Saihan GT3 Under Desk Treadmill Instructions

Saihan GT3 Under Desk Treadmill Instructions

Specifications

• Product Model: GT3
• Indoor use only
• Voltage: 100V-120V AC
• Maximum User’s Weight: 265lbs

Product Instruction

Thank you for purchasing our Under Desk Treadmill. Our product is designed to help improve your health. Please read the following instructions carefully before using the treadmill to ensure your safety and avoid accidents.

Security Cautions

• This product is for indoor use only. Do not use it outdoors.
• Place the treadmill on a flat and clean surface. Avoid placing it on a thick carpet or near water.
• Ensure there is a 3-6ft barrier-free safety area behind the treadmill.
• This product is intended for use by adults. Minors require adult supervision or guidance.
• Do not use the treadmill if you feel unwell, mentally handicapped, or lack common sense, unless under supervision or guidance from a responsible person.
• If the power cord is damaged, contact the manufacturer or professional maintenance personnel for replacement.
• Use the treadmill with a power socket that has a safe ground line. Ensure the grounding plug installation and grounding parameters are consistent with your area’s standards. If the plug and socket are incompatible, arrange for qualified electricians or after-sales personnel to handle them.
• Before use, check all parts to ensure screws and nuts are properly locked.
• Wear comfortable and tight-fitting clothes to avoid them getting caught in the machine.
• Keep children and pets away from the treadmill to prevent accidents.
• Avoid touching any moving parts with your hands. Do not place hands or feet under the running belt.
• This product is designed for family use and is not suitable for professional training, testing, or medical purposes.
• The heart rate display on this product is not intended for medical use.
• This product is designed for use by one person on the running belt at a time.
• Before cleaning and maintenance, shut down the machine and unplug the power plug.
• Always shut down the machine and unplug the power plug when leaving it unattended.
• Use only spare parts provided by the original factory. Do not replace them privately.

Quality Assurance Commitment
We assure you that our product is made of high-quality materials. In case of any problems during normal use, we provide a one-year warranty from the date of purchase. If you encounter any quality issues within 12 months, please contact our customer service. Please do not attempt to handle them without permission.

The following situations are not covered by the warranty:

• Damage caused by external factors.
• Use of non-original accessories.
• Incorrect handling not in accordance with the instructions.
• Failure to follow the instructions provided.

This warranty pledge is valid only for private use by families and does not apply to professional training or gym use. If you need to purchase non- warranty accessories, please contact our customer service and provide the following information:

• Instructions
• Product model
• Fittings serial number
• Certificate of purchase date

Before sending the products back to the company, please wait for confirmation from our customer service. Unauthorized returns will not be covered by our company and any associated will not be borne by us.

FAQ

• Q: Can this treadmill be used outdoors?
• A: No, this treadmill is designed for indoor use only.
• Q: What is the maximum weight limit for this treadmill?
• A: The maximum user’s weight for this treadmill is 265lbs.
• Q: Can children use this treadmill?
• A: This product is intended for adults. Minors should be under adult supervision or guidance when using the treadmill.
• Q: Is the heart rate display on this treadmill suitable for medical purposes?
• A: No, the heart rate display on this product does not provide data for medical purposes.

Please read the instructions carefully before using

Thank you for purchasing our product, our products will help to improve your health.

Security cautions

• In order to ensure your safety and avoid accidents, please read the instructions carefully before use.
• This product is for indoor use only, please do not make it or use it outdoors; the treadmill should be placed in a flat and clean position, do not put it on a thick carpet or near a water area, there should be 3-6ft barrier-free safety area behind the treadmill.
• This product is for adults, minors need adult care. It is forbidden for those who feel unwell mentally handicapped or lack common sense to use it. Unless they are under the supervision or guidance of the person responsible for their safety regarding the use of the product.
• If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or professional maintenance personnel.
• This product is only used for 100V-120V AC voltage. Please use the power socket with a safe ground line. The installation and grounding of the grounding plug must be consistent with the parameters of the user’s area. If the plug and socket are incompatible, please arrange for qualified electricians or after-sales personnel to handle it.
• Check all parts before use to ensure that the screw and nut are locked
• When using it, please wear comfortable and tight clothes to avoid the clothes being hung by the machine. Don’t let children or pets come near to avoid accidents.
• Avoid all moving parts with both hands. Do not place hands or feet in the space under the running belt.
• This product is designed for family use only, but not suitable for professional training and testing, and can not be used for medical purposes.
• The heart rate display of this product does not provide data for medical purposes.
• This product is only for one person on the running belt.
• Before cleaning and maintenance, please shut down and unplug the power plug.
• Shut down the machine and unplug the power plug when you leave.
• Please use the spare parts provided by the original factory. It is strictly forbidden to replace them privately.
• This product is of HC grade, and the maximum user’s weight is 265 lbs.

