MOMO GLOW 0000010A Closet Lights Motion Sensored User Manual
- June 16, 2024
- MOMO GLOW
Table of Contents
MOMO GLOW 0000010A Closet Lights Motion Sensored
SPECIFICATIONS
| Width | height |
|---|---|
| 12.2” | 1.1” |
| Weight | power |
| 4.9 oz | 2,5 w |
| battery | Color |
| 1800 mAh | 4000 K |
| temperature | detection |
| -10ºC~40º | 10-13ft, 6-10ft. |
Controls-Functions / Parts
OFF
The light will not turn on.
ON
The light will remain on until battery runs out or function is changed.
AUTO
Mode for dark environments. When motion is detected, the Momo Glow will
automatically turn on. It will remain on, and turn off again 30 seconds after
final motion has been detected.
Content:
- 1 Momo Glow®
- 1 USB cable
- 1 magnetic holder
- 1 3M adhesive ®
Important safety measures
Basic safety measures should always be followed when using electrical appliances.
Precautions
- Important: Read all instructions carefully before using for the first time.
- To protect against fire, electric shock, and injury to people, do not place the USB cord or base in water or any other liquid. See cleaning instructions.
- Close supervision is necessary when any appliance is used by or near children.
- Disconnect the USB cable when charging is complete, before cleaning, and before fitting or removing parts
- Do not charge your appliance with damaged USB cables as this may cause damage to it. Contact Momo Lifestyle customer service for information about electrical or mechanical repairs and adjustments.
- The use of accessories not recommended by Momo Lifestyle can result in fire, electric shock, or injury.
- Do not leave the USB cable hanging over the edge of a table or counter, nor touch hot surfaces.
- This appliance is not a toy.
Important NOTES
Precautions
-
The sensor area cannot be covered.
-
Avoid placing the product near heat sources, such as oven cover, heating outlet, humidifier, and other places where the temperature changes abruptly.
-
Do not disassemble the product. This will also result in automatic loss of warranty.
-
Avoid letting the lamp receive direct sunlight.
cleaning instructions: -
For cleaning, use a soft cotton cloth.
Charging instructions -
After a long period of use, if there is a reduction in the brightness of the light, it means that the battery is running low, charge the product using the USB cable.
-
The red light indicates that the charging is in progress.
-
The green light indicates fully charged.
-
For longer battery life, the first charge should be complete.
Installation
instructions
- there are two ways to attach your lamp: By sticking the metal holder to the wall, cabinet, or desired location. First, remove the protective film from the double-sided adhesive and stick it behind the metal holder. Then, remove the protective film from the other side’s adhesive and stick it in the most appropriate place.
- By fixing it on any ferromagnetic surface that does not heat up. For example, a refrigerator.
Sensor Operating Area
specification
- The light turns on up to a distance of 3-4m in front of the sensor and 2-3m on the sides, covering a 120º angle around the sensor. The induction effect is related to ambient temperature, body shape, and movement speed.
CUSTOMER SERVICES
Contact us
+1 305 929 8850
care@momo-lifestyle.com
www.momo-lifestyle.com
Follow Us
momolifestyleusa
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>