VOXON VX-WA804 Window or Door Alarm User Manual
- June 14, 2024
- voxon
Table of Contents
VOXON VX-WA804 Window or Door Alarm
Thank you for purchasing VOXON Window or Door Alarm. Please read this User Manual thoroughly before use of the product and retain it for future reference. If you have any problem using this product, please contact us by email at [email protected].
Product Information
Specifications
- Model: VX-WA802 / VX-WA804
- Power Source: Four LR44 coin cell batteries (included)
Product Overview
The VOXON Window or Door Alarm is a security device designed to protect
windows and doors from unauthorized entry. It consists of an alarm unit, a
magnet, and a mounting plate.
Package Contents
- Window or Door Alarm x 1
- Magnet x 1
- Mounting Plate x 1
- User Manual x 1
- LR44 Coin Cell Batteries x 4
Warning
IMPORTANT SAFETY INSTRUCTIONS – CAREFULLY FOLLOW THESE INSTRUCTIONS.
- RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories, and device.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from the fire to avoid an explosion.
- For proper insertion, please observe polarity indicators (+/-).
- Do not place the product in or near an inflammable, explosive, or hazardous object.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
- Do not place the product in or near water, rain, excess moisture, or extreme heat.
Installing the Alarm
- Locate a position on the window or door to be protected that allows easy access to the Off/Chime/Alarm switch. Make sure the switch is in the OFF position. Make sure the surface for mounting is clean and dry.
- Remove the protective covering from one side of the double-sided tape and then apply it to the mounting plate (on the back of the alarm). Remove the other protective covering from the double-sided tape. Stick the alarm on the door frame.
- Mount the magnet to the door or window using the double-sided tape. Align the arrows on both the alarm and the magnet. Make sure that when the door or window is closed, the gap between the two pieces of the alarm system is less than 2 cm/0.78 in.
- Once the correct placement is established, apply pressure to secure the double-sided tape.
Changing Batteries
- Detach the battery cover by removing the screw. Remove the drained batteries.
- Insert four new coin cell batteries in the correct polarities.
- Replace the battery compartment cover and secure it with the screw.
Activating Batteries
Remove the battery insulator to activate the batteries installed before
using the alarm.
How to Use
To activate the alarm, switch the Off/Chime/Alarm switch to the Alarm
position. To set the alarm to chime mode, switch the Off/Chime/Alarm switch to
the Chime position. To turn off the alarm or chime, switch the Off/Chime/Alarm
switch to the Off position.
FAQ
-
Q: How do I test the alarm volume?
A: To test the alarm, you may use a cloth to cover it and lower the volume. -
Q: What type of batteries does the alarm require?
A: The alarm requires four LR44 coin cell batteries, which are included in the package. -
Q: What should I do if the alarm gets damaged?
A: If the alarm gets damaged, do not operate it and contact our support team for assistance. -
Q: Can I use the alarm near water or in extreme heat?
A: No, it is not recommended to place the alarm in or near water, rain, excess moisture, or extreme heat. -
Q: How do I change the batteries?
A: To change the batteries, detach the battery cover by removing the screw, remove the drained batteries, insert four new coin cell batteries in the correct polarities, and then replace and secure the battery compartment cover with the screw. -
Q: Can children play with the alarm?
A: No, children should be supervised to ensure that they do not play with the alarm. -
Q: How do I activate the batteries?
A: Remove the battery insulator to activate the batteries installed before using the alarm. -
Q: What should I do if I have any problems with the product?
A: If you have any problems using this product, please contact us by email at [email protected].
Package Contents
Product Overview
- Off/Chime/Alarm Switch
- Mounting Plate
- Battery Compartment
- Magnet
Activating Batteries
Remove the battery insulator to activate the batteries installed before
using the alarm.
Installing the Alarm
The magnet must be placed next to the arrow on the alarm. Align the arrows on
both the alarm and the magnet.
- Locate a position on the window or door to be protected that allows easy access to the Off/Chime/Alarm switch. Make sure the switch is in the OFF position. Make sure the surface for mounting is clean and dry.
- Remove the protective covering from one side of the double-sided tape and then apply it to the mounting plate (on the back of the alarm). Remove the other protective covering from the double-sided tape. Stick the alarm on the door frame.
- Mount the magnet to the door or window using the double-sided tape. Align the arrows on both the alarm and the magnet. Make sure that when the door or window is closed, the gap between the two pieces of the alarm system is less than 2 cm/0.78 in.
- Once the correct placement is established, apply pressure to secure the double-sided tape.
How to Use
- To arm the unit, locate the Off/Chime/Alarm switch at the bottom of the alarm. Toggle the switch to the desired position. When in the Chime position, if the door/window is opened, the chime will sound. It will sound once again when the door or window is closed and opened again. When in the Alarm position, if the protected window/door is opened, causing the alarm to be separated from the magnet by more than 2cm, the alarm siren will sound continuously until disarmed or the door or window is closed.
- To disarm the alarm, toggle the switch to the Off position. Make sure the window, door or cabinet is closed before arming again.
NOTE: To test the alarm, you may use a cloth to cover it to lower the volume.
Changing Batteries
The alarm requires four LR44 coin cell batteries (included).
- Remove the alarm from the mounting plate.
- Detach the battery cover by removing the screw. Remove the drained batteries.
- Insert four new coin cell batteries in the correct polarities.
- Replace the battery compartment cover and secure it with the screw.
Warning
Risk of personal injury.
- Prolonged exposure to alarm sirens may cause permanent hearing loss.
- Batteries may leak harmful liquids or ignitable materials or explode, causing injury and product damage.
- Do not mix old and new or other battery types.
- Replace all batteries at a time.
- Replace fully discharged batteries immediately.
- For indoor use only.
- Do not use the product in wet locations.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS – CAREFULLY FOLLOW THESE INSTRUCTIONS.
- RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories, and device.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that do not play with the appliance.
- Keep the product away from the fire to avoid an explosion.
- For proper insertion, please observe polarity indicators (+/-).
- Do not place the product in or near an inflammable, explosive, or hazardous object.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
- Do not place the product in or near water, rain, excess moisture, or extreme heat.
Limited 12-Month Warranty
What this warranty covers.
VOXON LIMITED (Manufacturer) warrants to the original purchaser of this VOXON
product that the product shall be free of defects in design, assembly,
material, or workmanship.
What the period of coverage is.
VOXON LIMITED warrants the VOXON product for 12 Months.
What will we do to correct problems?
VOXON LIMITED will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the VOXON product is not provided to
VOXON LIMITED for inspection upon VOXON LIMITED’s request at the sole expense
of the purchaser, or if VOXON LIMITED determines that the VOXON product has
been improperly installed, altered in any way, or tampered with. The VOXON
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit the VOXON website or email
[email protected] for more information. To
extend the warranty period, please visit VOXON website and register your VOXON
products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment ) This Marking shown on the
product or its literature, indicates that it should not be disposed of with
other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of waste and recycle it responsibly to
promote the sustainable reuse of material resources. Household user should
contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contact. This product
should not be mixed with other commercial wastes for disposal.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, VOXON LIMITED declares that the product type VX-WA802 / VX-WA804
complies with Directive 2014/30/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.ivoxon.com