Tenbaba ‎TBB-Carplay-02 5 Inch Wireless Touchscreen Interface Stereo User Manual

Tenbaba ‎TBB-Carplay-02 5 Inch Wireless Touchscreen Interface Stereo

Attention

1. Check all accessories before installation, NO return after installation, but there is a possibility for repairing or discounted returns.
2. Please do not use a high-pressure water gun to flush the host and the cameras, the product is only waterproof against the rain.
3. Please do not use alcohol, stain removal solution and other corrosive solvents to wipe the host and lens to avoid damaging the appearance of the product and waterproofness.
4. Please make sure to connect all the units before turning on the power.
5. Do not fold the cable lines during installation.

Please read this manual carefully before use and keep it for future reference

Explanation of Main Components

• Host

• Power Line

• Hood

• Glass-Fiber Reinforced Nylon Bracket

Accessories Details

1. zip ties *6
2. Glass-fiber Bracket for host*1
3. Bracket Anti-Vibration 0-Ring + Screws*3
4. Hexagon Screwdriver*1
5. o-ring*3 (size:22mm/25.4mm/ 28mm)
6. screwdriver*1

Description of main parts and key functions

Connection Method

1. Put the multimeter on DC, the black test connects to the negative battery pole, the red test connects to the test line
2. When the ACC is OFF, there should be no output, the multimeter shows nothing; when the ACC is ON, the multimeter should show 12V voltage, at this time has found the ACC power line.
3. lf you haven’t found the ACC line, please use the red pen to replace the test line repeatedly (the black pen connected to the negative pole remains unchanged) until you find the ACC line.

Description of the main menu screen

• Carplay: connect to CarPlay
• Android Auto: Connect to Android Auto
• BT: Connect to cellphone
• Volume: Host Volume adjustment
• Brightness: Adjust the screen brightness
• Settings: Host Menu settings

CarPlay & Android auto connection instructions

1. Tap the corresponding or connect to the screen casting according to the usage requirements.

Note:
For the first connection, turn on the cell phone Bluetooth, connect to the host Bluetooth, then wait for 5-10 seconds, entry the cell phone pop-up window to use CarPlay, the Bluetooth will be automatically disconnected after authentication, cell phone CarPlay interface will automatically transmit. The next boot automatically connect, as long as the host’s Bluetooth Wi-Fi is on, there is no any operation needed.

Apple carplay

Note:
For the first connection, turn on the cell phone Bluetooth, connect to the host Bluetooth, then wait for 5-10 seconds, when the cell phone Wi-Fi is in the open state, the Android auto interface will automatically transmit. Click the home button to return to the main interface of the dash cam.

Android auto

Main Settings screen description

Click to entry the maim setting screen, as follows:

1. Screen saver: Set the auto-lock time of the screen
2. Language: Multiple languages
3. Time setting: Set the host time (after connecting to GPS/Wi-Fi/Bluetooth, the host will update the time automatically)
4. Phone audio: ON/OFF, when switch to OFF the mobile phone sound plays by the host.
5. Key Volume: ON/OFF the touch key tone.
6. Reset factory: Reset the host
7. Version: Check the version/Bluetooth name/Wi-Fi name and password

Main features

Common Troubleshooting Solutions

1. How to disconnect CarPlay or Android auto?
   Answer: Just turn off the WiFi or forget the Bluetooth device.

2. How do I reconnect to the Car play/Android auto after manually disconnecting it?
   Answer: Just reconnect to the dash cam through Bluetooth.

3. How do I reconnect to Car play/Android auto after restart the dash cam.
   Answer: It will be connected back automatically when Bluetooth and WiFi are both enabled .

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>