Brita TU-34260 Insulated Filtered Water Bottle with Straw User Manual
- June 16, 2024
- BRITA
Table of Contents
Brita TU-34260 Insulated Filtered Water Bottle with Straw
Product Information
- Specifications
- Material: Stainless Steel
- Capacity: Varies (check product label for specific capacity)
- Filter Type: Premium Filter
- Dishwasher Safe: No (hand-wash only)
Product Usage Instructions
- Step 1: Inserting the Filter
- Remove the lid from the bottle.
- Take the filter and insert it into the bottle.
- Press the filter until it is flush with the straw.
- Step 2: Locking the Lid and Straw
- Align the lid and straw with their respective openings on the bottle.
- Twist the lid clockwise to lock it in place.
- Step 3: Filling the Bottle
- Fill the bottle with cold water.
- Ensure that the water level does not exceed the Max Fill line indicated on the bottle.
- Note: The above steps apply to both Stainless Steel and Hard-Sided Plastic Premium Filtering Water Bottles.
- FAQ
- How often should I change my filter?
- We recommend changing the filter every [insert recommended time, e.g., 2 months] or after [insert number of uses, e.g., 100 refills]. This ensures optimal filtering performance and maintains the quality of the water.
- How do I clean the Stainless Steel Premium Filtering Water Bottle?
- To clean the Stainless Steel Premium Filtering Water Bottle, follow these steps:
- Remove the filter from the bottle.
- Hand-wash the bottle with mild dish soap, using a sponge or soft cloth.
- Rinse the bottle thoroughly to remove any soap residue.
- Never use abrasive detergents or put the bottle in a dishwasher, as it may damage the stainless steel material.
- How do I clean the Hard-Sided Plastic Premium Filtering Water Bottle?
- The Hard-Sided Plastic Premium Filtering Water Bottle is dishwasher safe (top rack only). Follow these steps:
- Remove the filter from the bottle.
- Place all plastic components, including the bottle and lid, in the top rack of the dishwasher.
- Run the dishwasher using a mild dish soap.
- If you prefer to hand-wash, follow the same steps as for the Stainless Steel Premium Filtering Water Bottle.
FAQS
How do I prepare and change the filter in my Brita® Premium Filtering Water Bottle?
1. Rinse your Brita® Bottle Filter under a strong stream of water for 15 seconds. Be sure to direct the water through all sides of the filter, including the inside, so it washes out any loose carbon particles (first-time use only). 2. Insert the filter and press until flush with the straw. 3. Align the lid and straw. Twist right to lock. 4. Fill with cold water to the Max Fill line.
How often should I change my filter?
Replace your Brita® Bottle Filter every 40 gallons, or about every 2 months, for optimal performance.
How do I clean my Brita® Premium Filtering Water Bottle?
Our Stainless Steel Premium Filtering Water Bottles should be washed by hand. Remove the filter, and then hand-wash with mild dish soap and rinse well. (Never use abrasive detergents or a dishwasher.) Our Hard-Sided Plastic Premium Filtering Water Bottles are dishwasher safe (top rack only). Remove the filter and place all plastic components, including the bottle and lid, in the top rack. If you prefer to hand-wash, use mild dish soap and rinse well.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>