Quality Assurance Commitment

• We ensure that the product is made of high-quality materials.
• In normal use, if there is a problem, we will be responsible for the warranty.
• The warranty period is one year (from the date of purchase). If you buy products with quality problems, please contact our customer service within 12 months. Please do not deal with them without permission.
  • The following are not covered by the warranty:
  • Damage caused by external factors.
  • Use non-original accessories.
  • Privately handled incorrectly.
  • Not following the instructions.
• This pledge is valid only for private use by families and does not apply to professional training such as gyms.

If you need to buy non-warranty accessories, please contact customer service. Please provide the following information when ordering:

• Instructions.
• Product model.
• Fittings serial number.
• Certificate of purchase date.

Before the confirmation of our customer service, please do not send the products to our company, and send them back without permission. Our company does not bear any cost.

Configuration list and technical parameters

Walkingpad configuration

Technical parameters

Packing dimension

|

5227.165.7 inch

Running area

|

15.75*39.76 inch

maximum power

|

2.5 HP

Max capacity| 265 lbs

Gross weight

|

61.6 lbs

Product folded size

|

5025.24.88 inch

---|---

Product unfolded size

|

4825.239.37 inch

Speed range

|

0.6-7.6 mph

Net weight| 52.6 lbs

Product parts

**Assembly instructions

**

Assembly steps

1. Open the packing box, remove the relevant accessories and machine from the box, and place the machine on a flat floor.
2. Rotate the right and left handrail levers to unlock, lift the handrail till it can’t be moved anymore, and rotate the handrail levers to lock the handrail.
3. Assemble the phone holder: slide the phone holder into the handrail socket as below picture.
4. Put the power plug into the power jack, and switch on the power to complete the assembling.

Folding steps

1. Assemble the phone holder: slide out the phone holder into the handrail socket.
2. Rotate the right and left handrail levers to unlock, put down the handrail till it can’t be moved anymore, and rotate the handrail levers to lock the handrail.

Functional operation instructions

Function Description

1. Start/Pause/Stop, Speed increase, and Speed decrease buttons on the remote controller.
2. The speed increase/decrease of the remote controller is 0.2mph each pressing on the + / – button.
3. Speed display 0.6-7.6 mph, calories display 000-999KCAL, time display 00-99 minutes, The mileage shows 0.00-99.9 miles.
4. After 5 minutes of standby, it will enter the dormant state, and the display will turn off.

Display Panel

Infrared receiver: Please point the remote controller to this area when using it.

Display control panel

Functional operation instructions

• Button :
  When the machine is in standby mode, press the button to run at the speed of 0.6mph, and then press the button to pause the machine. During the pause, the button light keeps flashing. (The current data will not be cleared during the pause mode).

• Button :
  When the machine is in operation, press the button and the treadmill will slowly stop running.

• Quick speed button:
  Quickly change the speed to 3mph or 6mph, for instance, when the treadmill is on, press the button, and the treadmill will slowly increase (or decrease) from the current speed to the speed of 3/6mph.

• Button :
  The machine can adjust the speed by 0.2mph under the operating conditions.

Safety lock
In any emergency that occurs, the treadmill stops automatically and the display screen shows “—” when the safety lock is pulled out from the console.

NOTE : Clamp the clip (A) onto the waistband of your clothes, another key (B) is magnetically attracted onto the console.

Replacement CR2450 battery for remote control
After using the handrail remote control for a long time, if the user feels that the sensitivity of the remote control is reduced or cannot be operated, the battery must be low. At this time, the remote control battery needs to be replaced. Click the battery clipper take out the remote from the handrail and replace the CR2450 battery as below picture:

Remote controller

Remote control instructions：

Key:
When the machine is in standby mode, press the key, and the machine will run from a low speed of 0.6mph, then press a key to pause when in working mode(data will be retained), and to resume the workout, press the key again. Hold press key to stop workout(data will be cleared).

• + Key : Each time you press the + key during operation, the speed will increase by 0.2mph; long press the + key to continuously increase the speed by 0.2mph. Most up to 3.8mph by remote controller.
• – Key : Press the – key once during operation, the speed will decrease by 0.2mph; long press the – key to continuously decrease the speed by 0.2mph.

Need to pull out the remote control insulation paper before using

• Prepare to draw insulation paper
• Pull out the insulating paper
• Available status

Replacement button battery for remote control
After using the remote control for a long time, if the user feels that the sensitivity of the remote control is reduced or cannot be operated, the battery must be low. At this time, the remote control battery needs to be replaced.

Remove the battery

• Push the battery cover back and open it upwards
• Use a flat-head screwdriver to pop up the battery
• Remove the battery

Install battery

• Battery specifications: CR2450 3V Battery installation + positive upward
• Battery installation Close the battery cover and push it forward, then press it down.
• Battery installation complete

Warm-up exercise
Before exercising, it’s better to do stretching exercises first. A successful exercise plan must include warm-up, aerobic, and relaxation exercises. The number of exercises should be at least two or three times a week. You can take a day off for exercise. After a few months, you can increase the number of exercises to four to five days a week.

Warm-up is an important part of your fitness exercise. Warm up before every exercise. Moderate warming-up can prepare your body for the next more intense exercise because warming-up can help muscles warm up and stretch, improve blood circulation and pulse, and send more oxygen into muscles. Repeated warm- up exercise can also reduce muscle soreness after aerobic exercise. We recommend the following warm-up and relaxation exercises.

