BrightSites SmartPole G1 – UrbanWit Smart Pole User Guide
- June 16, 2024
- BrightSites
Table of Contents
BrightSites Smart Pole G1 Urban Wit Smart Pole User Guide
Mounting Instructions
Type Name| Power| Voltage| Appearance| Weight(KG)| Dimension| Materials|
Fabrication processing| Appearance color
---|---|---|---|---|---|---|---|---
Base| | | A| 145| Height:1685mm| Q345| Hot-drip galvanizing anti- corrosion|
RAL7043
King rod (2m)| | |
B
| 77| φ160φ2192115mm| Q345| Hot-drip galvanizing anti- corrosion| RAL7043
King rod (6m)| | | 152| φ160φ2196115mm| Q345| Hot-drip galvanizing anti-
corrosion| RAL7043
King rod (10m)| | | 226| φ160φ21910115mm| Q345| Hot-drip galvanizing anti-
corrosion| RAL7043
Adapter| | | C| 3.2| | Q345| Hot-drip galvanizing anti-corrosion| RAL7043
Fittings of king rod| | | D| 1.8| φ110305mm| Q345| Hot-drip galvanizing anti-
corrosion| RAL7043
Fittings of lamps| | | E| 1.2| φ60105mm| Q345| Hot-drip galvanizing anti-
corrosion| RAL7043
HK ballhead camera| 8W| DC12V| F| 0.95| φ140107mm| | |
HK box camera| 17W| DC12V| G| 1.45| 206103100mm| | |
TVT ballhead camera| 15W| DC12V| H| 2.1| φ173247mm| | |
LED screen (P2.5) single face| 230W/㎡| AC220V| I| 13| 320740120mm| | |
LED screen (P4) single face| | | | 25.6| 5121224120mm| | |
Meteorological sensor| 0.8W| AC220V| K| 0.6| φ141251| | |
Sound equipment| 40W| AC220V| L| 2.8| 505150100| | |
Outdoor WIFI| 8W| DC48V| N| 1.7| 880200*80mm| | |
Lamp cap| | | M| | | | |
Intelligent lamp post control box 3U| | AC220V| Q| | 355x 192x 105 mm| ABS| |
Intelligent lamp post control box 4U| | | |
Intelligent lamp post control box 5U| | | |
Rod body
Assembly of lamp post
-
Horizontal lamp post
Base and king rod are horizontally placed on the ground -
Mounting of fitting
Adapter and fittings connect king rod -
Threading
Steel wire passes through king rod and binds network cable and power line on steel wire to make them pass through kind rod together -
Wiring
Network cable of plug-in device connects power line when the network cable and power line are threaded in the last step -
Mounting of rod-borne equipment
Plug-in devices are mounted on rod body after network cable connects power supply -
Mounting of base
-
King rod connects base with 4 big screws
Upright tube
Lamp post is hung at the position of base
Lamp post is mounted with hole site to align at foundation.
Screw is tightened
System connection
Equipment locker is opened, where the control box is mounted.
Equipment box is opened and supplied by 220V power of plug-in devices
Wiring instructions of equipment box
Close the door
-
Please read the manual carefully before using this product. Please keep this manual as the future reference
-
This product shall be mounted by the qualified electricians and the wiring shall conform to the IEE electrical standard or national standards
-
The manufacturers aren’t responsible for the damage caused due to improper usage or voluntary change of product structure. This product is only limited to the indoor use.
-
If the external cables of equipment boxes are damaged, they shall be replaced by the service institution of manufacturer or the qualified personnel to avoid damage.
-
The service voltage shall not exceed ±10% of rated voltage.
-
Please power off if finding abnormality or any operation problems, then contact the Philips dealer.
-
Please clean up regularly (once a half year) in order to keep the operation effect of lamp post.
The dirty position of lamp shall be wiped by the soft cloth by digging soapy water after wringing out and then is wiped up with dry cloth. Please power off before cleaning. -
Please don’t wipe the surface of lamp post with banana oil and other volatile substances and splash any chemical agents on lamp post, otherwise, the lamp post may discolor or be damaged
-
Lamp post shall not be stored and used in the corrosive atmosphere or the environment containing hazardous substances such as sulfides, halogenide, phthalic acid ester, etc.
Wiring Diagram for Power to Devices
Wiring Diagram for Data Communication
© 2019 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. All trademarks are owned by Signify Holding or their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>