W213 Complete Set Active Parking Assistant Parktronic

Product Information

Specifications

• Product Name: Complete Set Active Parking Assistant
  Parktronic

• Version: v1.0 (01.02.2023)

• Manufacturer: Kufatec GmbH & Co. KG

• Address: Dahlienstr. 15, 23795 Bad Segeberg

• Email: [email protected]

General Notes

The Complete Set Active Parking Assistant Parktronic is a
parking assistance system designed to help drivers park their
vehicles safely and accurately. This user manual provides detailed
instructions for installing and using the product.

Safety Instructions

Please read and follow the safety instructions below before
installing or using the product:

1. Ensure the vehicle’s engine is turned off and the ignition key
   is removed before starting the installation process.

2. Use caution when handling the components to avoid injury or
   damage.

3. Do not modify or alter any components of the system.

4. Consult a professional technician if you are unsure about any
   step of the installation process.

5. Keep the product away from water, moisture, and extreme
   temperatures.

Requirements for the Intended Use

In order to use the Complete Set Active Parking Assistant
Parktronic, the following requirements must be met:

• A compatible vehicle model and year as specified by the
  manufacturer.

• Basic knowledge of automotive electrical systems and
  wiring.

• The necessary tools for installation, including screwdrivers,
  pliers, and wire cutters.

• Adequate space and lighting for working on the vehicle.

Assembly Instructions

The following sections provide step-by-step instructions for
assembling the Complete Set Active Parking Assistant
Parktronic:

1. Disassembly of Front Bumper

Follow the instructions provided in section 10 of the manual to
disassemble the front bumper of your vehicle.

2. Disassembly of Engine Compartment Covering

Refer to section 11 of the manual for detailed instructions on
how to remove the covering of the engine compartment.

3. Disassembly of Front Driver’s Side Sill Trim

Section 12 of the manual provides step-by-step instructions on
how to disassemble the front driver’s side sill trim.

4. Disassembly of Center Console

Follow the instructions in section 13 of the manual to
disassemble the center console of your vehicle.

5. Disassembly of Main Unit

Refer to section 14 of the manual for detailed instructions on
how to disassemble the main unit.

6. Disassembly of Back Seat

Section 15 of the manual provides step-by-step instructions on
how to disassemble the back seat.

7. Disassembly of Rear Driver’s Side Covering

Follow the instructions in section 16 of the manual to
disassemble the covering on the rear driver’s side.

8. Disassembly of Rear Bumper

Refer to section 18 of the manual for detailed instructions on
how to disassemble the rear bumper of your vehicle.

9. Assembly of Rear Sensors

Section 19 of the manual provides step-by-step instructions on
how to assemble the rear sensors.

10. Assembly of Front Sensors

Follow the instructions in section 20 of the manual to assemble
the front sensors.

11. Assembly of Sensor Holders with Adhesive Pads

Refer to section 21 of the manual for detailed instructions on
how to assemble the sensor holders using the adhesive pads.

12. Assembly/Connection of Control Unit

Section 22 of the manual provides step-by-step instructions on
how to assemble and connect the control unit.

13. Cable Routing to the Rear

Follow the instructions in section 23 of the manual to route the
cables to the rear of the vehicle.

14. Cable Routing to the Front

Refer to section 24 of the manual for detailed instructions on
how to route the cables to the front of the vehicle.

15. Connection of Main Unit

Section 25 of the manual provides step-by-step instructions on
how to connect the main unit.

16. Connection of EZS/EIS Control Unit

Follow the instructions in section 26 of the manual to connect
the EZS/EIS control unit.

17. Assembly/Connection of Warning Buzzer

Refer to section 27 of the manual for detailed instructions on
how to assemble and connect the warning buzzer.

18. Connection of Ground

Section 28 of the manual provides step-by-step instructions on
how to connect the ground wire.

19. Connection of Parktronic Control Unit

Follow the instructions in section 29 of the manual to connect
the Parktronic control unit.

20. Connection to Fuse Box

Refer to section 30 of the manual for detailed instructions on
how to connect the product to the fuse box.

21. Exchange of Rear View Camera (If Installed)

Section 31 of the manual provides step-by-step instructions on
how to exchange the rear view camera, if installed.

22. Cable Routing for Rear View Camera

Follow the instructions in section 33 of the manual to route the
cables for the rear view camera.

23. Assembly of Vehicle

Refer to section 35 of the manual for detailed instructions on
how to assemble the vehicle after completing the installation.

24. Assembly of Park Assist Sensors

Follow the instructions in section 36 of the manual to assemble
the park assist sensors.

25. Coding Interface

Refer to section 37 of the manual for detailed instructions on
how to use the coding interface.

26. Additional Vehicle Function

Section 38 of the manual provides information on additional
functions that can be enabled for your vehicle using the
product.

Frequently Asked Questions (FAQ)

1. Q: What is the purpose of the Complete Set Active
   Parking Assistant Parktronic?

A: The Complete Set Active Parking Assistant Parktronic is a
parking assistance system designed to help drivers park their
vehicles safely and accurately.

2. Q: How can I obtain the necessary tools for
   installation?

A: You can purchase the necessary tools, such as screwdrivers,
pliers, and wire cutters, from automotive supply stores or online
retailers.

3. Q: Can I install the Complete Set Active Parking
   Assistant Parktronic on any vehicle?

A: The product is compatible with specific vehicle models and
years as specified by the manufacturer. Please refer to the product
documentation or contact the manufacturer for compatibility
information.

4. Q: Do I need professional assistance to install the
   product?

A: Basic knowledge of automotive electrical systems and wiring
is required for the installation process. If you are unsure about
any step, it is recommended to consult a professional
technician.

Installation Instructions
Complete Set Active Parking Assistant Parktronic
v1.0 (01.02.2023)

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: [email protected]

1

Contents

1 Liability Exclusion

3

2 Copyright

4

3 General notes

4

4 Safety Instructions

5

5 Requirements for the intended use

5

6 How to connect a cable to another

6

7 Note Cable Inscription/Color

7

8 Assembly Instructions

8

9 Assembly Note

9

10 Disassembly front bumper

10

11 Disassembly covering engine compartment

12

12 Disassembly sill trim front driver’s side

13

13 Disassembly center console

14

14 Disassembly main unit

15

15 Disassembly back seat

16

16 Disassembly covering rear driver’s side

17

17 Disassembly fuse box trunk – Coup´e

18

18 Disassembly rear bumper

19

19 Assembly rear sensors

20

20 Assembly front sensors

21

21 Assembly sensor holders with adhesive pads

23

22 Assembly/Connection control unit

24

23 Cable routing to the rear

25

24 Cable routing to the front

26

25 Connection main unit

28

26 Connection EZS/EIS control unit

29

27 Assembly/Connection warning buzzer

30

28 Connection ground

31

29 Connection bridge Parktronic control unit

32

30 Connection fuse box

33

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: [email protected]

2

31 Note exchange rear view camera (if a rear view camera is installed)

34

32 Disassembly tailgate covering – Coup´e

35

33 Cable routing rear view camera

37

34 Exchange rear view camera

38

35 Assembling the vehicle

39

36 Important Note: Assembly Park Assist Sensors

39

37 Coding interface

39

38 Additional vehicle function

39

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: [email protected]

3

8 Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.

3

12

4

7

5,6

8

2 1 1
3

8 8
68
7

1

1

2

4

8

5

8

8

Figure 3: Vehicle overview
· 1 Front Park Pilot sensors · 2 Park Assist sensors (brown) · 3 Main unit · 4 EZS (German abbreviation for electronic ignition switch, EIS) · 5 Parktronic control unit, ground connection, warning buzzer · 6 Fuse box (steady plus Kl.30) · 7 Rear view camera (if installed) · 8 Rear Park Pilot sensors
Please be aware that this overview is only for illustration purposes. Always lay the cable set in the most convenient and shortest way possible. For a detailed description of the cable routing, please refer to the relevant sections of the following manual.

Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: [email protected]

9

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>