Earphone

Once powered on, press and hold the Multi-Function Button for seconds until red lights on and out.

PAIRING YOUR EARPHONE

1. Power on your Bluetooth earphones
2. Press and hold the Multi-Function Button for approximately 5-6 seconds until the indicator flashes blue and red alternatively, your earphones are now in paining mode.
3. Activate the Bluetooth function of your devices and start to search.
4. The indicator will flash blue every 10 seconds once successfully paired/connected.

Note:

1. The earphones should be within 30ft range from your Bluetooth devices while pairing/playing.
2. The earphones will automatically power off without connection for 5 minutes

GAME MODE

Triple-click the function to activate Game Mode (low latency).

MUSIC MODE

• Adjust Volume
  • Short press the Volume+ to raise the volume or Volume- to lower the volume. You can also adjust the volume by your Bluetooth devices.
• Play/Pause Music
  • Once connected, short press the Multi-Function Button to play or pause music.
• Previous Track
  • Press and hold the Volume- 1 second to the previous track.
• Next Track
  • Press and hold the volume+ 1 second to the next track.

CALL MODE

• Answering a Call

  • Short press the Multi-Function Button to answer an incoming call, or answer the call normally via your mobile phone.

• Rejecting a Call

  • Press and hold the Multi-Function Button for 2 seconds to reiect the incomina calli

• Ending a Call
  Short press the Multi-Function Button to end the call or end the call directly from your mobile phone.

• Redialing a Call
  Double click the Multi-Function Button to redial the last dialed phone number on your mobile phone.

• Voice Assistant
  Once connected, press and hold the Multi-Function Button for 2 second to access voice assistant of your smart phone.

LED INDICATOR

Specifications

• Bluetooth Version: 5.2
• HSP/HFP/A2DP/AVRCP/SBC|
• Frequency: 2402 MHz- 2480 MHz Weles distance up an 10 mete 20k2

Chaeiro tinesbou hours

• Battery capacity: 150 mAh + 150 mAh : Per imes bout 28 hours in 70s volume

• Weight devices : 289

• Contents of package : charging cable USB-C, headset, user’s manual, warranty card, 2 earbud

• Manufacturer: Mormoque Electronic Technology (Dongguan) Co., Ltd

• Address : Room 401, Building 5, No. 1, Yuexing South Road, Hengli Town, Dongguan City,

• Guangdong Province, China

• customer service :  Choque@foxmail.com

FCC Caution : This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Comp changes or modificatiss not expires pratvat by im party responsible for

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>