Panasonic AWUE150WP 4K Integrated Camera Instruction Manual
- June 16, 2024
- Panasonic
Table of Contents
- AWUE150WP 4K Integrated Camera
- Product Information
- Specifications
- Product Usage Instructions
- 1. Safety Precautions
- 2. FCC Notice (USA)
- 3. Notification (Canada)
- FAQ
- Q: Can I remove the panel covers?
- Q: Can I install the unit in a confined space?
- Q: Can I use accessories other than the recommended ones?
- Q: How often should I check the installation?
- Q: Can I move the unit while the tripod is attached?
AWUE150WP 4K Integrated Camera
Product Information
Specifications
- Model No. AWUE150WP
- Model No. AWUE150KP
- Model No. AWUE150WE
- Model No. AWUE150KE
Product Usage Instructions
1. Safety Precautions
Before operating the 4K Integrated Camera, please take note of
the following safety precautions:
-
Always keep the main unit mounting screw, bracket mounting
screws, and drop-prevention wire mounting screw out of the reach of
infants and small children. -
Do not remove panel covers by unscrewing. To reduce the risk of
electric shock, do not remove the covers. No user serviceable parts
inside. Refer servicing to qualified service personnel. -
In order to maintain adequate ventilation, do not install or
place this unit in a bookcase, built-in cabinet, or any other
confined space. To prevent the risk of electric shock or fire
hazard due to overheating, ensure that curtains and any other
materials do not obstruct the ventilation. -
To reduce the risk of fire or electric shock and annoying
interference, use the recommended accessories only. -
Check the installation at least once a year. An improper
installation could cause the unit to fall off, resulting in
personal injury. -
Do not pick up and move the unit while the tripod is attached.
The fitting may break under the weight of the tripod, which may
result in injury.
2. FCC Notice (USA)
Model Number: AW-UE150WP/AW-UE150KP
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102
Support contact: 1-800-524-1448
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
To assure continued FCC emission limit compliance, follow the
attached installation instructions and the user must use only
shielded interface cables when connecting to a host computer or
peripheral devices. Also, any unauthorized changes or modifications
to this equipment could void the user’s authority to operate this
device.
3. Notification (Canada)
CAN ICES-003 (A)/NMB-003(A)
This equipment is compliant with Class A of CISPR 32. In a
residential environment, this equipment may cause radio
interference.
FAQ
Q: Can I remove the panel covers?
A: No, do not remove the panel covers as it may result in
electric shock. There are no user-serviceable parts inside. Please
refer servicing to qualified service personnel.
Q: Can I install the unit in a confined space?
A: No, in order to maintain adequate ventilation and prevent the
risk of electric shock or fire hazard due to overheating, do not
install or place this unit in a bookcase, built-in cabinet, or any
other confined space. Ensure that curtains and any other materials
do not obstruct the ventilation.
Q: Can I use accessories other than the recommended ones?
A: To reduce the risk of fire or electric shock and avoid
annoying interference, it is recommended to use only the
accessories recommended by the manufacturer.
Q: How often should I check the installation?
A: It is advisable to check the installation at least once a
year to ensure proper mounting. An improper installation could
cause the unit to fall off, resulting in personal injury.
Q: Can I move the unit while the tripod is attached?
A: No, do not pick up and move the unit while the tripod is
attached. The fitting may break under the weight of the tripod,
which may result in injury.
Operating Instructions
4K Integrated Camera
Model No. AWUE150WP Model No. AWUE150KP Model No. AWUE150WE Model No.
AWUE150KE
Before operating this product, please read the instructions carefully and save this manual for future use. Please carefully read the “Read this first!” (pages 2 to 5) of this Manual before use.
PJ EJ W1118YM6032 -FJ
ENGLISH
DVQP1812TA
Read this first! (For AWUE150WP, AWUE150KP)
WARNING:
· To reduce the risk of fire or electric shock, do not expose this equipment
to rain or moisture.
· To reduce the risk of fire or electric shock, keep this equipment away from
all liquids. Use and store only in locations which are not exposed to the risk
of dripping or splashing liquids, and do not place any liquid containers on
top of the equipment.
WARNING:
Always keep the main unit mounting screw, bracket mounting screws and drop-
prevention wire mounting screw out of the reach of infants and small children.
CAUTION:
Do not remove panel covers by unscrewing. To reduce the risk of electric
shock, do not remove the covers. No user serviceable parts inside. Refer
servicing to qualified service personnel.
indicates safety information.
CAUTION:
In order to maintain adequate ventilation, do not install or place this unit
in a bookcase, built-in cabinet or any other confined space. To prevent risk
of electric shock or fire hazard due to overheating, ensure that curtains and
any other materials do not obstruct the ventilation.
CAUTION:
To reduce the risk of fire or electric shock and annoying interference, use
the recommended accessories only.
CAUTION:
Check the installation at least once a year. An improper installation could
cause the unit to fall off resulting in personal injury.
CAUTION:
Do not pick up and move the unit while the tripod is attached. The fitting may
break under the weight of the tripod, which may result in injury.
FCC NOTICE (USA) Supplier’s Declaration of Conformity
Model Number: AW-UE150WP/AW-UE150KP Trade Name: Panasonic Responsible Party:
Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102
Support contact: 1-800-524-1448
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION:
This equipment has been tested and found to comply with the limits for a class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached
installation instructions and the user must use only shielded interface cables
when connecting to host computer or peripheral devices. Also, any unauthorized
changes or modifications to this equipment could void the user’s authority to
operate this device.
NOTIFICATION (Canada)
CAN ICES-003 (A)/NMB-003(A)
indicates safety information.
2
Read this first! (For AWUE150WE, AWUE150KE)
WARNING:
· To reduce the risk of fire or electric shock, do not expose this equipment
to rain or moisture.
· To reduce the risk of fire or electric shock, keep this equipment away from
all liquids. Use and store only in locations which are not exposed to the risk
of dripping or splashing liquids, and do not place any liquid containers on
top of the equipment.
WARNING:
Always keep the main unit mounting screw, bracket mounting screws and drop-
prevention wire mounting screw out of the reach of infants and small children.
WARNING:
This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
CAUTION:
Do not remove panel covers by unscrewing. To reduce the risk of electric
shock, do not remove the covers. No user serviceable parts inside. Refer
servicing to qualified service personnel.
indicates safety information.
Turkey Only AEEE Yönetmeliine Uygundur. AEEE Complies with Directive of
Turkey.
CAUTION:
In order to maintain adequate ventilation, do not install or place this unit
in a bookcase, built-in cabinet or any other confined space. To prevent risk
of electric shock or fire hazard due to overheating, ensure that curtains and
any other materials do not obstruct the ventilation.
CAUTION:
To reduce the risk of fire or electric shock and annoying interference, use
the recommended accessories only.
CAUTION:
Check the installation at least once a year. An improper installation could
cause the unit to fall off resulting in personal injury.
CAUTION:
Do not pick up and move the unit while the tripod is attached. The fitting may
break under the weight of the tripod, which may result in injury.
