e-pens EPWSG-10 World Scanner Go User Manual

June 16, 2024
e-pens

e-pens-logo

e-pens EPWSG-10 World Scanner Go

e-pens-EPWSG-10-World-Scanner-Go-PRODUCT

Product Information

Specifications

  • Scan & Read
  • Scan & Save
  • Word Translation
  • Text Translation
  • Voice Recorder
  • Wi-Fi connectivity

Package Contents

  • World Scanner Go device
  • User manual
  • USB charging cable

Parts of the World Scanner Go

  • Screen (touchscreen display)
  • Volume + and Volume – buttons
  • On/Off button
  • B Button and A Button (for navigation)
  • Alignment Line
  • Microphone (for voice recording)
  • Speaker (for audio playback)
  • USB Charging port

Product Usage Instructions

Getting Started

Power On/Off
Hold the Power On button located on the side of the pen for about 3 seconds until the start-up screen appears.

Menu Navigation
To navigate the menu, simply swipe along the touchscreen and tap on any of the icons available.

Connecting to Wi-Fi

To connect to Wi-Fi:

  1. Go to Settings.
  2. Make sure the Wi-Fi option is turned on.
  3. Available Wi-Fi options should then appear.
  4. Choose the relevant connection.
  5. If successful, the Wi-Fi icon should appear in the top right corner of the screen.

Left or Right-Handed Option
Before scanning, ensure the screen orientation matches your preferred scanning hand:

  1. Go to Settings.
  2. Tap on the relevant orientation option to flip the screen for left/right-handed use.

Available Functions

Scan & Read
To use the Scan & Read function:

  1. Tap the Scan & Read icon on the home screen.
  2. Hold the pen at a slight angle and press the tip of the pen over a word until it lights up.
  3. To scan, ensure the black line on the tip is in the middle of the text and slowly drag the pen from left to right over a word or sentence at a consistent speed.
  4. Once scanning is complete, lift the pen off the page. A voice will read aloud what you have scanned.

Scan & Save
To use the Scan & Save function:

  1. Tap the Scan & Save icon on the home screen and create a new file.
  2. Scan your document.
  3. After scanning, you can edit the file name or delete the file as needed.

Voice Recorder
To use the Voice Recorder function:

  1. Tap the Voice Recorder icon on the home screen.
  2. Create a new file.
  3. Tap the Microphone button to start recording and tap it again to stop recording.
  4. Press the Save button to save your recording.

Online Functions

Note: The following functions require access to a Wi-Fi network.

Word Translation
To use the Word Translation function:

  1. On the home screen, tap the Word Translation icon.
  2. Scan your desired text.
  3. Tap on a word to view its definition.
  4. To have the definition read aloud, tap the Speaker icon.
  5. To add a word to the built-in storage, tap the Star icon.

Text Translation
To use the Text Translation function:

  1. On the home screen, tap the Text Translation icon.
  2. Swipe from the right side of the screen to select languages.
  3. Scan a sentence and press Go Translate.
  4. The translation will appear on the screen and will be read aloud.

Voice Translation
To use the Voice Translation function:

  1. Tap the Voice Translation icon on the home screen.
  2. Choose the languages you want to translate by assigning them to the A and B buttons.
  3. Speak into the pen and it will translate your speech into the selected languages.

Frequently Asked Questions (FAQ)

  • Q: Can I use the World Scanner Go without an internet connection?
  • A: Yes, you can use the Scan & Read and Scan & Save functions without an internet connection. However, online functions such as Word Translation, Text Translation, and Voice Translation require access to a Wi-Fi network.
  • Q: How do I charge the World Scanner Go?
  • A: Connect the provided USB charging cable to the USB charging port on the device. Plug the other end of the cable into a power source such as a computer or a wall adapter. The device will begin charging.
  • Q: Can I edit the scanned text?
  • A: No, the World Scanner Go does not support text editing. However, you can edit file names when using the Scan & Save function.

Introduction to the World Scanner Go

Thanks for choosing the World Scanner Go. This guide will outline everything you need to know to help you start scanning. After connecting to the internet, you will have full access to all the features mentioned throughout this guide.

Package Contents

  • World Scanner Go
  • USB-C cable
  • User guide
  • 3.5mm wired headphones

Product Specifications

  • Product Name: World Scanner Go
  • Screen: 2.98 inches (resolution 800*268)
  • Capacity: 8GB
  • Lens: 0.3 megapixels
  • Use environment: 0-45°C
  • Product size: 146.531.614.3mm
  • Speaker: 8-ohm, 1-watt single speaker
  • Transmission and chargeable cable: USB-C cable (Type C)
  • Battery: 1050mAh rechargeable lithium polymer battery

Parts of the World Scanner Go

e-pens-EPWSG-10-World-Scanner-Go-fig- \(1\) e-pens-
EPWSG-10-World-Scanner-Go-fig- \(2\)

Getting Started

Power On/Off
Hold the Power On button to the side of the pen for about 3 seconds until the start-up screen appears.

