Moonybaby Split 60 Baby Monitor Instruction Manual
- June 16, 2024
- Moonybaby
Table of Contents
INSTRUCTION MANUAL
Setup and use your digital video baby monitor
Installing Baby Unit
- Connect the small plug of power adapter to the Baby unit and push the DC Jack to the end to turn on baby unit. Only use the enclosed adapter (SV DC 1 OOOmA). You will see green LED is turned on.
- Place Baby Unit on a flat surface, such as a desk or shelf or mount the camera on a wall.
- Connect the small plug of power adapter to Parent unit and push the connector the end. Only use the enclosed adapter (SV DC 2000mA). Recommend charging time of at east 3 hours before first time use.
Precaution: use of battery for Parent Unit
When battery level is low, the power on off LED flashes red, monitors comes
with sound alert and battery icon on LCD display flashes red.
Extend life cycle of battery: Only charge the battery when the battery life
indicator is ow. Constant rechdffarging of your battery before the low battery
indicator ight comes on will decrease the life of your batteries.
Optimize battery life : Louder speaker evel consume more battery power and
shorten battery life. Switch on power saving mode and tune speaker sound level
to level 4 to have optimized battery life. 
Frequently Asked Questions
Battery not holding a charge/Monitor cannot turn on
Remove battery from battery compartment and reinstall battery.
Monitor cannot hold camera connection
Please check whether monitor is selected to CAMERA SCAN mode. Monitor switches between paired cameras around every 10 seconds. When monitor switch the camera which is not powered on, monitor display Lost Link. You could use SPLIT VIEW button to select the camera you want to watch.
Sound Bar
This sound bar is designed for deaf parents to reflect sound level picked up from camera. You could disable this display in menu.
Save more battery energy with ECO mode by switching off both screen and audio
Switch off “On screen tips”
We try to explain status and function on screen. When you are familiar with this monitor, you could switch off this on screen tips in menu.
Pairing Camera
Choose from unpaired cameras in Menu first, you would see pairing message shows up on screen. During the pairing message is on screen, press camera pairing button 3 seconds. When camera and monitor is paired, video is on screen automatically.
Optical Lens Accessory
Lens type: Default lens hood
Lens description: To protect camera actual lens inside from being
touched. There is no video effect when lens hood in on. Lens type: Optical
Wide Angle Lens (Additional Purchase) Lens description: Wide Angle Lens
view more in picture. Object become farther and smaller. Surrounded area are
in slight distortion. This lens is sold separately and recommended to be used
when you intend to have overview of the room.
CHOKING HAZARD
The Optical Lens and Lens hood are small parts. This is not for baby use or
for use as a toy. Keep camera unit and lenses away from Baby’s reach at all
times.
WARNING
STRANGULATION HAZARD – Children have STRANGLED in cords. Keep this cord
out of reach of children (more than 3 feet/1 meter away from the crib). Never
use extension cords with AC adapters. Only use the AC Adapters provided.
WARNING Adult assembly required. Keep small parts away from children when
assembling.
Warning Information
* Keep this nstruction manual for future reference.
- For adult use only.
WARNING
THIS PRODUCT CANNOT REPLACE RESPONSIBLEADULTSUPERVISION
- When an AC Adapter s plugged into an e ectrical outlet, do not the exposed end.
- Test baby monitor before first use, periodically, and when changing location of the baby unit(Camera).
- Do not use monitor near water (Such as bathtub, Sink, etc)
- Keep parent unit away from heat sources (Such as stoves, radiators, etc)
- Make sure there is proper ventilation around baby unit and parent unit.
- This product is not a toy. Do not allow children to play with it.
- The mains plug or an appliance coupler s used as the disconnect device, the disconnect device shall remain readily operable.
- The baby monitor should not be considered as a medical device. While using the baby monitor, t is strongly recommended to have an adult directly checking on your baby. Premature babies or children considered at risk must be supervised by your pediatrician or other medical staff.
Battery Warning
- Use only the original rechargeable battery provided.
- Do not shot-circuit supply terminals.
- Remove battery when product is stored for long periods of time or when battery s exhausted.
- Dispose of exhausted battery properly.
- Keep all batteries away from children.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Danger of explosion f battery is incorrectly replaced. Replace only with the same or equivalent type.
- Batteries (battery pack or batteries nstalled) shall not be exposed to excessive heat such as sunshine, fire or the like.
Precautions
-
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrics shock.
-
The baby monitor works better n temperature ranging between O°C and 40°C (32°F and 104°F)
-
Do not dismantle the appliance. It does not contain any parts that may be used independently.
-
Never Expose the baby monitor for ong per od to sun’s direct rays and never place it next to a source of heat, n a damp or very dusty room.
-
Never push objects of any kind nto this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any k nd on the product. -
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servic ng to qualified serv ce personnel.
-
The product should be mounted to a wall or ceiling nly as recommended by the manufacturer.
This device complies with Part 15 of the FCC Rules. Operation s subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any nterference received, including interference that may cause undesired operation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These imits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
nterference to radio communications. However, there is no guarantee that
interference will not occur n a particular installation. If this equipment
does cause harmful nterference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the nterference by one of the following measures:
- Reorient or relocate the receiving antenna .
- Increase the separation between the equipment and receiver .
- Connect the equipment into an outlet on a circuit different from that to which the receiver s connected .
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment. (Example – use only shielded nterface
cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The antennas used for this transmitter must be nstalled to provide a
separation distance of at east 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.
Moonybaby’s baby monitor warranty policy
Moonybaby will repair or replace (at our option) your unit free of charge for
12 months from the date of purchase f the unit is defective in workmanship or
materials. To claim your repair/replacement, the product must be returned to
Moonybaby together with a copy of the purchase receipt. In the absence of the
purchase receipt, the warranty will be 12 months from the date of manufacture.
This warranty does not apply to normal wear or damage from misuse, abuse,
improper storage and handling, installation, accident, unauthorized repair or
alteration. Please contact our Customer service by Facebook Moonybaby or via
email for details.
55812 www.fsc.org
MIX
Paper from responsible sources
FSC™ C139408
Documents / Resources
|
Moonybaby Split 60 Baby
Monitor
[pdf] Instruction Manual
Split 60 Baby Monitor, Split 60, Baby Monitor, Monitor
---|---