VOXON VX-PH001 Cup Holder Phone Mount User Manual
- June 16, 2024
- voxon
Table of Contents
Cup Phone Holder Model: VX-PH001
User Manual
VX-PH001 Cup Holder Phone Mount
Thank you for purchasing this VOXON Cup Phone Holder. Please read this User Manual thoroughly before using this product and retain it for future reference. If you have any problem using this Cup Phone Holder, please contact us by email at [email protected]
Package Contents
Product Overview
1. Universal Head on Base
2. Universal Head on Air Vent Clip
3. Lock Nut
4. Extendable Fixing Blocks
5. Control Knob on Base| 6. Control Knob on Air Vent Clip
7. Push Button
8. Phone Clamps
9. Silicon Caps
10. Universal Head Socket
---|---
Specifications
- Height of the Base: 14.5 in
- Diameter of the Base: 2.7-3.8 in (max. 4 inches with Silicon Caps）
- Width of Phone Clamps: 2.08-3.74 in
- Applicable Phone Size: 4-7 inches
- Max. Load Weight of Phone Mount: 17.6 oz
How to Use
To Install the Phone Holder Base
- Unscrew the Lock Nut from the back of the Phone Mount.
- Insert the Universal Head on Base into the Lock Nut.
- Snap the Universal Head on Base into the Universal Head Socket and tighten the Lock Nut.
- Put the Phone Holder Base into the car cup holder. Twist the Control Knob on Base clockwise to lock the base in the cup holder. If the base is too small to fix, put the silicone caps over the Extendable Fixing Blocks to increase the diameter.
- Use the Push Button to release the Phone Clamps to a suitable width.
- Put your phone on the Phone Mount, and tighten the clamps on both sides to fix the phone.
To Install the Air Vent Clip
- Unscrew the Lock Nut from the back of the Phone Mount.
- Insert the Universal Head on Air Vent Clip into the Lock Nut.
- Snap the Universal Head on Air Vent Clip into the Universal Head Socket. Tighten the Lock Nut to 80%.
- Insert the Air Vent Clip into the car air vent. Twist the Control Knob to fix it on the air vent (twist clockwise to tighten the clip, counterclockwise to loosen the clip).
- Use the Push Button to release the Phone Clamps to a suitable width.
- Put your phone on the Phone Mount, and tighten the clamps on both sides to fix the phone.
- Hold the Control Knob on Air Vent Clip with one hand, adjust the angle of the phone with the other, then fully tighten the Lock Nut.
FAQs
What should I do if the Phone Holder Base is not large enough?
Put the silicone caps over the Extendable Fixing Blocks to increase the diameter up to 4 inches.
What should I do if the Phone Holder wobbles?
Make sure the Lock Nut/the Base/the Air Vent Clip are securely tightened or locked. If all the structures are proper fixed, slight wobble of the holder will be acceptable.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact. This product should not be mixed with
other commercial wastes for disposal.
Limited 12-Month warranty
What this warranty covers.
VOXON LIMITED (Manufacturer) warrants to the original purchaser of this VOXON
product that the product shall be free of defects in design, assembly,
material, or workmanship.
What the period of coverage is.
VOXON LIMITED warrants the VOXON product for 12 Months.
What will we do to correct problems?
VOXON LIMITED will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the VOXON product is not provided to
VOXON LIMITED for inspection upon VOXON LIMITED’s request at the sole expense
of the purchaser, or if VOXON LIMITED determines that the VOXON product has
been improperly installed, altered in any way, or tampered with. The VOXON
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit VOXON website or email
[email protected] for more information. To
extend the warranty period, please visit VOXON website and register your VOXON
products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.