TEC BEAN JH0G-M 3 Speed White True HEPA Air Purifier User Manual

TEC BEAN JH0G-M 3 Speed White True HEPA Air Purifier

CUSTOMER SERVICE
Our customer service team is standing by to assist you if you have any questions or concerns.

PACKAGE CONTENTS
Air Purifier
Filter (Pre-installed)
Power Adapter (inside of the filter for shipping safety) User Manual

SAFETY PRECAUTIONS

BEFORE USE

To avoid electric shock or a fire hazard, please plug the air purifier only into AC 700V~240V 50/60Hz power adapter.

• Please do not use any other power adapter than the one provided with the air purifier.
• Please do not use the air purifier if the power
• Please grip the power plug before disconnecting it to avoid electric shock, fire, or any other damage caused by a short circuit. Do not pull the power cord.
• Please do not place objects near the air inlet or outlet.adapter/cacord/plug/socket has been damaged, and ask the manufacturer or the professional technician to replace it.
• Please keep your air purifier away from water, and wet or damp areas (eg. shower room, etc.). Do not let water, other liquid, or flammable detergent enter the appliance to avoid electric shock or a fire hazard.
• Always place the unit on a dry and stable surface.
• Please do not sit or place heavy objects on the air purifier.
• Please place the air purifier at least 7ft/30cm away from the wall or furniture.
• Do not block the air inlet and outlet. There should be a certain space around the air purifier.

RESTRICTIONS

• If there is a flame in the room, please do not use the air purifier.

• When flammable gases, vapors, metallic dust, aerosol (spray) goods, or fumes from industrial oil are present, do not use an air purifier to avoid any electric shock, fire disaster, or any other damage.
  Please do not use the air purifier without a filter

• Please do not insert your fingers or foreign objects into the air inlet/outlet.
  Please place the air purifier away from hot surfaces and heat-generating appliances.
  In case of product failure, malfunction, please unplug the air purifier immediately.
  Be sure to turn off and unplug the air purifier when replacing it.

CLEANING

• Please do not clean and reuse the composite filter.
• Please clean the air purifier with a soft dry cloth.
• To avoid any electric shock, fire disaster, or any other damage, please do not spray water directly on the air purifier or use chemical cleaners such as alcohol or hydrochloric acid to clean the air purifier.
• To avoid any electric shock, fire disaster, or any other damage, please clean the plug only when the air purifier is turned off or not in use.

CAUTIONS

• Please always keep the air purifier out of reach of patients, children and pets.
• Children shall not play with the air purifier. This appliance can be used by children aged 8 upwards if they are supervised or have been given instructions concerning the use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children unless they are aged 8 upwards and supervised. Keep the air purifier and its cord out of reach of children younger than 8 years old.
• The air purifier can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instructions concerning the safe usage of the air purifier and understand the hazards involved.

PRODUCT DIAGRAM

1. Touch screen control panel
2. Air Outlet
3. Night Light
4. Air Inlet
5. Original 3-in-l True HEPA Filter
6. Base Cover
7. Power Input Port
8. Cover Lock
9. Twist Handle
10. Anti-slip Mats
11. Power Adapter

SPECIFICATIONS

CONTROL PANEL DIAGRAM

7. Child Lock Indicator

2. Child Lock Button
3. Timer Button
4. Timer Indicators
5. Power Button
6. Night Light Button
7. Fan Speed Indicators
8. Fan Speed Button
9. Filter Replacement Button & Indicator

Power Button
Connect the air purifier to the power adapter, air purifier enters standby mode by default. To activate the air purifier, press the” “button, all the indicators light up. When the air purifier is turned on, press the” (‘.) “button to put it into standby mode.

Note

1. Plug in the power adapter and press the power button to turn on the purifier. When the purifier is switched on, the filtration speed level l is always set automatically. In the stand by state, the air purifier wi 11 remember its previous fan speed setting.
2. When the appliance is in use, the backlight and indicator lights of all the buttons (except for the power button) are turned off when there is no action for 10 seconds. Tap any button to light them up.
3. The night light can still be adjusted when the air purifier is in a standby state.

Fan Speed Button
Press the” “button repeatedly to set the required fan speed level (l ➔ 2 ➔ 3). When adjusting the fan speed, fan indicator light is turned on. Keep windows and doors closed while the air purifier is running to get the best results.

Timer Button
Press the” “button repeatedly to pick the required operating time (2, 4, 8 hours, OFF). When the timer is activated, the indicators will light up. When the timer runs out, the air purifier will turn off automatically.

Child Lock Button
Press and hold the” “button for 3 seconds to activate the child lock mode, the” “indicator will light up. When the child lock is activated, none of buttons are responsive.
If any errors occur when the child lock is turned on, the “8 “indicator will flash three times in one second as a reminder.
To unlock the child lock, press and hold the” “button for 3 seconds.

Night Light Button
When the air purifier is on, press the” “button to turn on the night light. Press again to turn it off.
When the air purifier is turned on, press and hold the” ” button to gradually increase the brightness of the night light; press and hold the” “button again to gradually decrease the brightness of the night light. Long press the ” “button to adjust the light brightness.

Filter Replacement Button & Indicator
Once the air purifier is powered on, filter lifetime counter will count down (7800-4800 hours depending on the fan speed setting and the ambient area air quality). The” button will usually stay half-bright. When the filter lifetime reaches less than 70%, it will turn solid red, and when it reaches 0%, it will flash red, reminding you to change the filter. To reset the filter lifetime counter, press and hold the ” “button for 5 seconds after installing the new filter. The” “button will cease blinking red after the reset is complete. The filter lifetime will be recalculated by the air purifier.
Note
Press and hold the” “button for 5 seconds to reset the filter lifetime counter if the filter has to be replaced before the” “button flashes red. The air purifier will recalculate the filter lifetime after the reset is complete.

3-STAGE PURIFICATION

FILTRATION SYSTEM
For dust, pollen, smoke, fiber, animal dandruff, etc. This purifier effectively removes PM2.5 (smoke, dust, pollen, etc.) from the indoor air; it purifies the air and removes harmful gaseous pollutants.

PURIFICATION PROCESS

• Pre-Filter
  The Pre-Filter captures large particles such as dust, lint,
  fibers, hair, and pet fur, etc, extending the life of the true HEPA filter.

• True HEPA Filter
  The True HEPA Filter efficiently removes PM2.5, dust mites, smog, pet dander, pollen, and other fine particles.

• Activated Carbon Filter
  High-quality Activated Carbon Filter removes smoke, odors, fumes, volatile organic compounds (VOCs), and other odorous pollutants, etc.

FILTER REPLACEMENT

1. Turn off the air purifier and  unplug the power adapter.
2. Unlock the base cover by rotating the twist handle counterclockwise
3. Remove the old filter.
4. Remove the new filter protective film before installation
5. Place the new filter into the air purifier and put the base cover back.
6. Align the base cover locking notches and rotate it clockwise until it clicks into place.
7. Plug in the power adapter and turn the air purifier on.
8. Press and hold the” l “button for 5 seconds to reset the filter lifetime counter. The” ” button will cease flashing red and remain half-bright once the reset is complete.

MAINTENANCE

Cleaning the Air Purifier

• Unplug before cleaning.
• Wipe the outer surface of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediatelywipe it dry cloth.
• Do not clean with abrasive chemicals or flammable cleaning agents.

Cleaning the Filter

• The pre-filter should be cleaned every2–4 weeks to increase the efficiency and extend its lifespan.
• Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles.
• Do not clean the filter with water or any liquids.
• Do not clean the true HEPA & activated carbon filter.

TROUBLESHOOTING

plug well.
The air purifier produces a strange smell.| Filter carries too many odors or dust.| Clean the filter or replace if necessary.
Filter lifespan expired.| Replace the filter.
Poor air purification quality.| ** The filter protective film is not removed.| Make sure the filter is locked in place properly with the protective film removed.
The ambient air quality of the room is very poor.| Open the window to improve air ventilation.
The air purifier is placed in an unventilated place or is blocked by a barrier.| Do not block the air inlet and outlet,e.g. placing items on the air o utl et or in front of the air inlet closer than1ft/30cm.
** Air purifier makes an unusual noise while the fan ison.| The filter protective film is not removed.| Make sure the filter is locked in place properly with the protective film removed.
The air inlet or outlet is blocked by a barrier.| Do not block the air inlet and outlet,e.g. placing items on th e air o utl e t or in fr ont o f the air inlet closer than1ft/30cm.
PROBLEM| POSSIBLE CAUSE| SOLUTIONS
---|---|---
| | To unlock the child
None of buttons are responsive.| Child lock is activated.| lock, press and hold the”@” button for
| | 3 seconds.
| | To reset the filter
The” Cl]) “ button is still flashing red after replacing

the filter.

| The filter lifetime counter has not been reset.| lifetime counter, press and hold the” Cl]) ” button for 5 seconds. The” CLJ) “button will cease blinking red
| | after the reset is
| | complete.

The possible issues with this appliance are listed in the table above. Please contact our after-sales support center if you can’t find the answer

•  www.tecbeanshop.com
• support@tecbeanshop.com 
• l-888-899-3360
•  m.me/TecBeanShop
• Made In China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>