1. Stretch downward: Bend your knees slightly and bend your body forward slowly. Relax your back and shoulders and touch your toes with both hands. Hold for 10 to 15 seconds, then relax. Repeat three times.
2. Stretch your ankles: Sit on a clean cushion and straighten one leg. Put the other leg inward so that it is close to the straight leg. Try to touch your toes with your hands. Keep it for 10 to 15 seconds. Then relax. Repeat each leg three times.
3. Extension of the calf and foot tendons: body forward hands against the wall the left leg arches forward, the right leg is straight, the left leg is on the ground, then bend your left leg and hold it for 10 to 15 seconds, then relax, repeat each leg three times.
4. Head movement: 1-tilt your head to the right and feel the left neck muscle stretch; 2-turn your head to the back; turn your head to the left; 4-turn your head to the front of the chest. then relax and do it three times.
5. Waist movement: stretch your arms to the left and right, then slowly lift them, over your head. Put your right arm as far as possible to the ceiling. Straighten, hold for 1 second, and feel the stretch of your right muscle. Repeat the same action on the left arm.

Maintenance guidelines

Warning : Be sure to unplug the power plug of the machine before maintaining the product.

• Use a cloth to clean the product surface.
• Full cleaning will prolong the service life of the machine.
• Clean the dust regularly to keep the parts clean. Clean the exposed parts on both sides of the running belt. This will reduce the accumulation of impurities in the running belt. Keep your sneakers clean. Avoid bringing foreign bodies under your running belt and wearing your running board and belt. The surface of the running belt should be scrubbed with a soapy wet cloth. Please be careful not to splash water on the electrical components and under the running belt.
• Check and lock all parts of the treadmill regularly, replace defective parts, and/or leave the equipment idle for repair.

Adjusting the Running Belt
If you are using a walking machine, you can adjust the belt tightness to improve the slippage or non-fluidity of the running belt.

Adjusting running has two functions: tightening adjustment and belt center position adjustment.
The running belt has been adjusted when it is out of the factory, but after use, the running belt will be stretched, which will deviate from the center position and cause the running belt to rub the foot sidebars and rear cover damage. It is normal for the running belt to be stretched during use. When the product is running under no load, it is normal for the running belt to have a side deviation of no more than 5mm.

Adjusting Running Belt Method

• The running belt shifts to the left
  

  • Adjustment method:
    With the power turned off, take a 5mm hexagon wrench and turn the left rear roller bolt 1/4 turn to the right to tighten the running belt. Then the machine is powered on and the test running belt is centered. Follow this method until the running belt is centered.

• The running belt shifts to the right

  • Adjustment method:
    With the power turned off, take a 5mm hexagon wrench and turn the right rear roller bolt 1/4 turn to the right to tighten the running belt. Then the machine is powered on and the test running belt is centered. Follow this method until the running belt is centered.

  • Adjustment method:
    With the power turned off, take a 5mm hexagon wrench and turn the left and right bolts of the rear roller 1/4 turn to the right at the same time to tighten the running belt. Then the machine is powered on to test the tightness of the running belt. Follow this method until the tightness of the running belt is moderate.

Note : When walking on the machine, the pressure on the running belt is not balanced due to the difference in the force used by the two feet when running, causing the running belt to deviate from the center. This deviation is normal. When no one is running on the running belt, it will return to the center.

The running belt can not be adjusted too tight. This will damage the running belt, increase the pressure on the front/rear rollers, cause damage to the roller bearings, etc., and cause abnormal noise or other problems.

Add lubricating oil to the walking machine

• The refueling position is on the lower surface in the middle of the running belt. (As shown below)
• Cut the mouth of the oil bottle into a small mouth, not too large, and be able to inject.
• Raise the running belt so that the oil bottle is extended to the bottom of the running belt and the oil is injected into the middle of the running board. Put down the running belt, press the oil injection part with your hand, and rotate the running belt to spread the oil evenly on the running board.
• After turning on the machine, wait one minute for the oil to be applied evenly, and then use the treadmill.

Note : Please turn off the power of the machine before refueling the running belt.

Fault code

Check that the connection between the electronic meter and the controller is not properly connected.

2.   The main IC of the controller contacts badly and is re-tightened.

3. The controller power supply is abnormal, charge the controller

E02| Explosion-proof and

impact-proof protection

| 1.     If the motor is open or in bad contact, replace the motor or check the connecting terminals.

2.     Power tube breakdown, replace it or the controller.

E05| Over current

protection

| 1.     Overload.

2.     The resistance of the treadmill is too heavy and needs to be lubricated.

3.     The motor is damaged, replace it.

E06| Overload protection
E10| Keyboard and panel control connection communication failure| 1.   Check if the connection between the electronic watch and the controller is poorly connected.

2.   The controller plug is not in good contact and is re-inserted.

3.   The controller power supply is abnormal and the

controller is replaced.

ISED Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>