GIANT Liv momentum EnergyPak Smart Charger Compact User Guide
- June 16, 2024
- GIANT Liv momentum
Table of Contents
GIANT Liv momentum EnergyPak Smart Charger Compact
Smart Charger 4A, 48V, dual
The 4A Smart Charger is a powerful charger for our high capacity EnergyPaks. The smart charger continuously monitors the internal state of the battery and adjusts the charging process accordingly for the fastest charging speed and the maximum battery lifespan.
Parts Description
- A. AC socket (11 0V~240 V)
- B. Charger
- C. 60% charge indicator LED/ button
- D. 100% charge indicator LED
- E. Charge socket
LED Status Description
- A. LED
- B. Button / LED
If there is a charging issue, please check the charging circuit, and disconnect the AC source of the charger, and then reconnect it after the LED goes out.
Smart Charger 4A, 36V, dual
Parts Description
- A. AC socket
- B. Charger
- C. Button
- D. LED
- E. Charge socket
LED Description
- A. LED
- B. Button
If there is a charging issue, please check the charging circuit, and disconnect the AC source of the charger, and then reconnect it after the LED goes out.
Smart Charger 6A, 36V, single
Parts Description
- A. AC socket
- B. Charger
- C. Button/ LED
- D. LED
- E. Charge socket
LED Description
- A. LED
- B. Button/ LED
If there is a charging issue, please check the charging circuit, and disconnect the AC source of the charger, and then reconnect it after the LED goes out.
Smart Charger 4A, 36V, single
Parts Description
- A. AC socket
- B. Charger
- C. Button
- D. LED
- E. Charge socket
LED Description
- A. LED
- B. Button
If there is a charging issue, please check the charging circuit, and disconnect the AC source of the charger, and then reconnect it after the LED goes out.
Fast Charger 3A / 4A
Parts Description
- A. AC socket
- B. Charger
- C. LED
- D. Charge socket
LED Description
- A. LED
Charging
CAUTION:
- Always take care to align all connectors properly before connecting.
- Charge the EnergyPak battery at room temperature (±20°C/68° F).
- Charging below 0°c or above 40°C (32° F~104 ° F) can lead to insufficient charging and can have a negative impact on the battery life cycle.
- Make sure the bike is steady and standing firmly when charging the EnergyPak on the bike.
- Do not sit on the bike, move the bike or rotate the cranks while the charger is connected to the bike.
With the EnergyPak attached to the bike.
- Start charging:
- Connect the charger to the charge port of the EnergyPak.
- Connect the charger to an AC outlet.
- The charging process starts.
- Stop charging:
- Disconnect the charger from the AC outlet;
- Disconnect the charger from the EnergyPak.
With the EnergyPak removed from the bike.
- Start charging:
- Remove the EnergyPak from the bike.
- Connect the charger to the charge port of the EnergyPak.
- Connect the charger to an AC outlet.
- The charging process starts.
- Stop charging:
- Disconnect the charger from the AC outlet;
- Disconnect the charger from the EnergyPak.
- Place the EnergyPak back into the bike.
INFO:
- The LED(s) on the charger show the process status.
- The LED indicator on the EnergyPak shows current energy level.
- Charging can be stopped/interrupted at any time.
NOTICE: Disconnect the charger from the EnergyPak and AC outlet when the EnergyPak is fully charged.
GIANT UK LTD.
Charnwood Edge, Syston Road, Cossington, LE7 4UZ,UK
Manufacturer:
QQE Technology Co., Ltd.
3F., No. 541, Zhongzheng Rd.,
Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>