FENIX TK22R Tactical And Duty Flashlight User Manual

: June 16, 2024
: FENIX

Table of Contents

PRODUCT DESCRIPTION
WARNING
FENIX TK22R FLASHLIGHT
OPERATING INSTRUCTIONS
TECHNICAL PARAMETERS
BATTERY SPECIFICATIONS
BATTERY REPLACEMENT
CHARGING
BATTERY LEVEL INDICATION
INTELLIGENT OVERHEAT PROTECTION
LOW-VOLTAGE WARNING
USAGE AND MAINTENANCE
INCLUDED
CUSTOMERS SUPPRT
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

FENIX TK22R Tactical And Duty Flashlight

PRODUCT DESCRIPTION

3200 LUMENS MAXIMUM OUTPUT
480 METERS MAXIMUM BEAM DISTANCE

WARNING

Do NOT shine the flashlight directly into the eyes of anyone!
AII information provided in this manual is subject to change without prior notice.
DO place this flashlight out of the reach of children!
Do NOT place light head near flammable objects, high temperatures can cause objects to overheat and become flammable/ignite!
Do NOT use the flashlight in inappropriate ways such as holding the unit in your mouth, doing scouted cause serious personal injury or death if the flashlight or internal battery fails!
This flashlight will accumulate a Significant amount of heat while operating, resulting in a high temperature of the flashlight shell. Pay close attention to avoid burns.
Turn off and lock the Ought or take out the battery to prevent accidental activation during storage or transportation.
The LED of this flashlight is not replaceable; so the whole flashlight will need to be replaced when the LED reaches the end of its lifespan.

FENIX TK22R FLASHLIGHT

3200 lumens max output .and 480 meters max beam distance.
Uses one Luminous SST70 LED with a lifespan of 50,000 hours.
One rechargeable ARB-L21-5000 V2.0 battery is included.
Patented Flexi Sensa Control switch for fast and convenient operation.
Hidden USB Type-C charging port.
Tactical and Duty modes for additional flexibility.
Patented dual-function tactical switch for instantly tactical activation and output selection.
Lockout function avoids accidental activation.
Reverse polarity protection, to protect from improper battery insertion.
Stainless steel strike bezel inlaid tungsten steel breaking tips.
Toughened ultra-clear glass lens with an anti-reflective coating.
O Made of durable A6061-T6 aluminum.
Premium type HAIII hard-anodized anti-abrasive finish.
Size: 6.22″ >< 1.57″ >< 1.00″/158 >< 40 x 25.4 mm.
Weight: 7.69 oz/218 g (including battery).

OPERATING INSTRUCTIONS

Switches
The round tail switch is for instant activation.
The Flexi Sensa Control tail switch is for mode switching.

On/off
Tap the tactical switch to momentarily tum on the light, release it the light will go out.
Fully press the tactical switch to constantly turn on/off the light.

Mode Switching
In any state, rotate the Flexi Sensa Control switch to select the needed mode.
Tactical Mode

TECHNICAL PARAMETERS

ANSI/PLATO FL1

| TACTICAL MODE| DUTY MODE|

LOCK/OFF MODE

---|---|---|---
TURBO| STROBE| TURBO| HIGH| MED|

LOW

/

/

IMPACT RESISTANCE| | 1 meter
SUBMERSIBLE| | IP68

Note: The above specifications are from the results produced by Fenix through its la >Oratory testing using the Fenix ARB-L21-5000 V2.0 battery, under the temperature of 21 ±3°C and humidity of 50% – 80%. The true performance of this product may vary aording to different working environments and the actual battery used. •The Turbo output is measured in total of runtime including output at reduced levels du e to temperature or protection mechanism in the design.

With the light switched on, tap the tactical switch to cycle through Turbos Trobe. →

Duty Mode
With the light switched on, tap the tactical switch to cycle through Low→ Med →High→ Turbo.

Lock/off Mode
In any state, rotate the Flexi Sensa Control switch to Lock/off mode to tum off and lock the flashlight.
With the light switched on, rotate the Flexi Sensa Control switch to Tactical mode or Duty mode to unlock the light and recall the previously used output.

Intelligent Memory Circuit
The light memorizes the last selected output including Strobe. When turned on again the previously used output will be recalled.

BATTERY SPECIFICATIONS

Type| Dimens i ons| Nominal **voltage| Usability**|
---|---|---|---|---
FenixARB-L21-5000 V2.0| 21700| 3.6 V| Recommended| ✔✔
Fenix ARB-L21-5000U| 21700| 3.6 V| Recommended| ✔✔
Fenix ARB-L21-4000P| 21700| 3.6 V| Recommended| ✔✔
Other types of 21700 battery| 21700| 3.6 V| Caution'”|

!

Warning: It is strictly prohibited to use the 18650, CR123A, or 16340 battery. *21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only using quality batteries with circuit protection will reduce the potential for combustion or explosion. Cell damage or short circuiting are considered user induced damage and are not covered by any Fenix warranty or liability.

BATTERY REPLACEMENT

Unscrew the tail cap and insert the battery with the anode side ( +) towards the light head, then screw the tail cap back on.

CHARGING

Loosen the light head to reveal the USB Type-C charging port and plug the USB-A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light.
The indicator will display red while charging and will tum green when fully charged.
Once charging is completed, be sure to tighten the light head to maintain the dustproof and waterproof ability.

Note:

When charging fails or the battery is reversely connected, the battery indicator will flash red to remind the user to check the battery.
The normal charging time of the flashlight is about 3.5 hours from depletion to fully charged. The flashlight cannot be operated while charging. *These features only work with a Fenix ARB-L21 series battery.

BATTERY LEVEL INDICATION

Each time the light is turned on, the indicator (unscrew the light head to see) will indicate the battery level and will last for 3 seconds.
Green light on: saturated 100% – 85%
Green light flashes: sufficient 85% – 50%
Red light on: poor 50% – 25%
Red light flashes: critical 25% – 1 %
Note: This feature only works with Fenix ARB-L21 series battery

INTELLIGENT OVERHEAT PROTECTION

The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C/140°F or .above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C/140°F, the light will gradually recall the preset output level.

LOW-VOLTAGE WARNING

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output, the light blinks 3 times every 5 minutes to remind you to recharge or replace the battery.
Note: This feature only works with Fenix ARB-L21 series battery.

USAGE AND MAINTENANCE

Disassembling the sealed head can cause damage to the light and will void the warranty.
Fully charge the light in time to ensure normal function the next time it is needed.
Fenix recon, mends using an excellent quality battery.
If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
Tum off and lock the light or take out the battery to prevent accidental activation during storage or transportation.
Long-term use can result in 0-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Replace or recharge the battery (Ensure the battery is inserted according to the manufacturer’s specifications).
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don’t work, please contact your authorized distributor.

INCLUDED

Fenix TK22R flashlight, ARB-L21-5000 V2.0 battery, Type-C charging cable, Holster, Lanyard, 2 x Spare O-rings, User manual, Warranty card

CUSTOMERS SUPPRT

FENIXLIGHT LIMITED

Tel: +86-755-29631163/83/93 Fax: +86-755-29631181
E-mail: info@fenixlight.com Web: www.fenixlight.com

Address: 2F/3F, West of Building A, Xinglong Technology Park, 111 Sheik Road, Fenghuanggang Community, Xinxiang Street, Bao’an District, Shenzhen City, Guangdong Province, China

LIGHTING FOR EXTREMES

FACEBOOK

WECHAT

“Follow” us for more information about Fenix

Documents / Resources

| FENIX TK22R Tactical And Duty Flashlight [pdf] User Manual
TK22R Tactical And Duty Flashlight, TK22R, Tactical And Duty Flashlight, Duty Flashlight, Flashlight
---|---
| FENIX TK22R Tactical And Duty Flashlight [pdf] User Manual
61.149.221.079, TK22R Tactical And Duty Flashlight, TK22R, Tactical And Duty Flashlight, Duty Flashlight, Flashlight
| FENIX TK22R Tactical and Duty Flashlight [pdf] Instruction Manual
TK22R Tactical and Duty Flashlight, TK22R, Tactical and Duty Flashlight, Duty Flashlight, Flashlight