Reboot RBM2100D Recommended Weld Settings Instruction Manual
- June 16, 2024
- Reboot
Table of Contents
Reboot RBM2100D Recommended Weld Settings
Product Information
Specifications
- Weld Process : Steel & Stainless Steel (DCEN)
- Electrode Types : Steel E6013, Steel E7018/E7024
- Wire Types : Steel Self Shielded E71T-11, Steel MIG C100 ER70S-6, Stainless Steel ER308L/ER316L, Aluminum Ar100 ER4043, Aluminum Ar100 ER5356
- Electrode Diameters : 1/16 1.6mm, 3/32 2.4mm, 3/32 2.5mm, 1/8 3.2mm, 0.024 0.6mm, 0.035 0.9mm, 0.039 1.0mm
- Wire Diameters : 0.030 0.8mm, 0.035 0.9mm, 0.039 1.0mm, 0.6 mm 24 ga .024 in, 0.8 mm 22 ga .030 in, 0.9 mm 20 ga .036 in, 1.2 mm 18 ga .048 in, 1.5 mm 16 ga .060 in, 1.9 mm 14 ga .075 in, 2.7 mm 12 ga .105 in, 3.2 mm 1/8 .125 in, 4.8 mm 3/16 .187 in, 6.4 mm 1/4 .250 in, 7.9 mm 5/16 .312 in
Product Usage Instructions
Step 1: Selecting the Weld Process
Depending on the type of material you are welding, choose the appropriate
weld process. For steel and stainless steel, use the DCEN process. For
aluminum, use the Ar100 ER4043 or Ar100 ER5356 process. For stick welding, use
the Stick Lift TIG Aviation Connector 4P 1,2 process.
Step 2: Choosing the Electrode Type and Diameter
Based on the weld process selected, choose the appropriate electrode type
and diameter. For steel and stainless steel (DCEN), use Steel E6013 or Steel
E7018/E7024 electrodes. For aluminum (Ar100 ER4043 or Ar100 ER5356), use the
corresponding electrodes. Refer to the table for the electrode diameters
available.
Step 3: Selecting the Wire Type and Diameter
If using the MIG process, choose the appropriate wire type and diameter.
For steel (Steel MIG C100 ER70S-6), use the ER70S-6 wire. For stainless steel
(Stainless Steel ER308L/ER316L), use the corresponding wire. For aluminum
(Ar100 ER4043 or Ar100 ER5356), use the corresponding wire. Refer to the table
for the wire diameters available.
Step 4: Adjusting Settings
Use the knobs provided to adjust the settings for voltage, wire feed speed,
and amps depending on the process and desired results. Refer to the table for
recommended settings.
Frequently Asked Questions (FAQ)
-
Q: What is the recommended weld process for steel?
A: The recommended weld process for steel is DCEN. -
Q: What electrode types should I use for steel?
A: For steel, you can use either Steel E6013 or Steel E7018/E7024 electrodes. -
Q: What wire types should I use for steel?
A: For steel, you can use Steel Self Shielded E71T-11 or Steel MIG C100 ER70S-6 wire. -
Q: What wire types should I use for stainless steel?
A: For stainless steel, you can use Stainless Steel ER308L/ER316L wire. -
Q: What wire types should I use for aluminum?
A: For aluminum, you can use either Ar100 ER4043 or Ar100 ER5356 wire. -
Q: How do I adjust the voltage, wire feed speed, and amps?
A: Use the knobs provided on the product to adjust the voltage, wire feed speed, and amps. Refer to the table for recommended settings.
Reboot RBM2100D Recommended Weld Settings
WELD PROCESS| ELECTRODE TYPE| ELECTRODE DIA
| |
| Steel & Stainless Steel (DCEN)| 1/16″
1.6mm
3/32″
2.4mm
| Steel E6013 (DCEP)| 3/32″
2.5mm
| 1/8″
3.2mm
Steel E7018/E7024 (DCEP)| 3/32”
2.5mm
1/8“
3.2mm
WELD PROCESS| WIRE TYPE| WIRE DIA
| Steel Self Shielded E71T-11 (DCEN)| 0.030”
0.8mm
0.035”
0.9mm
| 0.039”
1.0mm
| Steel MIG C100 ER70S-6 (DCEP)| 0.024”
0.6mm
| 0.030”
0.8mm
| 0.039”
1.0mm
Steel MIG C100 ER70S-6 (DCEP)| 0.024”
0.6mm
0.030”
0.8mm
| 0.039”
1.0mm
| Stainless Steel ER308L/ER316L (DCEP)| 0.030”
0.8mm
0.039”
1.0mm
| Aluminum Ar100
ER4043(DCEP)
| 0.030”
0.8mm
Aluminum Ar100
ER5356(DCEP)
| 0.030”
0.8mm
Replacement Parts
- Gas nozzle 12mm 14-15AK
- Ceramic nozzle 12mm 14-15AK
- Contact tip /Ф0.6,0.8,0.9,1.0mm/M6 X 25
- torch head
- Gas diffuser 15AK
- Nozzle spring 15AK
A
V/ OOV/ OO
- Please contact us as follows for additional services：
- Facebook ： VIPWELD
- Whatsapp : +86 18938887689
- Email : nancy@weldvip