SYE MOT1ON Automatic 24 Watch User Manual
- June 16, 2024
- SYE
Table of Contents
USER MANUAL
MOT1ON
PUT ON YOUR FASTBACK™ STRAP
Original, innovative, with crisp lines and precisely set into the watch, the
Fastback™ strap is the pièce de résistance that makes your SYE MOTION watch so
exclusive.
Put on your Fastback™ strap by following these few simple steps.
STEP 1
Place your watch upside down on a soft and stable surface.
Holding the strap parts vertically, insert them directly into the watch case.
TIPS:
- The upper leather part of the strap should touch the edge of the watch case. If necessary, push the inserts A in so they fully fit into the case, particularly the first few times you set up a strap.
- The normal convention is to place the longer section of the strap at 6 o’clock and the shorter section at 12 o’clock.
STEP 2
> Place the locking plate B on top of the strap inserts you should
hear a light “click” sound.
Insert the screw C into the central hole.
TIP:
- · Make sure the locking plate is perfectly aligned with each of the 4 corners before you start to tighten the screw.
STEP 3
Take the Fastback™ tool or a hex key and place its head on the screw.
Turn the tool clockwise until you feel resistance. Your strap is now perfectly secured.
SET YOUR MOT1ON CHRONOGRAPH
A Couronne
B Hour hand
C Minute hand
D Chrono second hand
E Chrono minute hand (60 min)
F 24 hour hand
G Pusher (start/stop)
H Pusher (reset)
I Date window
Set the time
Pull the crown out to position 2.
Turn the crown to adjust the hour and minute hands (make sure the time is identical on the 24-hour subdial).
When the time is set, push the crown back into its normal (0) position.
Set the date
Pull the crown out to position 1.
Turn the crown clockwise to set the date.
When the time is set, push the crown back into its normal (0) position.
SET YOUR MOT1ON AUTOMATIC 24
Your MOT1ON Automatic 24 watch has a power reserve of 42 hours. When the watch stops, wind up the movement by turning the crown clockwise in the normal (0) position.
A Crown
B Hour hand
C Minute hand
D Second hand
E 24 hour hand
F Date window
Set the time
Pull the crown out to position 2.
Turn the crown to adjust the hour and minute hands (make sure the time is identical on the 24-hour subdial).
When the time is set, push the crown back into its normal (0) position.
Set the date
Pull the crown out to position 1.
Turn the crown counterclockwise to set the date.
When the time is set, push the crown back into its normal (0) position.
USE YOUR MOT1ON CHRONOGRAPH
- Start
- Stop
- Reset
Normal use
Press pusher G to start the chronograph. This starts the central second hand.
Press pusher G again when the event you are timing has finished.
Press pusher H to reset the chronograph.
- Start
- Stop
- Restart
- Reset
Cumulative time
Press pusher G to start the chronograph. This starts the central second hand.
Press pusher G again as many times as needed depending on the event you want to time.
When the event has finished, you can directly see the total time.
Press pusher H to reset the chronograph.
RECOMMENDATIONS FOR USE AND WARRANTY
Your SYE [Start Your Engine] MOT1ON watch was designed to provide you with a maximum dose of daily thrills with little maintenance. You can keep it shining with a microfiber cloth or clean its surface with a soft brush and soapy water after removing the strap.
Your Fastback™ strap will acquire a beautiful patina over time that will make your watch even more exclusive. Make sure, of course, to keep your strap away from you when swimming or showering or when you are around oily fluids it will never be able to thank you enough!
Your SYE [Start Your Engine] MOT1ON watch comes with a 2-year warranty. We took every step we could to ensure your watch stays with you as long as possible, but, like all mechanical objects, it won’t be pleased with shocks or risky situations.
To learn more about your watch, please refer to the sections on “Taking care of your SYE watch” and the warranty at www.syewatches.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>