Xinzhigang JoySpark-T5 Bluetooth Headset Instruction Manual
- June 16, 2024
- Xinzhigang
Table of Contents
Xinzhigang JoySpark-T5 Bluetooth Headset
Product Information
Specifications
- Bluetooth Version : V5.2
- Supported Bluetooth Profiles: a2dp/avctp/avdtp/avrcp/hfp/spp/smp/att/gap/gatt/rfcomm/sdp/l2cap profile
- Working Frequency Band: 2.4G ISM band (2.402-2.480GHz)
- Battery Specification: Lithium battery 300mA/h
- Charging Time: 2.5 hours
- Overall Size: 18 16.5 7.5CM
- Overall Weight: Approximately 157g
Product Usage Instructions
Section 1: Bluetooth Headset Features
The Bluetooth headset MODEL JoySpark-T5 includes the following features
- Bluetooth status and charging status indicator lights
- Power button, playback pause button, call button
- Plus key (increase volume, switch to next track)
- Minus key (reduce volume, switch to previous track)
- dB volume switch button (94dB switches to 85dB)
- TYP-C charging port
- AUX sound source jack
- Call microphone
Section 2: Function Operation
Power On
To power on the earphones, press and hold the power button for two seconds.
The earphones will receive a POWER ON voice prompt and automatically enter
pairing mode. The red and blue lights will flash alternately, and the pairing
time will be 300 seconds. After the pairing timeout, the earphones will
automatically turn off, accompanied by a power off voice prompt.
Connect and Hang Up the Call
To connect the headphones, first ensure they are in pairing mode. Then, use
your phone to search for the headphones. Find the Bluetooth device name “B09”
on the phone interface and click on “connect”. The headphones will have a
voice prompt sound of “connect”. During a call, long press the power button
for onesecond to end the current call.
Reject Incoming Calls
To reject an incoming call, long press the power button for one second.
Answering a Phone Call
When receiving a phone call, click the power button to connect the call.
Volume Switching
To switch between different volume modes, press and hold the volume switch
button for 2 seconds.
Automatic Reconnection and Last Number Redial
The earphones will automatically initiate a reconnection to the last paired
phone each time they are turned on. To perform a last number redial, double
click the power button once during the standby mode.
Music Playback/Pause
To play or pause music, click the power button once. Repeat the operation to
pause.
Volume Up
To increase the volume, click the volume up button. The volume will increase
by one level, and there will be an English prompt sound when the volume
reaches its maximum.
Volume Down
To decrease the volume, click the volume down button.
Previous Song
To switch to the previous song, use the minus key (reduce volume, switch to
previous track).
Next Song
To switch to the next song, use the plus key (increase volume, switch to next
track).
IOS Power Display
The earphones support IOS power display.
Turn Off the Earphones
To turn off the earphones, perform a one to two function operation.
Manually Reconnect to a Phone
If needed, manually reconnect the earphones to a phone. At this time, the
Bluetooth earphones can be connected to both AB phones simultaneously,
achieving the function of using one Bluetooth earphone with two phones.
Section 3: LED Display Status
- Power On Pairing: Red and blue lights flashing alternately
- Shutdown: Red light remains on for one second and then goes off
- Connected Standby: Blue light flashes every 5 seconds
- Listening to Music During a Call: Blue light flashes every 5 seconds
- Charging Completion: The charging completion indicator light is off
- During Charging : The red light remains on during charging
- Low Voltage Alarm : Low voltage alarm with BatteryLow prompt sound
Section 5: Frequently Asked Questions (FAQ)
Q: How long does it take to charge the Bluetooth headset?
A: The charging time is approximately 2.5 hours.
Q: What is the battery specification of the Bluetooth headset?
A: The Bluetooth headset uses a Lithium battery with a capacity of 300mA/h.
Bluetooth Headset
MODEL ： JoySpark-T5
- Bluetooth status and charging status indicator lights
- Power button, playback pause button, call button
- Plus key (increase volume, switch to next track)
- Minus key (reduce volume, switch to previous track)
- dB volume switch button (94dB switches to 85dB)
- TYP-C charging port
- AUX sound source jack
- Call microphone
Section 2： Function
Function Name|
Operation Method and Status
---|---
Power on| Press and hold the power button for two seconds while turning on the
earphones and turning them off. The earphones will receive a “POWER ON” voice
prompt and automatically enter pairing mode. The red and blue lights will
flash alternately, and the pairing time will be 300 seconds. After pairing
timeout, the earphones will automatically turn off, accompanied by a “power
off” voice prompt
connect| After connecting the headphones and entering pairing mode, use your
phone to search for the headphones, find the Bluetooth device name on the
phone interface: “B09”, click on “connect”, and the headphones will have a
voice prompt sound of “connect”
---|---
Hang up the cal| During the call, long press the power button for one second
to end the current call
Reject incoming calls| Long press the power button for one second to reject
the current call
answering a phone| When answering a phone call, click the power button to
connect the current call
Volume switching| Press and hold the volume switch button for 2 seconds to
switch to another volume mode
Automatic reconnection upon
power on
| The earphones will automatically initiate a reconnection to the last paired
phone each time they are turned on
Last digit redial| Double click the power button once during the last redial
standby mode
Music playback/pause:| Click the power button once, repeat the operation to
pause
Volume up:| Click the volume up button to increase the volume by one level,
and there will be an English prompt sound when the volume reaches its maximum
volume down| Click the volume down button to decrease the volume by one level,
Previous song| Long press the volume down button for one second on the
previous song
Next song| Long press the volume up button for one second for the next song
IOS power display| support
Turn off the earphones.| Long press the power button for two seconds while
turning them on, and the earphones will receive a “POWER OFF” voice prompt
One to two function operation| The one to two function operation first pairs
and connects the Bluetooth earphones with A phone, and then turns off the
Bluetooth function of A phone. Then pair and connect the Bluetooth earphones
to the B phone, and turn on the Bluetooth function of the A phone. The
Bluetooth earphones will automatically reconnect to the A phone (the phone
needs to have automatic reconnection function) or directly click on the
Bluetooth
| earphones to manually reconnect to the A phone. At this time, the Bluetooth
earphones can be connected to both AB phones at the same time, achieving the
function of dragging two phones with one Bluetooth earphone
---|---
Section 3 : LED display status
| power on pairing wit h alternating | red and blue lights flashing |
|---|---|
| shutdown | red light remains on for one second and then goes off |
| Connected standby | blue light flashes every 5 seconds |
| Listening to music | the blue light flashes every 5 seconds |
| during a call | The blue light flashes every 5 seconds during a call |
| The charging completion | The charging completion n indicator light is off |
| during charging | The red light remains on during charging |
| Low voltage alarm | Low voltage alarm with “BatteryLow” prompt sound |
Section 4: charger and battery specification
- Rated charging voltage/current 5V/180 ± 15mA
- Charging time ≤ 2.5H
- Battery specification: Lithium battery 300mA/h
Section 5
-
Bluetooth version V5.2 support
a2dp/avctp/avdtp/avrcp/hfp/spp/smp/att/gap/gatt/rfcomm/sdp/l2cap profile -
Working frequency band 2.4G ISM band (2.402-2.480GHz)
-
Overall size earphones 18 16.5 7.5CM
-
The overall weight is approximately 157g
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment in to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>