3
Read this first! (For AWUE150WE, AWUE150KE) (continued)
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS
1. Pre-requisite conditions to achieving compliance with the above standards
Read this first! (For AWUE150WE, AWUE150KE) (continued)
Disposal of Old Equipment Only for European Union and countries with recycling
systems This symbol on the products, packaging, and/or accompanying documents
means that used electrical and electronic products must not be mixed with
general household waste. For proper treatment, recovery and recycling of old
products, please take them to applicable collection points in accordance with
your national legislation. By disposing of them correctly, you will help to
save valuable resources and prevent any potential negative effects on human
health and the environment. For more information about collection and
recycling, please contact your local municipality, dealer or supplier.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
: : :
Panasonic Connect Co., Ltd. Fukuoka, Japan Japan/China
., . /
: :
” ”
. , . 30, . 03022,
:
7
, . : X X XXXXXXX
: (7 2017, 8 2018,…0 2020) : , … L
Manufactured by: Panasonic Connect Co., Ltd. 4-1-62 Minoshima, Hakata-ku,
Fukuoka 812-8531, Japan Importer: Panasonic Connect Europe GmbH Authorized
Representative in EU: Panasonic Testing Centre Winsbergring 15, 22525 Hamburg,
Germany
Importer for UK: Panasonic Connect UK, a branch of Panasonic Connect Europe
GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT
5
Read this first!
Note on grounding
· Ground the unit via the
Ground connector
to ground connector on wall outlet, ground bar, etc.
Trademarks and registered trademarks · Microsoft®, Windows®, Windows® 7,
Windows® 10, Microsoft Edge, Internet Explorer®, ActiveX® and DirectX® are
either registered trademarks or trademarks of Microsoft Corporation in the
United States and other countries. · Apple, Mac, macOS, OS X, iPhone, iPad,
and Safari are registered trademarks of Apple Inc., in the United States and
other countries. · AndroidTM and ChromeTM browser are trademarks of Google
LLC. · Intel® and Intel® CoreTM are trademarks or registered trademarks of
Intel Corporation in the United States and other countries. · Adobe® and
Reader® are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries. · The terms HDMI and
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries. · NDI® is a registered trademark of NewTek, Inc. ·
Other names of companies and products contained in these Operating
Instructions may be trademarks or registered trademarks of their respective
owners.
About copyright and licence
Distributing, copying, disassembling, reverse compiling, reverse engineering,
and also exporting in violation of export laws of the software provided with
this unit are expressly prohibited.
Abbreviations
The following abbreviations are used in this manual. · Microsoft® Windows® 7
Professional SP1 32/64-bit is abbreviated
to “Windows 7”. · Windows® Internet Explorer® 11 32/64-bit is abbreviated to
“Internet Explorer”.
For the purposes of this manual, the model numbers of the units are given as listed in the table below.
Model number of unit
AW-UE150WP AW-UE150KP AW-UE150WE AW-UE150KE AW-RP150G
Model number given in manual
AWUE150
AWRP150
Illustrations and screen displays featured
in the manual
· What is shown in the manual’s illustrations and screen displays
may differ from how it is actually appears.
· Functions which can be used by Windows Internet Explorer 11
only are indicated using the
mark.
· The screenshots are used in accordance with the guidelines of
Microsoft Corporation.
6
Contents
Read this first! (For AWUE150WP, AWUE150KP) ………………………. 2
Read this first! (For AWUE150WE, AWUE150KE) ………………………. 3
Read this first! ………………………………………………………………………….. 6 Note on grounding
……………………………………………………………………. 6
Before use …………………………………………………………………………………. 8 Overview
…………………………………………………………………………………. 8 Computer requirements
…………………………………………………………….. 8 Disclaimer of warranty ………………………………………………………………. 9
Network security ………………………………………………………………………. 9
Features…………………………………………………………………………………… 10
Accessories …………………………………………………………………………….. 11
Optional accessories ……………………………………………………………….. 11
Operating precautions ……………………………………………………………… 12
Wireless remote control (optional accessory)……………………………. 14
Parts and their functions ………………………………………………………….. 15 Camera unit
…………………………………………………………………………… 15 Wireless remote control: AW-RM50G (optional
accessory)…………… 25
Setting the remote control IDs ………………………………………………….. 27
Network settings………………………………………………………………………. 28 Using Easy IP Setup Software
to make settings for the unit………….. 28 Using EasyIP Setup Tool Plus to make
settings for the unit………….. 28 Setting the initial account
…………………………………………………………. 29 Installing the plug-in viewer software
…………………………………………. 29
Basic shooting operations ……………………………………………………….. 30
How to turn the power on and off ……………………………………………… 31 Turning the power on
………………………………………………………………. 31 Turning the power off ……………………………………………………………….
31
Selecting the units……………………………………………………………………. 32
Selecting the shooting modes (scene files)……………………………….. 33 Types of shooting
modes…………………………………………………………. 33 How to select the shooting
mode………………………………………………. 33
Shooting ………………………………………………………………………………….. 34
What to do when encountering problems in the basic shooting operations
……………………………………………………………………………. 35
More advanced operations ……………………………………………………….. 36
Manual shooting ………………………………………………………………………. 37 Manually adjusting the
focus…………………………………………………….. 37 Manually adjusting the
iris………………………………………………………… 37 Manually adjusting the shutter speed
………………………………………… 37 Manually adjusting the gain ……………………………………………………… 37
Preset memories………………………………………………………………………. 38
White balance adjustment ………………………………………………………… 39 Automatic adjustment (AWB:
AWB A or AWB B) ………………………… 39 Auto tracking white adjustment
(ATW)……………………………………….. 40 3200K and 5600K presets ……………………………………………………….. 40
VAR………………………………………………………………………………………. 40
Black balance adjustment ………………………………………………………… 41 Automatic adjustment
……………………………………………………………… 41
Black level (master pedestal) adjustment ………………………………….. 42
Genlock adjustment …………………………………………………………………. 43 Horizontal phase adjustment
……………………………………………………. 43
Basic setup operations …………………………………………………………….. 44 When performing the
operations using the wireless remote control ………………………………………………………………………………..
44
Camera menu items …………………………………………………………………. 45 Setting the camera menu items
………………………………………………… 45 Top Menu screen ……………………………………………………………………. 45 Camera
screen ………………………………………………………………………. 46 Brightness 1/2 screen
……………………………………………………………… 46 Brightness 2/2 screen ……………………………………………………………… 47
Picture 1/8 screen …………………………………………………………………… 48 Color TEMP. Setting screen
…………………………………………………….. 49 Picture 2/8 screen …………………………………………………………………… 50
Picture 3/8 screen …………………………………………………………………… 50 Picture 4/8 screen
…………………………………………………………………… 51 Picture 5/8 screen …………………………………………………………………… 51
Picture 6/8 screen …………………………………………………………………… 52 Picture 7/8 screen
…………………………………………………………………… 53 Picture 8/8 screen …………………………………………………………………… 54
Matrix 1/5 screen ……………………………………………………………………. 54 Matrix 2/5 screen
……………………………………………………………………. 55 Matrix 3/5 screen …………………………………………………………………….
