CONCEPTRONIC OZUL04BE 67W GaN USB PD Charger Installation Guide
- June 16, 2024
- CONCEPTRONIC
Table of Contents
CONCEPTRONIC OZUL04BE 67W GaN USB PD Charger
Product Information
Specifications:
- AC input: DC output
- Total power output
- Average active efficiency
- Efficiency at load 10%
- Operating temperature
- Storage temperature
- Operating humidity
- Storage humidity
- Size
- Cable length
Product Usage Instructions
- Plug the USB PD charger into a free wall outlet.
- Connect the USB-C connector to your USB-C device.
Safety and Warnings:
- Read the operating instructions carefully and especially observe the safety information.
- Keep the device away from water, humidity, fire, or hot environments.
- Keep your device and all its parts and accessories out of the reach of small children.
- Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
- Do not use the device if there are any signs of damage to the housing, plug, or cable.
- Avoid dropping, throwing, or crushing the device.
- Do not open, change, or damage the device.
- Confirm that the wall outlet provides the same type of power indicated on the device (both Voltage [V] and frequency [Hz]).
- Use the product only in dry indoor rooms and protect it from moisture.
- Disconnect the product from the mains before cleaning.
- Clean the product with a dry, fiber-free cloth.
Disposal of Waste Electrical Equipment:
Dispose of the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/disposal can harm the environment and/or cause injury.
CE Marking:
Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.
FAQ:
Q: Where can I find support for my Conceptronic OZUL04BE?
A: For support, visit our website at
www.conceptronic.net and click on ‘Support’. If
you cannot find the information you need, please contact us at
support@conceptronic.net.
Q: Can I use this charger with USB-C devices?
A: Yes, you can use this charger with USB-C devices. Simply connect the
USB-C connector to your USB-C device.
Connecting the Product
Specifications
| AC input | 100.0 ~ 240.0V 50/60Hz, 1.6A max |
|---|---|
| DC output | PD 3.0: 5.0V/3.0A, 9.0V/3.0A,12.0V/3.0A, 15.0V/3.0A, 20.0V/3.25A, |
20.3V/3.3A PPS: 3.3-21.0V/3.0A
Total power output| 67.0W Max
Average active efficiency| Output load with 3.3V/3.0A: 78.81% Output load with
21.0V/3.0A: 88.87%
Efficiency at load 10%| Output load with 21.0V/3.0A: 83.93%
Operating temperature| 0°C ~ 40°C
Storage temperature| -20°C ~ 80°C
Operating humidity| 20% ~ 80% RH
Storage humidity| 10% ~ 90% RH
Size| 50 × 29 × 40 mm
Cable length| 180cm
Congratulations on the purchase of your Conceptronic OZUL04BE.
When problems occur, we advise you to visit our support site (go to
www.conceptronic.net and click on ‘Support’).
If you have other questions about your product and cannot find it on our
website, please contact us at
support@conceptronic.net.
For more information about Conceptronic products, please visit the
Conceptronic website: www.conceptronic.net.
Installation & usage
- Plug the USB PD charger to a free wall outlet.
- Connect the USB-C connector to your USB-C device
Safety and Warnings instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
- Keep the device away from water, humidity, fire, or hot environments.
- Keep your device and all its parts and accessories out of the reach of small children.
- Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
- Do not use the device if there are any signs of damage to the housing, plug, or cable.
- Avoid dropping, throwing, or crushing the device.
- Do not open, change, or damage the device.
- Confirm that the wall outlet provides the same type of power indicated on the device (both Voltage [V] and frequency [Hz]).
- Use the product only in dry indoor rooms and protect it from moisture.
- Disconnect the product from the mains before cleaning.
- Clean the product with a dry, fibre-free cloth.
Disposal of waste electrical equipment:
Dispose of the product at a recycling point. Do not dispose of together with
household waste. Incorrect storage/disposal can harm the environment and/or
cause injury.
CE marking:
Conceptronic declares that this product complies with the directives listed in
the section ‘Declaration of Conformity’.
Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany
CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH
© Copyright Digital Data Communications GmbH. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>