AWOL MW-100 Matte White Projection Screen Instruction Manual

: June 16, 2024
: AWOL

Table of Contents

AWOL MW-100 Matte White Projection Screen
PRODUCT INFORMATION
PACKING LIST
Precautions
Assemble the frame
Assemble the screen
Assemble screen and inner frame
Outer frame installation
Mount on the wall
Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AWOL MW-100 Matte White Projection Screen

PRODUCT INFORMATION

Specifications:

Model: AWOL Vision Matte White Screen

Size| Material| Gain| Resolution| Viewing Angle| Projection Ratio| Screen Weight| Package Weight| Package Size
---|---|---|---|---|---|---|---|---
100 inch| Matte white| 1.3 dB| up to 8K| 16:9| Long Throw Projector| 17.2 lbs / 7.8 kg| 25.41 lbs / 11.5 kg| 1405230130MM
(55.39.15.2 inch)
120 inch| Matte white| 1.3 dB| up to 8K| 16:9| Long Throw Projector| 21.4 lbs / 9.7 kg| 28.7 lbs / 13 kg| 1650230130MM
(65.09.15.1 inch)

Precautions:

Read the manual carefully before installation and use.
Wear gloves to avoid staining the screen with fingerprints.
Handle the screen carefully to avoid scratching it.

Assembly Instructions

Assemble the Frame:

Open the package and check if all accessories are complete.
Connect inner frame A and inner frame B.
Insert the 4 corner connectors into inner frame C.
Assemble the four inner frames and struts, then lock them with screws.

Assemble the Screen:

Wear gloves and lay a clean cloth on a flat, clean surface.
Take out the screen from the package and unfold it with the screen projection face down and the black side up.
Carefully insert the glass fibre strips around the screen.

Mount on the Wall:

Install wall hangers on the wall according to screen size.
Estimate the installation position of the screen before installing the wall pendants.
Drill holes in the marks on the wall, insert the rubber plug, screw on the screws, and fix the wall bracket.
Hang the assembled screen on the wall (operated by two persons).

FAQ:

Q: What are the compatible projectors for the AWOL Vision Matte White Screen?
A: The screen is compatible with Long Throw, Short Throw, and Ultra Short Throw projectors.
Q: How should I clean the screen?
A: Use a soft cloth or microfiber cloth to gently wipe the screen. Avoid using any abrasive materials or cleaning agents.
Q: Can I adjust the height of the screen?
A: Yes, you can adjust the height of the screen by installing the wall hangers at a desired position.

Thank you for chossing the AWOL Vision Matte White Projection Screen. Please read this manual carefully before installtion and use.

PACKING LIST

Precautions

To ensure the projection performance of this product, please pay attention to the following operating requirements.

When assembling, find a suitable size floor or table. The surface must be clean and free of any obstacles. The floor or table must be covered with clean materials such as cloth, film, blankets, etc.
Handle with care during installation to prevent personal injury or property damage.
Do not touch the surface of the projection screen with ungloved hands.
Do not touch the projection surface with sharp or hard objects to prevent damage to the screen material.
Keep children away from the screen to prevent accidents.
The surface of the screen must be cleaned and treated regularly, and it is recommended to take care of it once every two weeks.
Please use a soft cotton cloth to wipe (dip some water) gently, and it is not advisable to use any chemical cleaners or alcohol.

Assemble the frame

Open the package and check whether the accessories in the box are complete.
Connect inner frame A and inner frame B first (Figure 1)
Insert the 4 corner connectors into the inner frame C (picture 2)
Assemble the four inner frames and struts as shown in the figure below, and lock them with screws after the inner frame is assembled (Figure 2, Figure 3);

Assemble the screen

Wear gloves (to avoid the screen being stained with fingerprints that can not be erased). Lay a clean cloth on a flat, clean surface (or ground) to protect the screen.
Take out the screen from the package, turn the screen face down, unfold the screen, and then according to the length of the glass fiber strips, take the glass fiber strips insert to around of screen as shown below.

Important note: Please cooperate with two people when assembling, and do not make any actions that may cause the screen to fold or rub against hard objects.

Assemble screen and inner frame

Put the assembled frame on the screen. Align the frame with the line marks on the four corners of the screen (Figure 6)
Adjust the position of the screen and the frame so that the frame is in the middle of the screen, and check the overall flatness of the screen. before installing the tension spring.
Hang the screen on the frame with the tension spring. Please follow the following sequence for hooking tension springs, Firstly install the four corner springs in the order of 1~8; then hang the middle springs 9~12, and finally spring from the middle, and install the other springs symmetrically in turn (Figure 7)

Outer frame installation

Splice the outer frame A and outer frame B into a complete frame (Figure 8), and drive the hexagonal studs into the long frame splicing strip (Figure 9)
Put the outer frame against the frame screen, align the four corners, connect the surroundings with corner connector and lock all the screws (Figure 10)
Use screws to lock the joints of the outer frame on the hexagonal studs, and clip the corner protectors into the slots of the outer frame (Figure 11)

Mount on the wall

Install wall hangers on the wall according to screen size. Required tools: level, hammer drill, pencil, ladder, etc. As shown below. Please estimate the installation position of the screen before installing the wall pendants. The height of the lower edge of the screen from the ground is generally about 50~80cm.
Drill holes on the marks on the wall with a percussion drill, insert the rubber plug, screw on the screws, and fix the wall bracket (Figure 13)
Hang the assembled screen on the wall (operated by two persons) (Figure 14)