Newland N910 BASE Smart POS Payments Machine User Manual
- June 16, 2024
- Newland
Table of Contents
Newland N910 BASE Smart POS Payments Machine
Product Configuration
Please check the items when you receive the product and if there is anything defective or missing, please contact your terminal provider.
Overview of the product
*Note: The ports of different functional bases may be different, please refer to the base configuration table for details
Precautions
Safety precautions
- Please insert the AC plug into the AC socket corresponding to the input marked on the accessory power adapter.
- Do not use in the presence of any potentially explosive gas places.
- on-professionals should not open the power adapter to avoid danger
- Avoid installation or use during thunder and lightning to avoid danger of lightning and electric shock.
- If you find an abnormal smell, overheating, or smoke, please cut off the power immediately.
- The antenna of the product, under normal use conditions, is at least 20cm away from the house of the user
Precautions for power supply
- Pls use the power adapter of the N910 product, using the non-matching power adapter may cause unpredictable problems.
Precautions for daily use
- Please be sure to take to comply with the specifications in this document.
- Do not use in proximity of potentially flammable gases or substances.
- Do not disassemble the terminal or power supply.
- Cut off the power immediately when there is an unusual smell, overheating or smoke.
- Do not use the terminal in extremely cold and hot zones, such as near fire.
- Do not use it in near water or humid environments to prevent liquid from entering the device.
- Do not drop, throw, or bend the device.
- Use in a clean environment to avoid entry of small objects into POS.
- Do not use near hospital equipment without permission.
- Do not use a terminal with radio communication on and near the aircraft, or in any other place where radio communication is prohibited.
Statement
- Fujian Newland Payment Technology Co., Ltd. is not responsible for the following actions: damage caused by use and maintenance, not under the conditions described in this guide.
Packing list
Standards
Transmitter Frequency:| BT:2402-2480MHz
2.4G Wi-Fi:2412-2462MHz
---|---
Receiver Frequency:| BT:2402-2480MHz
2.4G Wi-Fi:2412-2462MHz
RF-Output Power: ERP/EIRP/Conducted| 2.4G Wi-Fi (Conducted):23.98dBm
Bluetooth (Conducted):9.57dBm
FCC
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This wing two contains. part 15 of the FCC Rules. Operation is subject to the
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular lot reception, whip de decline my lining erence to equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio technician for help
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Copyright
- The author of this manual is Fujian Newland Payment Technology Co., Ltd. The author enjoys and reserves all copyright exclusive rights in accordance with the copyright law. Without the author’s prior consent, copying, additions, deletions, and excerpts of part or all of this manual are not allowed , Reproduction or imitation.
- The contents of this manual only explain the use of the products manufactured by the author. Regarding the contents of this manual, the author of Fujian Newland Payment Technology Co., Ltd. does not bear any express or implied guarantee or guarantee responsibility.
Warning
- For any damages or problems caused by options or consumables (not the original products or approved products provided by our company), Fuji and Newland Payment Technology Co., Ltd. will not bear any responsibility. Without the consent of Fujian Newland Payment Technology Co., Ltd., there is no right to make product modifications or changes.
Disclaimer
- Fujian Newland Payment Technology Co., Ltd. retains full copyright ownership. Rights and protection in this guide. No part of this guide may be copied. Added or deleted, excerpted, reproduced or imitated partially and wholly in any form or by any means without prior written consent of Fujian Newland Payment Technology Co., Ltd. and its affiliates.
- The company (Fujian Newland Payment Technology Co., Ltd.) without any clear advance notice of reservation status of rights under this manual modification of content.
- Enterprise product standard number: Q/FXZF 001
- Fujian Newland Payment Technology Co., Ltd.
- Zip Code: 350015
- Fax: 0591-83979955
- Customer Service Center: 4009181311
- http://www.newlandpayment.com
- No. B602, Building #1, Haixia Jingmao Plaza, Fuzhou Bonded Area 350015, Fujian, China
- ©Copyright Fujian Newland Payment Technology Co., Ltd.
contact
- No. B602, Building #1, Haixia Jingmao Plaza, Fuzhou Bonded Area 350015, Fujian, China
- Telephone:0591-83979921
- Customer Service Center: 4009181311
- www.newlandpayment.com
- The appearance and configuration parameters of the product are subject to the actual situation, Fujian Newland Payment Technology Co., Ltd. reserves the final right to interpret this document