ring A19 LED Smart Light Bulb User Manual

: June 16, 2024
: Ring

Table of Contents

ring A19 LED Smart Light Bulb
OPERATING INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ring A19 LED Smart Light Bulb

Specifications:

Product : Smart Lightbulb
Type : Dimmable Neutral White A19 LED Bulb
Warning : Risk of electrical shock. Do not attempt to open or disassemble the bulb.
Not suitable for use with standard wall dimmers.
Suitable for damp locations. Do not use where directly exposed to water.
Not intended for use with emergency exit fixtures or emergency lights.

Product Usage Instructions :

Precautions :

Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn.
Dispose of this device in accordance with disposal laws in your area.
Not compatible with photo sensors, motion sensors, or timers unless specifically designed for Ring Smart Lighting.

Operating Instructions :

Use the bulb only in a socket rated for this bulb.
This device is not a toy designed to be played with by children.
Do not place the device on hot surfaces.
For safety reasons, do not open devices, which will also void the warranty.

Setup Instructions:

Download the Ring app. The app walks you through setting up and managing your Ring Smart Lightbulb. Search for Ring in one of these app stores, or visit: ring.com/app Set up your Ring Bridge. The Bridge is required to connect your Ring Smart Lights to the Ring app and other compatible Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. Choose a location.Determine where you would like to install your A19 bulb. If your desired socket is hard to reach, you can set up your new bulb in an easily accessible socket. Once setup is complete, you can move it to your desired location. Turn off the power. Before you continue, make sure you turn off power to the light fixture. Remove the old bulb. Turn counterclockwise to remove it from the socket. Set up your A19 in the Ring app. In the app, tap Set Up a Device. When prompted, select Smart Lighting and follow the in-app instructions to install your Smartbulb. You’ll need to restore power to the bulb so it can connect to the Bridge during setup.Once your bulb is set up, don’t forget to keep your light switch ON. You will then be able to control your light directly from the Ring app where you can set schedules and link your bulbs to other devices.

FAQ :

Q: Can I use this bulb with a standard wall dimmer?
A: No, this bulb is not suitable for use with standard wall dimmers. Please use it in a socket rated for this bulb.
Q: Is this bulb safe to use in damp locations?
A: Yes, this bulb is suitable for damp locations. However, do not use it where directly exposed to water.
Q: Can I use this bulb with photo sensors, motion sensors, or timers?
A: No, this bulb is not compatible with photo sensors, motion sensors, or timers unless specifically designed for Ring Smart Lighting.

For further assistance, visit : ring.com/help or contact our customer support:

US : 1 800 656 1918
Canada : 1 855 300 7289
Worldwide : +1 310 929 7085

For all our customer support numbers, visit:ring.com/callus

WARNING : Risk of electrical shock. Do not attempt to open or disassemble the bulb. Not suitable for use with standard wall dimmers. Suitable for damp locations. Do not use where directly exposed to water.

This device is not intended for use with emergency exit fixtures or emergency lights. Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn. Dispose of this device in accordance with disposal laws in your area

Not compatible with photo sensors, motion sensors or timers unless specifically designed for Ring Smart Lighting.

OPERATING INSTRUCTIONS

Use the bulb only in a socket rated for this bulb. This device is not a toy designed to be played with by children. Do not place the device on hot surfaces. For safety reasons, do not open devices, which will also void the warranty.

Download the Ring app.

The app walks you through setting up and managing your Ring Smart Lightbulb. Search for “Ring” in one of these app stores, or visit: ring.com/app

Set up your Ring Bridge.

The Bridge is required to connect your Ring Smart Lights to the Ring app and other compatible Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual.

Choose a location.

Determine where you would like to install your A19 bulb. If your desired socket is hard to reach, you can set up your new bulb in an easily accessible socket. Once setup is complete, you can move it to your desired location.

Turn off the power.

Before you continue, make sure you turn off power to the light fixture.

Remove the old bulb.

Turn counterclockwise to remove it from the socket.

Set up your A19 in the Ring app.

In the app, tap Set Up a Device. When prompted, select Smart Lighting and follow the in-app instructions to install your Smart bulb. You’ll need to restore power to the bulb so it can connect to the Bridge during setup.

You’re all set!

Once your bulb is set up, don’t forget to keep your light switch ON. You will then be able to control your light directly from the Ring app where you can set schedules and link your bulbs to other devices.

For help, visit : ring.com/help Or give us a call…