55 Matrix 4/5 screen ……………………………………………………………………. 56 Matrix 5/5 screen
……………………………………………………………………. 56 Lens screen …………………………………………………………………………… 57
System 1/2 screen ………………………………………………………………….. 57 System 2/2 screen
………………………………………………………………….. 58 Output 1/9 screen …………………………………………………………………… 63
Output 2/9 screen …………………………………………………………………… 64 Output 3/9 screen
…………………………………………………………………… 65 Output 4/9 screen …………………………………………………………………… 66
Output 5/9 screen …………………………………………………………………… 67 Output 6/9 screen
…………………………………………………………………… 67 Output 7/9 screen …………………………………………………………………… 68
Output 8/9 screen …………………………………………………………………… 68 Output 9/9 screen
…………………………………………………………………… 69 Pan/Tilt screen ……………………………………………………………………….. 71
Preset 1/2 screen……………………………………………………………………. 72 Preset 2/2
screen……………………………………………………………………. 73 Maintenance
screen………………………………………………………………… 74 Firmware Version 1/2 screen
……………………………………………………. 74 Firmware Version 2/2 screen ……………………………………………………. 75
IP Network screen…………………………………………………………………… 75 Hour Meter screen
………………………………………………………………….. 76 HDMI Status screen………………………………………………………………… 77
Error Status screen …………………………………………………………………. 78
Camera menu item table …………………………………………………………… 79
Displaying the web screen ……………………………………………………….. 86 Displaying the web screen
using a personal computer…………………. 86 Switching between the Live screen [Live]
and Web setup screen [Setup] ………………………………………………………………………………. 88 Logging into
the Web screen ……………………………………………………. 88
Web screen operations …………………………………………………………….. 89 Live screen [Live]
……………………………………………………………………. 89
Web screen configurations ………………………………………………………. 94 Web setup screen
[Setup]………………………………………………………… 94 Setting status screen [Setting
status]…………………………………………. 95 Basic screen [Basic]………………………………………………………………… 96
Image screen [Image/Audio] …………………………………………………… 104 Collaboration capability
[Linkage] ……………………………………………. 127 User management screen [User mng.]
…………………………………….. 130 Network setup screen [Network] ……………………………………………… 132
Maintenance screen [Maintenance] …………………………………………. 148
Displaying the web screen using a personal computer equipped with a touch
panel ………………………………………………………………. 152
Displaying the web screen using a mobile terminal …………………. 154 Camera control
screen [Camera Control] …………………………………. 154
Limiters………………………………………………………………………………….. 156
Setting/releasing the limiters ………………………………………………….. 157 Basic limiter
operations………………………………………………………….. 157 Setting the limiters
………………………………………………………………… 157 Releasing the limiters……………………………………………………………..
157 Resetting the limiters …………………………………………………………….. 157
Safe mode ……………………………………………………………………………… 158 Concerning the safe
mode……………………………………………………… 158 Detection of equipment trouble
……………………………………………….. 158
Troubleshooting …………………………………………………………………….. 159
Specifications ………………………………………………………………………… 168
Index ……………………………………………………………………………………… 170
7
Before use
Overview
· This product is an all-in-one pan-tilt head remote camera that supports 4K
/12G-SDI and is also compatible with 4K/60p format.
· Equipped with an optical 20x zoom lens and 4K-compatible MOS sensor, it is
possible to record high-quality images with a high degree of realism with the
horizontal resolution of 2000 lines. With its high sensitivity and built-in
image-shake correction and nightmode functions, the unit can record in a wide
range of environments.
· This product is compatible with NDI|HX version 2 technology of NewTek, Inc.
· The unit supports transmission of video to NewTek NDI|HX compatible software
applications and hardware devices over a network.
· When a controller is connected, camera operations can be performed smoothly
via IP control or serial control.
· The unit features a night mode that exposes subjects to infrared rays,
making it possible to shoot even under low-light conditions.
· When the unit is connected to a personal computer via an IP network, it can
be operated via a web browser.
· With a variety of 4K interfaces, there are individual outputs for HD and
SDI, so the unit can be used flexibly in a wide range of situations as a 4K-
compatible remote camera.
· Connection with a Panasonic camera controller is also possible via
Panasonic’s proprietary serial communication format.
· The unit is available in white (AW-UE150WP/AW-UE150WE) or black (AW-UE150KP
/AW-UE150KE) to suit your intended application and environment.
Computer requirements
CPU
7th Generation Intel® CoreTM (Kaby Lake or later) recommended
Memory
For Windows: 4 GB or more
For Mac: 4 GB or more
Network function
100BASE-T/TX or 1000BASE-T, RJ-45 connector
Image display
Resolution: 1920 × 1080 pixels or more Color generation: True Color 24-bit or more
Supported operating systems and web browsers
For Windows: Microsoft® Windows® 7, 10 Windows® Internet Explorer® 11 64-bit/32-bit
Microsoft Edge Google Chrome
For Mac: macOS 10.13 Safari 11
macOS 10.12 Safari 11
OS X 10.11 Safari 11
Google Chrome
For iPhone, iPad: iOS Safari
For Android: Android OS Google Chrome
Other
Adobe® Reader® (for viewing the operating instructions available on the website)
8
Before use (continued)
IMPORTANT
· Failure to provide the required personal computer environment may slow down
the delineation of the images on the screen, make it impossible for the web
browser to work and cause other kinds of problems.
Network security
As the unit intended to be used while connected to a network, the following
security risks exist.
A Leakage or theft of information through the unit B Unauthorized operation of
the unit by persons with malicious intent C Interference with or stoppage of
the unit by persons with malicious
intent
It is your responsibility to take precautions, such as those described below,
to protect yourself against the above network security risks. Panasonic does
not accept any responsibility for damage of this type.
· Use the unit in a network secured by a firewall, etc. · If the unit is
connected to a network that includes personal computers,
make sure that the system is not infected by computer viruses or other
malicious programs (using a regularly updated antivirus program, antispyware
program, etc.). · Protect your network against unauthorized access by
restricting users to those who log in with an authorized user name and
password. · After accessing the unit as an administrator, be sure to close all
web browsers. · Change the administrator password periodically. · To avoid
passwords that can be guessed easily by third parties, set a password of at
least 8 characters in length, including at least 3 different types of
characters, such as upper case, lower case, numbers, and symbols. · Restrict
access to the unit by authenticating the users, for example, to prevent
setting information stored on the unit from leaking over the network. · Do not
install the unit in locations where the unit, cables, and other parts can be
easily damaged or destroyed by persons with malicious intent. · Avoid
connections that use public lines.
9
Features
Multiformat support
· You can switch between the following formats via the camera menus or a web
browser.
[4K format] 2160/59.94p, 2160/50p, 2160/29.97p1, 2160/25p1, 2160/24p1,
2160/23.98p1
[HD format] 1080/59.94p, 1080/50p, 1080/29.97p1, 1080/29.97PsF, 1080/25p1,
1080/25PsF, 1080/23.98p2, 1080/24p1, 1080/23.98p1, 1080/23.98PsF,
1080/59.94i, 1080/50i,
720/59.94p, 720/50p
1 Native output *2 OVER 59.94i output (your monitor may recognize the signal as
59.94i).
1type 4K MOS sensor and highperformance
20x zoom lens featured
· A newly developed 1-type 4K MOS sensor and DSP (digital signal processor)
are incorporated. High-quality pictures are obtained by video processing in
many different kinds of ways.
· In addition to its optical 20x zoom lens, the unit comes with a 10x digital
zoom to achieve high-quality images that overflow with ambiance.
· A dynamic range stretcher (DRS) function that compensates for overexposure
and loss of dark detail and a digital noise reduction (DNR) function for
minimizing image lag even in dark locations and shooting scenes clearly are
incorporated to reproduce clean and clear images in a wide range of
applications.
Easy operation of unit enabled by its
integration with a highperformance pantilt head unit
· Operations at the high speed of 60°/s · Wide rotational angles with a
panning range of ±175° and a tilting
range from 30° to 210° · Quiet operation with noise levels of NC35 · Storage
of up to 100 positions in the preset memory
(The number of preset memories that can be used varies from one controller to
another.)
Builtin night mode
· The unit supports infrared shooting. By exposing subjects to infrared rays,
shooting under ordinarily difficult low-light conditions is possible. (Image
output will be in black and white.)
· The iris will be fixed at open.
IP image output functions
· The unit is equipped with image compression and IP transmission LSI
capabilities. Output in 4K quality at up to 60 fps.
· Operation with IP control allows for a wide range of applications, such as
controlling the camera from remote locations.
High degree of compatibility with Panasonic’s
currently available controllers, enabling a flexible system to be put together
· A maximum of five units can be operated by serial control from one of
Panasonic’s currently available controllers (AW-RP150). The unit can also be
used together with the cameras and pan-tilt head unit systems currently
available from Panasonic Connect Co., Ltd. so that an existing system can be
used to advantage to put together a system that is even more flexible.
10
Accessories
Check that the following accessories are present and accounted for. · After removing the product from its container, dispose of the power cable cap (if supplied) and packing materials in an appropriate manner.
Mount bracket for installation surface (Hanging/Desktop) (1)
Main unit mounting screw (with flat washer, spring washer) M3×6 mm (1/4 inches) (1)
Dropprevention wire (1) Dropprevention wire mounting screw (1) (comes attached to the unit)
Bracket mounting screws (bind-head) M4×10 mm (13/32 inches) (4)
Optional accessories
zWireless remote control AW-RM50G (Size “AA” dry battery x 2, obtained
separately) zDirect ceiling mount bracket WV-Q105A zFiber module
11
Operating precautions
Do not use the unit in oilysmoky or dusty
places.
Performance may be adversely affected if small particles or other
foreign objects get inside the product.
Take extra care in environments where a special effect such as
theatrical smoke is used.
Shoot under the proper lighting conditions.
To produce pictures with eye-pleasing colors, shoot under the
proper lighting conditions.
The pictures may not appear with their proper colors when shooting
under fluorescent lights. Select the proper lighting as required.
To ensure a stable performance in the long
term
Using the unit for prolonged periods in locations where the temperature and
humidity levels are high will cause its parts to deteriorate, resulting in a
reduction of its service life. (Recommended temperature: Max. 35 °C (95 °F))
Ensure that a cooling unit or heating unit will not blow any air directly
toward the installation location.
Do not point the camera at
strong lights.
When parts of the MOS sensor are
exposed to spotlights or other strong
lights, blooming (a phenomenon where
the edges of strong lights become
blurred) may occur.
Bright subject
Blooming
What happens with high-brightness subjects
Flare may occur if an extremely bright light source is pointed at the lens. In
a case like this, change the angle or take some other remedial action.
When using the automatic functions
· In the [Scene] such as the camera menu, the initial settings on some items
has been set to auto, making it impossible for these items to be operated
manually. To operate them manually, switch from the auto settings to the
manual settings as required.
· When using the ATW (auto tracking white adjustment) function under
fluorescent lights, the white balance may vary.
· In some situations, it may be hard to focus at the auto setting. In cases
like this, select the manual setting, and focus manually.
Zooming and focusing
When the focus is set manually, out-of-focusing may occur during zooming.
After zooming, if necessary, either adjust the focus or set the focus to auto.
When using the focus at the manual setting, proceed with zooming after setting
the focus position at the Tele end where the focusing accuracy is higher.
(However, if the distance from the unit to the subject is less than 1.5 meters
(4.92 ft), the subject may shift out of focus at the Wide end.) If zooming is
performed to the Tele end after having adjusted the focus at the Wide end,
out-of-focusing may occur.
Operation of the lens when the power is turned
on
When the unit’s power is turned on, the zoom, focus and iris are adjusted
automatically.
The unit comes with the safe mode.
The safe mode is function designed to protect the unit from damage. For
details, refer to “Concerning the safe mode” ( page 158).
Operating temperature range
Avoid using the unit in cold locations where the temperature drops below 0 °C
(32 °F) or hot locations where the temperature rises above 40 °C (104 °F)
since these temperatures downgrade the picture quality and adversely affect
the internal parts.
Concerning the MONI OUT signal
It is anticipated that MONI OUT is used in applications such as for outputting
images to be cropped from 4K to HD and for monitoring images.
Concerning the HDMI interface standard
This unit has been certified as HDMI-compatible, but on rare occasions images
may not be displayed depending on the HDMI device which has been connected to
the unit.
Color bars
Color bars are used to adjust the color phase, and the widths and positions of
these bars may differ from other models.
H.264/H.265 patent pool licensing
This product is licensed based on the AVC Patent Portfolio License, and the
license does not extend beyond uses by users, who engage in the acts described
below, for their own personal and non-profit applications. (i) Recording of
image information in compliance with the AVC
standard (hereafter, “AVC videos”) (ii) Playing of AVC videos recorded by
consumers engaging
in personal activities or AVC videos acquired from licensed providers For
details, visit MPEG LA, LLC website (http://www.mpegla.com).
Concerning PoE++ power supply
The unit complies with the IEEE 802.3bt. Use a compatible Ethernet hub and
PoE++ injector to use a PoE++ power supply. Software authentication (LLDP)
complies with IEEE P802.3bt, but it may be necessary to make settings on the
network device. For details on Ethernet hubs and PoE++ injectors for which
operations have been verified, consult your local dealer.
Turn off the power before connecting or
disconnecting the cables.
This unit is not equipped with a power switch. Turn off the DC 12 V power
supply or PoE++ power supply device before connecting or disconnecting cables.
Handle the unit carefully.
Do not drop the unit or subject it to strong impact or vibration. Failure to
obey may cause the unit to malfunction.
When the unit is not in use
Turn off the unit’s power when it is not in use. When the unit is no longer to
be used, make sure to remove the camera and mount bracket rather than leaving
them in place.
12
Operating precautions (continued)
Do not touch the optical system parts.
The optical system parts are vital to the operation of the camera. Under no
circumstances must they be touched. In the unlikely event that they have
become dusty, remove the dust by using a camera blower or by wiping them
gently with a lens cleaning paper.
Do not point the camera directly at the sun or a
laser beam no matter whether it is turned on or not.
Taking images of the sun, laser beams, or other brightly lit subjects for
prolonged periods of time may damage the CCD.
Personal computer used
If the same image is displayed for a prolonged period on a personal computer’s
monitor, the monitor may be damaged. Use of a screen saver is recommended.
Concerning the IP address setting
Do not run the Easy IP Setup Software on a multiple number of personal
computers for a single camera and set the IP address at the same time.
Otherwise, you will be unable to complete the proper procedure and set the IP
address correctly.
Do not allow foreign matter to make contact
with the rotating parts.
Failure to obey may cause the unit to malfunction.
Do not get close to the moving parts of the
camera head.
Do not put your fingers or body close to the unit while it is in operation.
Doing so may result in injury or cause the unit to malfunction. Furthermore,
if the unit hits a person or obstacle, during the panning or tilting
operation, the unit will enter into the safe mode. For details, refer to the
page 158.
Keep the unit away from water.
Avoid all direct contact with water. Failure to obey may cause the unit to
malfunction.
Maintenance
Turn off the unit’s power before proceeding with maintenance. Failure to obey
may result in injuries. Wipe the surfaces using a soft dry cloth. Avoid all
contact with benzine, paint thinners and other volatile substances, and avoid
using these substances. Otherwise, the casing may become discolored.
Do not turn the camera head by hand.
Turning the camera head by hand may cause the unit to malfunction.
Use the unit in an environment with minimal
moisture and dust.
Avoid using the unit in an environment with high concentration of moisture or
dust since these conditions will damage the internal parts.
About the lens/pan-tilt head
If the lens, pan-tilt head, and other parts are not operated for a long period
of time, the viscosity of the grease applied inside them may increase and
operation may become no longer possible. Move the lens and pan/tilt head
regularly.
About consumables
The following parts are consumables. Replace them using the lifespans as a
guide. The lifespans may vary depending on the operating environment and
operating conditions. The lifespans are a guide for when the unit is used at
35 °C (95 °F). · Cooling fan: Approx. 15000 hours
Contact your dealer regarding replacements.
Disposal of the unit
When the unit has reached the end of its service life and is to be disposed
of, ask a qualified contractor to dispose of the unit properly in order to
protect the environment.
Information on software used with this product
This product includes GNU General Public License (GPL) and GNU Lesser General
Public License (LGPL) licensed software, and the customer is entitled to
obtain, modify, or redistribute the source code for the software. This product
includes MIT Licensed software. This product includes BSD Licensed software.
For details on obtaining the source codes, visit the following website.
https://panasonic.biz/cns/sav/ However, do not contact Panasonic for questions
regarding obtained source codes.
13
Wireless remote control (optional accessory)
This unit can be operated by remote control using a wireless remote control
(model number: AW-RM50G) purchased separately. Check out the following points
before using the wireless remote control.
zPoint the wireless remote control at the unit’s wireless remote control
signal lightsensing area (front panel or back panel), and operate it within a
range of 10 meters (32.8 ft) from these areas.
zRefer to
zThe signal sensing distance is reduced if the angle at which the wireless
remote control signals are sensed is increased. The light-sensing sensitivity
is reduced to about one-half when the wireless remote control is pointed at an
angle of 40 degrees from each position in front of a wireless remote control
signal light-sensing area (front panel or back panel). If the remote control
is operated from the behind the unit, it may be either difficult or impossible
to perform the desired operations.
zIf the unit is installed near fluorescent lights, plasma monitors or other
such products or if the unit is exposed to sunlight, the effects of the light
may make it impossible for the unit to be operated using the wireless remote
control. Be sure to follow the steps below for installation and use. · Take
steps to ensure that the wireless remote control signal lightsensing area will
not be exposed to the light from fluorescent lights, plasma monitors or other
such products or from the sun. · Install the unit away from fluorescent
lights, plasma monitors and other such products.
zFor about 10 minutes even after the batteries have been removed from the
wireless remote control, the selection of the operation to be performed (the
Wireless remote control signal light sensing area (back panel, 1 place)
Wireless remote control signal light sensing area (front panel, 2 places)
· Top view
Approx. 45° Approx. 45°
· Rear panel view
14
Parts and their functions
Camera unit
1
5 2 3
4 5 6
7 8
Rear panel
9
10
LAN LINK ACT
RS-422
12 V IN IR ID AUDIO IN
11 12 13 14
SERVICE
3G SDI OUT G/L IN
OPTICAL MONI OUT 12G SDI OUT
15 16 18 19 17
Bottom panel
20 21 22
1. Mount bracket for installation surface (supplied accessory)
Mount this bracket onto the installation surface, and then attach the camera
main unit to the bracket.
2. Dropprevention wire
This wire is screwed down to the bottom panel of the camera main
unit. Loop the circle part of the wire around the hook of the mount
bracket.
3. Status display lamp
This lights in the following way depending on the status of the unit.
Orange Light up When the standby status is established
Blink twice
When a signal not matched by the remote control ID has been received from the wireless remote control (optional accessory) while the power is on
Green Light up When the power is on
Blink twice
When a signal matched by the remote control ID has been received from the wireless remote control (optional accessory) while the power is on
Blinking rapidly
When the initialization process is complete
Red
Light up
When trouble has occurred in the unit
Blinking slowly
Firmware being updated
Blinking rapidly
When a PoE++ software authentication error has occurred
4. Tilt head
This rotates in the right and left direction.
5. Wireless remote control signal lightsensing area
The light-sensing area is provided in three places, on the front panel of the
camera pedestal and at the top of the rear panel.
6. Hole for securing the camera pedestal
This hole is provided in the bottom panel of the camera pedestal.
7. Camera head
This rotates in the up and down direction.
8. Tally lamp
This comes on or goes off in response to the control from the controller but
only when “On” has been selected as the tally lamp use setting. The tally lamp
is red or green.
9. LAN connector for IP control <LAN LINK/ACT>
This LAN connector (RJ-45) is connected when exercising IP control over the
unit from an external device. Use a LAN cable (category 5e or better, maximum
100 m (328 ft)) for connection.
6
23
15
Parts and their functions (continued)
10.RS422 connector
This RS-422 connector (RJ-45) is connected when exercising serial control over
the unit from an external device. Use a cable with the following
specifications for the connection to this connector. Furthermore, by shorting
the R-TALLY signal (2-pin) with the GND (1-pin), it is possible to light the
tally lamp (red) in the camera head section of the unit.
and green tally signals received by the unit. Output is by contact output, and
normally is “OPEN”, then it becomes “MAKE” for output. ( page 68)
LAN cable1 (category 5e or above, straight cable),
max. 1000 m (3280 ft)
1 Use of an STP (shielded twisted pair) cable is recommended.
Pin No.
Signal
1 GND
2 R_TALLY_IN
3 RXD
4 TXD
Pin No.
Signal
5 TXD+
6 RXD+
7 OPTION_OUT1
8 OPTION_OUT2
Example OPTION_OUT1, OPTION_OUT2 connector connections
AW-UE150
Voltage: Maximum DC12 V Current: Maximum 100 mA
OPTION_OUT1 OPTION_OUT2
GND
11.Service switches
Perform switch settings before turning the unit on.
LAN LINK ACT
RS-422
12 V IN IR ID AUDIO IN
SERVICE
3G SDI OUT G/L IN
OPTICAL MONI OUT 12G SDI OUT
Service switches
SW1
SW2 SW3 SW4
Function Switches for initialization (Refer to the explanations in
“Initialization 1” and “Initialization 2”)
Always leave at OFF (used for factory adjustments)
Factory settings
OFF
OFF OFF OFF
Initialization 1 · Reset the user authentication settings and host
authentication
settings for network connection. (This will delete all the registered user
information (IDs/passwords) and host information (IP addresses).) · With the
IR ID switches and service switches set as shown below, turn on the power of
the unit.
SW1 SW2 SW3 SW4
ON
OFF
Initialization 2 · The unit is reset to the state it was in at the time of
purchase. (All
camera menu setting values and network setting values are reset.) · With the
IR ID switches and service switches set as shown below,
turn on the power of the unit.
SW1 SW2 SW3 SW4
ON
OFF
16
Parts and their functions (continued)
14.G/L IN connector <G/L IN>
This is the external sync signal input connector. This unit supports BBS
(Black Burst Sync) and tri-level synchronization. Supply to this connector the
signals that correspond to the video signal format which has been set.
Frequency: 59.94 Hz, 29.97 Hz
Format
2160/59.94p
2160/29.97p 1080/59.94p
1080/59.94i 1080/29.97p 1080/29.97PsF 1080/23.98p over 59.94i 720/59.94p
External sync signal input format
Trilevel sync
BBS
1080/59.94p 720/59.94p
1080/29.97p 1080/59.94i 1080/29.97PsF
480/59.94i
1080/59.94p 720/59.94p
1080/59.94p 720/59.94p
Frequency: 50 Hz, 25 Hz
Format
2160/50p
2160/25p 1080/50p
1080/50i 1080/25p 1080/25PsF 720/50p
External sync signal input format
Trilevel sync
BBS
1080/50p 720/50p
1080/25p 1080/50i 1080/25PsF
576/50i
1080/50p 720/50p
1080/50p 720/50p
Frequency: 24 Hz
Format 2160/24p 1080/24p
External sync signal input format Trilevel sync
1080/24p 1080/24PsF
Frequency: 23.98 Hz
Format
2160/23.98p 1080/23.98p 1080/23.98PsF
External sync signal input format Trilevel sync
1080/23.98p 1080/23.98PsF
15.DC IN connector <12 V IN> (XLR connector)
Input 12 V DC.
For 12 V input: Max. 3 m (9.84 ft) (when using an AWG16 cable)
External DC power supply Connect after making sure that the output voltage of
the external DC power supply is compatible with the rated voltage of the
camera. Select an output amperage for the external DC power supply with a
margin above the total amperage of the connected devices. The total amperage
of connected devices can be calculated with the following formula.
Total power consumption ÷ voltage When the power of the camera is turned on,
inrush current is generated. Insufficient power supply when turning on the
power may cause a malfunction. We recommend that you use an external DC power
supply that can assure double the capacity of the total power consumption of
the camera and connected devices that are turned on by interlock when the
power of the camera is turned on (such as lenses, wireless microphone
receivers).
· Make sure of the pin alignment of the DC output terminal of the external DC power supply and the camera DC IN connector, and connect the polarity correctly. If the +12 V power supply is mistakenly connected to the GND terminal, it may cause fire or malfunction.
1
4
2
3
12 V IN 1 GND 2 — 3 — 4 +12 V
HA16RA-4P (77) Hirose Electric Co.
16.IR ID switches
CAM1
CAM2
CAM3
CAM4
These are used to select the ID of the wireless remote control (optional
accessory). ( page 27) The IR ID switch settings “CAM1” to “CAM4” correspond
to the
17.Ground connector
Connects to the ground connector on a wall outlet, ground bar, etc. for
grounding. ( page 6)
18.AUDIO IN connector
17
Parts and their functions (continued)
