X-WIN 72 Standing Gaming Desk Installation Guide

X-WIN 72 Standing Gaming Desk

SCREW ACCESSORIES

PARTS ACCESSORIES

1. Connect two crossbars “A” with “P”.
2. Insert the motor axle “C”, rotate “C” to fix.
3. Insert the motor axle to “D”, roate it counterclockwise to lower the desk leg to the lowest height.
4. Disassemble “D”.
5. Install motor “E”.
6. Install “C” to another desk leg “L”.
7. The same, insert the motor axle to “D”, roate it clockwise to lower the desk leg to the lowest height.
8. Connect the two motors axle by using “D”.
9. Assembly the crossbar “A” with desk legs.
10. Install fixed iron plates “B”.
11. Fix crossbar “A” with screws.
12. Fix connector “D” with screws.
13. Assembly desk legs.
14. Assembly the pads.
15. Assembly desktop holders.
16. Connect the desktop.
17. Connect the desk frame and desktop.
18. Tighten the screws.
19. Assembly the controller.
20. Assembly the adapter.
21. Assembly the cup holder and headphone holder.
22. Assembly the LED lights.
23. Connect the controller with adapter.
24. Connect the controller with motor.
25. Fix the cable by using cable management.
26. Assembly cable management tray.

Monitor Riser Installation Method One-Side

1. Fix the cable managment tray with screws.
2. Place the cable hole cover and light strip controller.
3. Assembly “Y”.
4. Choose one of the following three installation methods based on personal needs.
5. Fix the monitor risers with screws.
6. Installing the baffle.
7. Connect the cable.

Monitor Riser Installation Method Two-Middle

1. Place the cable hole cover and light strip controller.
2. Assembly “Y”.
3. Connect the Monitor Riser.
4. Choose one of the following three installation methods based on personal needs.
5. Fix the monitor riser with screws.
6. Fix the cable managment tray with screws.
7. Installing the baffle.
8. Connect the cable.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>