SELVIM 20231228 Pro Phone Camera Lens Kit Instructions

SELVIM 20231228 Pro Phone Camera Lens Kit

BRAND INFORMATION

GET started properly
WATCH important videos tutorials
SCAN the OR code or visit the link https://selvim.com/

Have a question or need any help: support@selvim.com

LENS KIT CONFIGURATION

Kind Tips

1. Please remove the phone case for better effect.
2. Clean the lenses and main camera with the cleaning cloth to avoid blurry images caused by dirt.
3. Note for iPhone users (iOS 15.1 or higher):

Please follow the instructions below, otherwise the main camera of the phone will always switch automatically

1. Turn on the camera macro control switch.
2. When taking a photo, if the macro icon is on the screen, tap it to turn it off.
3. After turning off the “Macro Mode” , you can still take pictures.

Important Note
If you have a phone with more than one camera, please follow the step-by-step instructions below.

STEP ONE
Launch the camera on your Apple or Android phone.

STEP TWO
“Use your finger to cover the back phone camera one by one The MAIN CAMERA is the one that is blurry and dark when covered by the finger.”

STEP THREE
Attach the lens clip

1. Adjust the clip ring to center it on the main camera
2. Tighten the screw on the clip

STEP FOUR
Install the lens

IMPORTANT NOTE:
Make sure to keep your phone’s zoom level at 1x magnification, when using Selvim lenses.

How to use the tripod

1. Install the universal phone clip to the tripod stand.
2. Put the phone on the phone clip, then attach the lens clip and install the lens.
3. Adjust to a suitable shooting angle with the left hand, and tighten the screw with the right hand to fix it.

Note for using telephoto

Reminder:
Rotate the focus wheel to focus, do not touch the phone screen to avoid switching the main camera.

Make sure to keep your phone’s zoom level at 1x magnification If you use the built-in super macro or wide-angle (0.5x) functions, the main camera will change. When this happens, your screen will suddenly turn black.

Note for using the macro lens

Keep 1-2 inch from the target when taking pictures with the macro lens

How To Use The Eye Cup

Just installing the eyecup on the telephoto lens and rotate the focus wheel left and right to focus.

NOTE: The observed object is at least 3 meters from you.

Solution for the telephoto lens not attaching to the clip

1. Reason: The ring on the eyecup is left on the lens.
2. Remove the ring.
3. Put the ring back on the eyecup.
   The telephoto lens can then be mounted on the clip normally.

FAQs

Why does the screen appear blurry when I use the macro lens?

This is normal.The macro lens is designed for super, close-up photography.Once you position the macro lens within 1-2 inches (2.5-5cm) of your subject, you'll start to see your subject come into focus.

I have iPhone 13 (or 14), why the main camera keeps changing?

Please refer to Kind tips: note for iPhone users

Why can't I focus when using the telephoto lens?

Please rotate the focus wheel on the lens left and right until the screen image is clear. (Recommended distance: shooting objects 3 meters away)

Why is it unstable when using the tripod.
Please pull out the tripod extension part, it will help stabilize.

Customer Service
24/7 Customer Service Email: support@selvim.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>