Output conditions for each video format
Frequency
System Format 2160/59.94p
HDMI
2160/59.94p
1080/59.94p*1
2160/29.97p
2160/29.97p 1080/29.97p
59.94Hz
1080/59.94p
1080/59.94i 1080/29.97p 1080/29.97PsF 1080/23.98p over 59.94i 720/59.94p
2160/50p
2160/25p
1080/59.94p
1080/59.94i 1080/29.97p 1080/29.97p 1080/23.98p over 59.94p 720/59.94p
2160/50p
1080/50p*2
2160/25p 1080/25p
50Hz
1080/50p
1080/50p
24Hz
1080/50i 1080/25p 1080/25PsF 720/50p
2160/24p
1080/24p
1080/50i 1080/25p 1080/25p 720/50p 2160/24p 1080/24p 1080/24p
23.98Hz
2160/23.98p
1080/23.98p 1080/23.98PsF
2160/23.98p 1080/23.98p
1080/23.98p 1080/23.98p
1 When [UHD Crop] is [Crop(720)], output is 720/59.94p. 2 When [UHD Crop] is [Crop(720)], output is 720/50p.
12G SDI OUT 2160/59.94p
1080/59.94p1
2160/29.97p 1080/29.97p 1080/29.97PsF
1080/59.94p
1080/59.94i 1080/29.97p 1080/29.97PsF 1080/23.98p over 59.94i 720/59.94p
2160/50p
1080/50p2
2160/25p 1080/25p 1080/25PsF
1080/50p
1080/50i 1080/25p 1080/25PsF 720/50p 2160/24p 1080/24p 1080/24p 2160/23.98p
1080/23.98p 1080/23.98PsF 1080/23.98p 1080/23.98PsF
OPTICAL 2160/59.94p
1080/59.94p1
2160/29.97p 1080/29.97p 1080/29.97PsF
1080/59.94p
1080/59.94i 1080/29.97p 1080/29.97PsF 1080/23.98p over 59.94i 720/59.94p
2160/50p
1080/50p2
2160/25p 1080/25p 1080/25PsF
1080/50p
1080/50i 1080/25p 1080/25PsF 720/50p 2160/24p 1080/24p 1080/24p 2160/23.98p
1080/23.98p 1080/23.98PsF 1080/23.98p 1080/23.98PsF
3G SDI OUT
1080/59.94p1 1080/59.94i1
1080/29.97p 1080/29.97PsF
1080/59.94p 1080/59.94i 1080/59.94i 1080/29.97p 1080/29.97PsF 1080/23.98p over
59.94i 720/59.94p
1080/50p2 1080/50i2
1080/25p 1080/25PsF
1080/50p 1080/50i 1080/50i 1080/25p 1080/25PsF 720/50p
1080/24p
1080/24p
1080/23.98p 1080/23.98PsF
1080/23.98p 1080/23.98PsF
MONI OUT
1080/59.94i1
1080/29.97p 1080/29.97PsF
1080/59.94i
1080/59.94i 1080/29.97p 1080/29.97PsF 1080/23.98p over 59.94i 720/59.94p
1080/50i2
1080/25p 1080/25PsF
1080/50i
1080/50i 1080/25p 1080/25PsF 720/50p
1080/24p
1080/24p
1080/23.98p 1080/23.98PsF
1080/23.98p 1080/23.98PsF
18
Parts and their functions (continued)
IP video transmission output (multichannel display)
· When “Streaming mode” is set to “H.265”
Settings Resolution
H.265(1) 1920×1080 1280×720
H.265(2) 1920×1080 1280×720 640×360
H.264(1) —
60fps
60fps
System
30fps
30fps
frequency
—
59.94Hz
50fps
50fps
System
25fps
25fps
frequency
—
50Hz
Frame rate
System
30fps
30fps
frequency
—
29.97Hz
System
25fps
25fps
frequency
—
25Hz
System
24fps
24fps
frequency
—
24/23.98Hz
H.264(2) — —
— — — —
H.264(3) — —
— — — —
H.264(4) —
JPEG(1) 1920×1080 1280×720 640×360 320×180
JPEG(2)
640×360 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
24fps
24fps
12fps
12fps
—
4fps
4fps
1fps
1fps
· The H.265 transmission mode (Transmission priority) cannot be selected. · When the system frequency is 24/23.98Hz, the resolution for H.265(1) and H.265(2) is limited to 1920×1080. · You cannot make settings above the resolution and frame rate set by the system format.
· When “Streaming mode” is set to “H.265(UHD)”
Settings
H.265(1) H.265(2) 3840×2160
Resolution
—
System
30fps
frequency
—
59.94Hz
System
25fps
frequency
—
50Hz
System
30fps
Frame rate
frequency
—
29.97Hz
System
25fps
frequency
—
25Hz
System
24fps
frequency
—
24/23.98Hz
H.264(1) — — — — — —
H.264(2) — — — — — —
H.264(3) — — — — — —
H.264(4) JPEG(1) JPEG(2)
1920×1080
—
1280×720
640×360 640×360
320×180 320×180
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
24fps
24fps
12fps
12fps
—
4fps
4fps
1fps
1fps
· The H.265(UHD) transmission mode (Transmission priority) cannot be selected.
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 30fps 15fps 5fps 1fps 25fps
12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
19
Parts and their functions (continued)
· When “Streaming mode” is set to “H.264”
Settings
H.265(1)
Resolution
—
System
frequency
—
59.94Hz
System
frequency
—
50Hz
Frame rate
System
frequency
—
29.97Hz
System
frequency
—
25Hz
System
frequency
—
24/23.98Hz
H.265(2) — —
— — — —
H.264(1) 1920×1080 1280×720
60fps 30fps 15fps 5fps
H.264(2) 1920×1080 1280×720 640×360 320×180
60fps 30fps 15fps 5fps
H.264(3)
1280×720 640×360 320×180
30fps 15fps 5fps
50fps 25fps 12.5fps 5fps
50fps 25fps 12.5fps 5fps
25fps 12.5fps
5fps
30fps 15fps 5fps
30fps 15fps 5fps
30fps 15fps 5fps
25fps 12.5fps
5fps
25fps 12.5fps
5fps
25fps 12.5fps
5fps
24fps
24fps
—
H.264(4)
1280×720 640×360 320×180
JPEG(1) 1920×1080 1280×720 640×360 320×180
30fps 15fps 5fps
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps
30fps 15fps 5fps
25fps 12.5fps
5fps
—
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
JPEG(2)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
· The available options for the H.264 transmission mode (Transmission priority) are limited to 30fps or lower (excluding 24fps). · When the system frequency is 24/23.98Hz, the resolution for H.264(1) and H.264(2) is limited to 1920×1080. · You cannot make settings above the resolution and frame rate set by the system format.
· When “Streaming mode” is set to “H.264(UHD)”
Settings
H.265(1) H.265(2)
H.264(1) 3840×2160
H.264(2)
Resolution
—
—
—
System
frequency
—
59.94Hz
System
frequency
—
50Hz
Frame rate
System
frequency
—
29.97Hz
System
frequency
—
25Hz
System
frequency
—
24/23.98Hz
60fps
30fps
—
—
50fps
25fps
—
—
30fps
—
—
25fps
—
—
24fps
—
—
H.264(3) — — — — — —
H.264(4) JPEG(1) JPEG(2)
1920×1080
—
1280×720
640×360 640×360
320×180 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
24fps
24fps
12fps
12fps
—
4fps
4fps
1fps
1fps
· The H.264(UHD) transmission mode (Transmission priority) cannot be selected.
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
20
Parts and their functions (continued)
· When “Streaming mode” is set to “JPEG (UHD)”
Settings
H.265(1) H.265(2)
Resolution
—
—
System
frequency
—
—
59.94Hz
System
frequency
—
—
50Hz
Frame rate
System
frequency
—
—
29.97Hz
System
frequency
—
—
25Hz
System
frequency
—
—
24/23.98Hz
H.264(1) H.264(2) H.264(3)
1920×1080 1280×720
60fps 30fps 15fps 5fps
1920×1080 1280×720 640×360 320×180
60fps 30fps 15fps 5fps
1280×720 640×360 320×180
30fps 15fps 5fps
50fps 25fps 12.5fps 5fps
50fps 25fps 12.5fps 5fps
25fps 12.5fps
5fps
30fps 15fps 5fps
30fps 15fps 5fps
30fps 15fps 5fps
25fps 12.5fps
5fps
25fps 12.5fps
5fps
25fps 12.5fps
5fps
24fps
24fps
—
H.264(4) JPEG(1) 3840×2160
1280×720 640×360 320×180
30fps
15fps
5fps
5fps
1fps
25fps
12.5fps
5fps
5fps
1fps
30fps
15fps
5fps
5fps
1fps
25fps
12.5fps
5fps
5fps
1fps
—
4fps
1fps
JPEG(2) — — — — — —
· The available options for the H.264 transmission mode (Transmission priority) are limited to 30fps or lower (excluding 24fps). · When the system frequency is 24/23.98Hz, the resolution for H.264(1) and H.264(2) is limited to 1920×1080.
· When “Streaming mode” is set to “RTMP”
Settings
H.265(1)
Resolution
—
System
frequency
—
59.94Hz
System
frequency
—
50Hz
Frame rate
System
frequency
—
29.97Hz
System
frequency
—
25Hz
System
frequency
—
24/23.98Hz
H.265(2) —
H.264(1) 1920×1080 1280×720
H.264(2) —
60fps
30fps
—
15fps
—
5fps
50fps
25fps
—
12.5fps
—
5fps
30fps
—
15fps
—
5fps
25fps
12.5fps
—
5fps
—
24fps
—
—
H.264(3) — —
— — — —
H.264(4) —
JPEG(1) 1920×1080 1280×720 640×360 320×180
JPEG(2)
640×360 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
24fps
24fps
12fps
12fps
—
4fps
4fps
1fps
1fps
· The RTMP transmission mode (Transmission priority) cannot be selected. · When the system frequency is 24/23.98Hz, the resolution for H.264(1) and H.264(2) is limited to 1920×1080. · You cannot make settings above the resolution and frame rate set by the system format.
JPEG(3)
—
—
—
—
—
—
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 30fps 15fps 5fps 1fps 25fps
12.5fps 5fps 1fps 24fps 12fps 4fps 1fps
21
Parts and their functions (continued)
· When “Streaming mode” is set to “SRT(H.265)”
Settings Resolution
H.265(1) 1920×1080 1280×720
H.265(2) —
60fps
System
30fps
frequency
—
59.94Hz
50fps
System
25fps
frequency
—
50Hz
Frame rate
System
30fps
frequency
—
29.97Hz
System
25fps
frequency
—
25Hz
System
frequency
—
—
24/23.98Hz
H.264(1) — —
— — — —
H.264(2) — —
— — — —
H.264(3) — —
— — — —
H.264(4) —
JPEG(1) 1920×1080 1280×720 640×360 320×180
JPEG(2)
640×360 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
—
—
—
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps
—
· The SRT(H.265) transmission mode (Transmission priority) cannot be selected. · It is not possible to select SRT(H.265) mode when the system frequency is 24/23.98Hz. · You cannot make settings above the resolution and frame rate set by the system format.
· When “Streaming mode” is set to “SRT(H.265 UHD)”
Settings
H.265(1) H.265(2) 3840×2160
Resolution
—
System
30fps
frequency
—
59.94Hz
System
25fps
frequency
—
50Hz
30fps
System
Frame rate
frequency
—
29.97Hz
System
25fps
frequency
—
25Hz
System
frequency
—
—
24/23.98Hz
H.264(1) — — — — — —
H.264(2) — — — — — —
H.264(3) — — — — — —
H.264(4) JPEG(1) JPEG(2)
1920×1080
—
1280×720
640×360 640×360
320×180 320×180
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
—
—
—
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps 30fps 15fps 5fps 1fps 25fps
12.5fps 5fps 1fps
—
· The SRT(H.265 UHD) transmission mode (Transmission priority) cannot be selected. · It is not possible to select SRT(H.265 UHD) mode when the system frequency is 24/23.98Hz.
22
Parts and their functions (continued)
· When “Streaming mode” is set to “SRT(H.264)”
Settings
H.265(1) H.265(2)
Resolution
—
—
H.264(1) 1920×1080 1280×720
H.264(2) —
System
frequency
—
59.94Hz
System
frequency
—
50Hz
Frame rate
System
frequency
—
29.97Hz
System
frequency
—
25Hz
System
frequency
—
24/23.98Hz
60fps
30fps
—
15fps
—
5fps
50fps
25fps
—
12.5fps
—
5fps
30fps
15fps
—
—
5fps
25fps
12.5fps
—
—
5fps
—
—
—
H.264(3) — —
— — — —
H.264(4) —
JPEG(1) 1920×1080 1280×720 640×360 320×180
JPEG(2)
640×360 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
—
—
—
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps
—
· The SRT(H.264) transmission mode (Transmission priority) cannot be selected. · It is not possible to select SRT(H.264) mode when the system frequency is 24/23.98Hz. · You cannot make settings above the resolution and frame rate set by the system format.
· When “Streaming mode” is set to “SRT(H.264 UHD)”
Settings
H.265(1) H.265(2)
H.264(1) 3840×2160
H.264(2)
Resolution
—
—
—
System
frequency
—
59.94Hz
System
frequency
—
50Hz
Frame rate
System
frequency
—
29.97Hz
System
frequency
—
25Hz
System
frequency
—
24/23.98Hz
60fps
30fps
—
—
50fps
25fps
—
—
30fps
—
—
25fps
—
—
—
—
—
H.264(3) — — — — — —
H.264(4) JPEG(1) JPEG(2)
1920×1080
—
1280×720
640×360 640×360
320×180 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
—
—
—
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps
—
· The SRT(H.264 UHD) transmission mode (Transmission priority) cannot be selected. · It is not possible to select SRT(H.264 UHD) mode when the system frequency is 24/23.98Hz.
23
Parts and their functions (continued)
· When “Streaming mode” is set to “NDI|HX V2”
Settings Resolution
NDI|HX 1920×1080 1280×720
System
frequency 59.94Hz
Frame rate
System
frequency 50Hz
System
frequency 29.97Hz
System
frequency 25Hz
60fps 30fps 15fps 5fps
50fps 25fps 12.5fps 5fps
30fps 15fps 5fps
25fps 12.5fps
5fps
JPEG(1)
1280×720 640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps
· It is not possible to select NDI|HX V2 mode when the system frequency is 24/23.98Hz. · The transmission mode (Transmission priority) cannot be selected. · You cannot make settings above the resolution and frame rate set by the system format.
· When “Streaming mode” is set to “MPEG2TS over UDP”
Settings Resolution
H.265(1) —
H.265(2) —
H.264(1) 1920×1080 1280×720
H.264(2) —
System
frequency
—
59.94Hz
System
frequency
—
50Hz
Frame rate
System
frequency
—
29.97Hz
System
frequency
—
25Hz
System
frequency
—
24/23.98Hz
60fps
30fps
—
15fps
—
5fps
50fps
25fps
—
12.5fps
—
5fps
30fps
15fps
—
—
5fps
25fps
12.5fps
—
—
5fps
—
—
—
H.264(3) — —
— — — —
H.264(4) —
JPEG(1) 1920×1080 1280×720 640×360 320×180
JPEG(2)
640×360 320×180
30fps
30fps
—
15fps
15fps
5fps
5fps
1fps
1fps
25fps
25fps
—
12.5fps
12.5fps
5fps
5fps
1fps
1fps
30fps
30fps
15fps
15fps
—
5fps
5fps
1fps
1fps
25fps
25fps
12.5fps
12.5fps
—
5fps
5fps
1fps
1fps
—
—
—
JPEG(3)
640×360 320×180
30fps 15fps 5fps 1fps
25fps 12.5fps
5fps 1fps 30fps 15fps 5fps 1fps 25fps 12.5fps 5fps 1fps
—
· The transmission mode (Transmission priority) cannot be selected. · It is not possible to select MPEG2-TS over UDP mode when the system frequency is 24/23.98Hz. · You cannot make settings above the resolution and frame rate set by the system format.
24
Parts and their functions (continued)
Wireless remote control: AWRM50G (optional accessory)
2
1
3
4
5
14
6
7
8
9
15
10
11
16
18
17
12
21
19
13
22
20
1. ON/STANDBY button <ON/STANDBY>
Each time this is pressed for 2 seconds, operation switches between turning on
the unit’s power and establishing the standby status.
2. Signal transmission window
3. MENU button