Jindekai Technology P8B Headset Instruction Manual

Jindekai Technology P8B Headset

PRODUCT SPECIFICATIONS

• Bluetooth: Yes
• Speaker: General

PRODUCT USAGE INSTRUCTIONS

1. Play / Pause, Calling Button
   This button is used to play or pause audio playback. It can also be used to answer or end phone calls.

2. Volume Increase +/ Next Track
   Use these buttons to increase the volume level or skip to the next track during audio playback.

3. Volume Decrease – / Previous Track
   These buttons are used to decrease the volume level or go back to the previous track during audio playback.

4. Power On/Off Mode Button
   Press and hold this button to power on or off the headset. It also serves as a mode button to switch between different modes of operation.

5. Type-C Charging Port
   This port is used for charging the headset using a Type-C cable.

6. TF Card Input
   You can insert a TF card into this input to play audio files directly from the card.

7. AUX-IN MODE
   To use the headphones as ordinary headphones, insert a 3.5mm aux cable into the audio input port. The device will power off automatically, and the functions of wireless headphones will not apply anymore.

FAQ

• Can I use these headphones wirelessly?
  Yes, you can use these headphones wirelessly by connecting them via Bluetooth.

• How do I charge the headset?
  Use the Type-C charging port to connect the headset to a power source using a Type-C cable.

• Can I play audio files directly from a TF card?
  Yes, you can insert a TF card into the TF card input and play audio files directly from it.

• What happens when I use an aux cable?
  When you insert a 3.5mm aux cable into the audio input port, the device will power off automatically, and you can use the headphones as ordinary headphones without the wireless functions.

• How do I control audio playback and phone calls?
  Use the designated buttons on the headset to control audio playback (play/pause, volume adjustment, track skipping) and phone calls (answer/end).

OVERVIEW

HOW TO USE

1. Start-up: Long press the “ ” Button. The Headphones will start and enter “Bluetooth Mode” automatically, and the LED indicator light will flash Blue.
   Shutdown: Long press the “ ” Button, and the LED indicator Light turns off.

2. “+”: Increase Volume/ Select Next Track

3. “-”: Decrease Volume/ Select Previous Track

4. Answer or End the Call: Short press the On/Off Button “ ”

5. Reject a Call: Long press the On/Off Button “ ”

6. Redial: Short press the On/Off Button twice to redial the last number

7. TF MODE: Insert the TF Card, and the LED indicator light will turn blue with a short tone prompt. lt will play media automatically,

8. AUX-IN MODE: Insert the 3.5 mm aux cable in the audio input port. The device will power off automatically, and you can use the headphones as ordinary headphones functions of wireless headphones do not apply anymore.

SPECIFICATIONS

• Bluetooth
  • Version: 5.3
  • Chipset: JL 6955F
  • Range: Up to 10 m
• General
  • Battery: 200 mAh
  • Charging Time: 2 Hours
  • Charging Port Type: Type-C
  • Playback Time 2 – 6 Hours
  • Frequency Response: 20 Hz – 20k Hz
• Speaker
  • Driver Size: 40 mm
  • Impedance: 32 Ω
  • Sensitivity: 105 ±3 dB

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>