RING 3rd Gen Stick Up Cam Plug Indoor and Outdoor Home Security Camera User Guide
- June 16, 2024
- Ring
Table of Contents
RING 3rd Gen Stick Up Cam Plug Indoor and Outdoor Home Security Camera
Set up your Stick Up Cam.
Download the Ring app.
The Ring app walks you through setting up and managing your Stick Up Cam.
Search for “Ring” in one of the app stores below, or visit: ring.com/app
Power it up!
First, plug the included power cable into the back of your Stick Up Cam.
Then plug the power adapter into an outlet.
Set up your Stick Up Cam in the Ring app.
In the Ring app, select Set Up a Device.
When prompted, select Security Cams and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in the Ring app to see live video from your Stick Up Cam.
Blue light flashing?
If the light on the front of your Stick Up Cam is flashing after setup, it’s updating its software.
Do not unplug your Stick Up Cam while the light is flashing!
How to use Stick Up Cam on a table or shelf:
Place it at your chosen location, then plug it in. Your Stick Up Cam is now ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure you have the view you want.
If you’d like a downward camera angle…
Swivel the base around so that the long side faces the front, then tilt your Stick Up Cam so it points downward.
How to install Stick Up Cam on a wall:
Remove the base.
Unscrew it using a standard Phillips-head screwdriver (not included).
Re-attach the base.
Screw it into the back of your Stick Up Cam with the “UP” arrow on the bracket pointing upward.
Mount your Cam.
Guide the grooves in the base onto the hooks on the bracket. Slide Stick Up Cam down to secure it to the wall.
Check it out!
Now plug your Stick Up Cam back in, and rotate it to your desired angle. Check out the live video in the Ring app to make sure you have the view you want.
Install the security screws (optional).
Your Stick Up Cam comes with two optional security screw locations.
One secures the mounting bracket to the base, and the other secures the battery compartment.
To access them after you’ve mounted your Stick Up Cam, rotate it to either side.
Installing outdoors?
Remove the indoor plug faceplate by pressing the “PUSH” button and sliding it off of the adopter. then grebe the included outdoor power cable, and slide it’s connector onto the power adapter until it clicks into place.
If you plan to install Stick Up Cam outdoors, secure the power adapter to a wall or floor with the included screws.
Grab your Wi-Fi password.
You’ll need it to set up your Stick Up Cam.
Write it down below so it’s handy when you need it:
Install your Stick Up Cam.
Choose a location
Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to sit on a flat surface like a table or shelf, but can also be mounted to a wall.
Choose a spot where it can provide the view you want, within reach of a power outlet.
- **Table or shelf
**
- **Mounted on a wall
**
Wanna mount to a ceiling?
Mount to a ceiling with the Ring Stick Up Cam Mount (sold separately).
Install the security screws (optional).
Your Stick Up Cam comes with two optional security screw locations.
One secures the battery compartment, and the other secures the mounting bracket to the base. To use them, open the battery compartment and/or remove the mounting bracket, then pop out the rubber plug(s).
- Swivel the base so the long side faces the front.
- Insert and drive the security screw into the base screw location with a standard Phillips-head screwdriver (not included).
- Turn your Stick Up Cam over to access the battery compartment screw hole, and drive the second security screw.
Remove the mounting bracket.
Slide it down to remove it from the base.
Drive the screws.
Hold the bracket against your wall, making sure the “UP” arrow is pointing upward, and mount it with the included screws.
To install the base screw…
First, slide your Stick Up Cam off of the mounting bracket.
Pop the rubber plug out of the base, then place Stick Up Cam back on the bracket.
Secure with one of the provided screws.
To install the battery compartment screw…
Remove the battery compartment, pop out the rubber plug, then replace the battery compartment on your Stick Up Cam.
Secure with one of the provided screws.
For additional help, visit: ring.com/help
Or give us a call…
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide +1 310 929 7085
For a list of all our customer support numbers, visit: ring.com/callus
Customer Support
To review your warranty coverage, please visit
www.ring.com/warranty.
© 2019 Ring LLC or its affiliates.
Ring and all related logos are trademarks of Ring LLC or its affiliates.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>