Menu Navigation
To navigate the menu, simply swipe along the touchscreen and tap on any of the icons available.

Connecting to Wi-Fi
Go to Settings and make sure the Wi-Fi option is turned on. Available Wi-Fi options should then appear. Choose the relevant connection, and if successful, the Wi-Fi icon should appear in the top right corner of the screen.

Left or Right-Handed Option
Before you start scanning, it is important to check the screen orientation matches your preferred scanning hand. To do this, go to Settings and tap relevant orientation. Here, you can flip the screen so it is correctly viewable for left/right-handed use.

Available Functions

Scan & Read

  • Tap the Scan & Read on the home screen.
  • Hold the pen at a slight angle, then press the tip of the pen over the word until it lights up.
  • To scan, ensure the black line on the tip is in the middle of the text and then slowly drag the pen from left to right over a word or sentence at a consistent speed.
  • Once you have finished scanning, lift the pen off the page. A voice will read aloud what you have scanned.

Scan & Save

  • Tap the Scan & Save   on the home screen and create a file. You can then Scan and save the document.
  • Once you have finished scanning, you will be able to edit the file name or delete the file.

Voice Recorder

  • To enable the voice recorder , tap the Voice Recorder on the home screen, where you will then be asked to create a new file.
  • Tap the Microphone to start recording. Press the microphone again to stop the recording. Press to save your recording.

Online Functions

NOTE : The following section details features that require access to a WiFi network.

Word Translation

  • Word Translation allows you to get definitions of words you have scanned.
  • To use this function, on the home screen, tap the Word Translation . Scan your desired text, then tap a word for its definition.
  • To have the definition read aloud, tap the Speaker and to add a word to the built-in storage, tap the Star .

Text Translation

The Text Translation function provides a range of languages. From the home screen, tap Text Translation   Swipe from the right side of the screen to select languages. Scan a sentence and press Go Translate. The translation will show up on screen and the translation will be read aloud.

Voice Translation

  • Voice Translation allows you to speak into the pen and translate up to two languages at a time.
  • Tap Voice Translation and then choose the languages you are going to use, assigning them to the A and B buttons.
  • To start translating, press and hold either the A or B button and begin speaking.
  • After you release the button, you can begin translating the text into the two languages you have chosen and have it read aloud.

USB Charging

  • You will be notified when the battery of the World Scanner Go is low, so be sure to get to an outlet as soon as possible.
  • The World Scanner Go uses a rechargeable battery powered by USB-C (included) and takes between 2-3 hours to reach a full charge.
  • The charging port can be found on the side of the device.

Device Connection

This product is designed for use with both Windows/Mac computers and Android devices.

Volume Adjustment

Use the + and – buttons on the right side of the pen to adjust the volume to a comfortable level.

Force Shutdown

Long press the Power button on the right side of the pen for at least 10 seconds. The system will then force shutdown, after which you can power on the World Scanner Go as usual.

Software Update

  • Select Settings and navigate to Software Update. Use the Check for Updates option to check that you have installed the most up-to-date software.
  • If you do not have the most recent software version installed, you will be given the option to Download Update.

WARNING. Before updating system software, ensure that the device has sufficient power (50% battery and is connected via USB to a charging port). Do not attempt to use the device whilst the system installation is being downloaded. Usage Notice

Usage Notice

Safety

  • Do not expose this product to direct sunlight or extreme heat.
  • This product is not a toy. Users under the age of 4 should use this product under adult supervision.
  • Do not soak this product and its accessories in liquids.
  • Before using the charger, check whether the wires, plugs, shells, or other parts are damaged. If damage is found, stop using it immediately until repaired.
  • This product can only be used with the recommended power supply (recommended power supply specification 5V-1A) and power supply that complies with certification specifications and meets the standard requirements.
  • Built-in 1050mAh lithium polymer battery cannot be removed or replaced. If damaged, please contact post-sales service for guidance around repair.
  • The charger should be used under adult supervision.
  • For user safety, the device cannot be used while charging.

Cautions

  • Only use the same type or equivalent type of battery to replace.
  • For your safety, please do not expose the battery to environments prone to causing overheating such as fire or direct sunlight.

Troubleshooting

ERROR TRY
Boot failed Charging the device

Computer cannot

detect pen

| Using the USB Cable that came with the product
Pen does not read out after scanning| Ensure Mute

mode is off in Word Translation menu.

No Voice Translation

| Ensure device is connected to WiFi

network

Touchscreen unresponsive

| Long press the Power button for 10 seconds to force

shutdown

then boot as usual

No scanning registered

| Adjust

posture to ensure full

contact with

the page

Other

| Contact

Customer Services.

For more detailed solutions and FAQs, refer to: www.e-pens.com

You can also explore the Contact Us section on the webpage to speak to one of the team.

WARRANTY INFORMATION
You can find warranty details on our website: www.e-pens.com

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals