Weijiejia 2BEBC MINI Stereo Music Headphone User Manual

Weijiejia 2BEBC MINI Stereo Music Headphone

Product Information

The device is compliant with part 15 of the FCC Rules, ensuring its operation meets the required standards. It has been designed to prevent harmful interference and accept any interference received, even if it may cause undesired operation. Please note that any changes or modifications not approved by the responsible party for compliance can void the user’s authority to operate the equipment.

Product Usage Instructions

1. Safety Precautions

Before using the device, please read and follow these safety precautions:

• Keep the device away from water and other liquids.
• Avoid using the device in extreme temperatures or humid environments.
• Do not expose the device to direct sunlight or excessive heat.
• Ensure proper ventilation to prevent overheating.
• Keep the device out of reach of children and pets.

2. Initial Setup

To set up the device for first-time use, please follow these steps:

1. Unpack the device and remove all packaging materials.
2. Place the device on a stable surface in a suitable location.
3. Connect the power cable to the device and plug it into a power outlet.
4. Press the power button to turn on the device.
5. Follow the on-screen instructions to complete the initial setup process.

3. Device Controls and Navigation

The device features several controls for easy navigation:

• Power Button: Press this button to turn the device on or off.
• Menu Button: Use this button to access the device’s menu options.
• Arrow Buttons: These buttons allow you to navigate through menu options and make selections.
• OK Button: Press this button to confirm selections or execute commands.

4. Troubleshooting

If you encounter any issues with the device, try the following troubleshooting steps:

1. Check that all cables are securely connected.
2. Ensure the device has sufficient power.
3. Restart the device by turning it off and on again.
4. Refer to the user manual for specific troubleshooting instructions.
5. If the problem persists, contact customer support for further assistance.

Specifications

• Compliance: Part 15 of FCC Rules
• Interference Handling: Accepts any interference received

Frequently Asked Questions (FAQ)

Q: What should I do if the device gets wet?

A: If the device comes into contact with water or any other liquid, immediately turn it off, disconnect the power source, and allow it to dry completely before attempting to use it again.

Q: Can I use the device in extremely cold temperatures?

A: It is not recommended to use the device in extreme temperatures as it may affect its performance. It is best to operate the device within the specified temperature range mentioned in the user manual.

Q: How can I contact customer support?

A: For any assistance or inquiries, please refer to the contact information provided in the user manual or visit our website for customer support details.

Safety guidelines

1. Do not disassemble or modify the device for any reason, otherwise the headset may malfunction or burn out.
2. Do not let the device come into contact with liquid, otherwise it will cause serious damage to the device.
3. Do not place the device in an environment where the temperature is too low or too high (below 0°C or above 45°C).
4. Do not use the device in thunderstorm weather Thunderstorms can cause the device to work abnormally and interrupt signals.
5. Do not use mobile power to charge, otherwise the earphone may malfunction or burn out.Do not use a charger above 1A for charging, otherwise the earphone may malfunction or burn out.

[The above 6 points of damage are not covered by the warranty, please know]|

product schematic

Start using

Press and hold the multifunction touch on the surface of the headset for up to 5 seconds  (see the product schematic for details) Until the indicator shows blue, red, lights flash alternately Then open the phone and search for [mini] connected device Press and hold the touch button for 5 seconds when you need to shut down Let go until the light flashes alternately blue, red, blue and red

How to pair

Function Operation instruction

Monaural specification

• Power on: Touch the power button for 3 seconds
• Shutdown: Touch the shutdown button for 5 seconds
• Volume plus: Touch the power button three times
• Next: Touch the power button twice
• Play/Pause: Touch the power button once
• Answer/Hang up: Touch the power button once
• Reject an incoming call: Touch the power button for 2 seconds
• Siri/ Voice Assistant: Touch the power button for 2 seconds

Binaural specification

• Power on: Touch the power button for 3 seconds
• Shutdown: Touch the shutdown button for 5 seconds
• Volume plus: Touch the right ear three times
• Volume reduction: Touch left ear three times in a row
• Next: Touch your right ear twice in a row
• Previous: Touch the left ear twice in succession
• Play/Pause: Touch the power button once
• Answer/Hang up: Touch the power button once
• Reject an incoming call: Touch the power button for 2 seconds
• Siri/ Voice Assistant: Touch the power button for 2 seconds
• Switching language: The phone is not connected when the device is powered on

Double-click the Power button (English and Chinese)

Single/binaural intelligent switching function

Single-ear use: Buy one, regardless of the left and right ears,
Can be worn

• Use both ears: Buy two, both manual boot at the same time

Hit any of the three before the phone is connected The headset was automatically paired, and the pairing was successful After that, only one headset flashes red alternately
Blue light.

• Unpair two ears: Disconnect the connection state three strokes

Unpair any headset ( connectin the case of mobile phones, you need to turn off Disconnect)

Light flashing indicator

• Startup state: red and blue lights alternately flash
• Shutdown status: The red light blinks three times
• Waiting for pairing: the red and blue lights flash alternately
• Matching success: Red and blue lights off
• Charging: The red light is always on
• Fully charged: Blue light is always on
• Boot search mode: the red and blue lights flash alternately

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF waming for Portable device: The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>