nVent 635803 Copper Bonded Ground Rod Instructions
- June 12, 2024
- nVent
Table of Contents
COPPER-BONDED GROUND ROD, THREADED, 5/8″ DIA, 10′, 13 MIL PLATING, 8.5 LB
CATALOG NUMBER
635803
CERTIFICATIONS
FEATURES
Cold-rolled threads with continuous, unbroken grain flows preserve copper
coating and are stronger than cut threads
99.9% pure electrolytic copper coating
Rods have a high carbon steel core and tip that provide superior strength when
driving
Copper coating will not crack when bent or tear when driven
Minimum copper coating of 10 mils on rods listed to UL® 467
nVent ERICO name, length, diameter and part number is roll-stamped within 12″
(304,8 mm) of chamfered end
UL logo and control number where applicable stamped on each rod for easy
inspection after installation
PRODUCT ATTRIBUTES
Material: Copper-Bonded Steel
Tensile Strength: 80,000 psi Min
Thread Location: Pointed and Chamfered Ends
Ground Rod Diameter, Nominal: 5/8″
Ground Rod Diameter, Actual: 0.561″
Thread Size: 5/8″ UNC
Length: 10′
Plating Thickness: 13 mil
Unit Weight: 8.500 lb
Complies With: ANSI®/NEMA® GR1;IEC® EN 62561-2
ADDITIONAL PRODUCT DETAILS
For rods to be listed to UL® 467, they must be at least 8′ (2.44 m) in length.
IEC® EN 62561-2 supercedes EN 50164-2.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
North America
+1.800.753.9221
Option 1 - Customer Care
Option 2 - Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>