YLF C20 Fidget Spinner Magnetic Wireless Charger User Guide

June 16, 2024
YLF

YLF C20 Fidget Spinner Magnetic Wireless Charger User Guide
YLF C20 Fidget Spinner Magnetic Wireless Charger

PACKAGING LIST

  • YLF-C20

  • **TYPE-C

**

  • **operation instructions

**

PRODUCT PARAMETERS

  • Product name: Fidget spinner magnetic wireless charger
  • Material quality: ABS+PC
  • Input: 9V, 2.22A/5V, 3A
  • Output: 5W/7.5W/10W/15W(Max)
  • Charging distance: <8mm
  • Interface: Type-C
  • Size: 62.3mm

NOTE

  • Please use this product in an environment of 0°-40°C.

  • Do not disassemble or repair this product at will.

  • Pay attention to dampness, high temperature, high heat, exposure, and other extreme areas.

  • Do not charge products with high voltage.

  • Do not apply excessive pressure to the product.

  • It is recommended to use a high-speed charger and cable above 25W.

  • Please use in a place with good air circulation.

  • For optimal performance, please place the wireless charging device in the correct position. * When using sofas, blankets, fabric materials, etc., it is not possible to dissipate heat and a fire may occur.

  • Please note that conductive foreign objects such as liquids, metal powders, etc. do not enter the
    connection part of the charger.

  • Do not place credit cards or other information storage media near the wireless charger. Storage information may be damaged.

  • Do not place the product near the stove.

  • If the ambient temperature is higher than 30° C, the charging time may increase.

  • If there are coins and other metal substances between the wireless charger and the phone, charging may be interrupted.

  • Metal materials may become hot during the filling process.

  • There is a risk of overheating and catching fire when overcharging with foreign objects such as metals and magnets

  • When wearing a thick shell and charging, it may not be possible to charge. Please be aware.

SPECIFICATIONS

Fidget spinner magnetic wireless charger is a single coil magnetic suction fast charging scheme, which is compatible with WPC1.2.4 standard to achieve efficient wireless charging. The system can transmit two-way charging power up to 15W, which is compatible with 5W, 7.5W, 10W and 15W. It has multiple protection measures for foreign matters, and has intelligent output power and conversion rate control to achieve the best temperature rise control effect.

Due to the characteristics of the product, efficiency may vary.

FCC WARNING

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals