BRIO Light Up Construction Toy Crane Instructions

: June 4, 2024
: BRIO

Table of Contents

To assemble the crane for the ﬁrst time:
Functionality:
Keep in mind that:
Replacing batteries:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Light Up Construction Crane
33835

To assemble the crane for the ﬁrst time:

Place the grey crane base (A) on a ﬂat surface and then click in the vertical pillar (B) of the crane into the grey crane base(A) as shown in the picture.
Finalize the assembly by mounting the crane’s horizontal loading arm (C) onto the top of vertical pillar (B) of the crane.

Functionality:

Lift and load the colorful containers with the magnetic clutch mechanism and then turn the red knob to raise or lower the load in any direction around the crane. Turn the crane’s horizontal loading arm 360° in any direction to activate the cool red warning lights on the top of the crane to create a realistic play scenario.

Keep in mind that:

The crane is not water-resistant and should never be washed in a dishwasher. Wipe oﬀ the crane with a clean cloth to remove any foreign materials.
For safety reasons, do not disassemble the toy.
The color of the crane may fade over time.
Avoid strong sunlight and other sources of heat.
Only indoor play with the crane is recommended.

Replacing batteries:

The light eﬀects for this toy are powered by 2 x 1,5V (LR44) button cell batteries (included). Use a screwdriver to open the battery cover (see illustration). Install the batteries as shown (+/–). Close the battery cover and tighten the screw.

Warning:

Dispose of used batteries immediately.
Keep new and used batteries away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Important:

Only adults should install and replace batteries.
Diﬀerent types of batteries or new and used batteries are not to be mixed.
Only recommended batteries of the same or equivalent type as recommended (1.5V) are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the toy.
The supply terminals are not to be short-circuited.
Always remove batteries if the toy is not to be used for some time.
Protect the toy from water or dampness.
Do not attempt to recharge non-rechargeable batteries..
Rechargeable batteries are to be removed from the toy before being charged.
Rechargeable batteries are only to be charged under adult supervision.
Used batteries and electrical components must be disposed of at an approved collection point.
Electrical components or batteries must not be thrown with household waste.

Please retain for future reference!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

BRIO AB, Box 305, SE-201 23 Malmö, Sweden. Tel: +46 40 619 40 00.