KUFATEC E39 Complete Set Front and Rear View Camera Instruction Manual
- June 16, 2024
- KUFATEC
Table of Contents
KUFATEC E39 Complete Set Front and Rear View Camera
Product Information
Specifications
- Product Name: Complete Set Front and Rear View Camera
- Version: v1.2 (01.06.2023)
- Manufacturer: Kufatec GmbH & Co. KG
- Address: Dahlienstr. 15, 23795 Bad Segeberg
- Email: info@kufatec.de
General Notes
The Complete Set Front and Rear View Camera provide a comprehensive solution for installing front and rear view cameras in vehicles. It includes detailed assembly instructions and cable routing information.
Safety Instructions
Before starting the installation process, please read and understand the following safety instructions:
- Ensure that the vehicle’s electrical system is turned off before connecting or disconnecting any cables.
- Use caution when handling the components to avoid any damage.
- If you are unsure about any step of the installation process, consult a professional technician.
Requirements for the Intended Use
To successfully install and use the Complete Set Front and Rear View Camera, the following requirements must be met:
- The vehicle should have a compatible interface for connecting the camera system.
- All necessary tools and equipment for disassembly and assembly should be available.
- Basic knowledge of vehicle electrical systems and assembly procedures is recommended.
Product Usage Instructions
Assembly Instructions
- To install the Front and Rear View Camera, follow the steps below:
- Once all necessary disassemblies have been completed, proceed with the assembly and connection of the Front and Rear View Camera components:
Assembly/Connection control unit
- Install and connect the control unit according to the provided instructions.
Assembly rear view camera
- Mount the rearview camera in the designated location, ensuring proper alignment and secure installation.
Cable routing rear view camera
- Route the cables from the rearview camera to the control unit, following the recommended path. Secure the cables in place to prevent any interference.
Cable routing to the front
- Route the cables from the control unit to the front of the vehicle, where the front camera will be installed. Follow the recommended path and secure the cables properly.
Exchange emblem/cable routing front camera
- If required, perform the emblem exchange and route the cables for the front camera installation. Refer to the relevant section in the manual for detailed instructions.
Connection mirror camera
- Connect the mirror camera according to the provided instructions.
Connection steady plus
- Establish a connection to a steady power source, as specified in the manual.
Connection CAN/Ethernet
- Connect the CAN or Ethernet interface, as required, following the provided instructions.
Additional Instructions
- After completing the assembly and connection steps, follow these additional instructions:
Assembling the vehicle
- Reassemble all previously disassembled parts, ensuring proper fitment and alignment. Refer to the relevant sections in the manual for detailed instructions.
Coding with Coding Interface
- If necessary, perform coding using the provided Coding Interface. Follow the instructions in the manual for coding procedures.
Bus rest
- Perform a bus rest procedure, if required, as outlined in the manual.
FAQ (Frequently Asked Questions)
- Q: What tools are required for the installation?
- A: The installation requires basic hand tools such as screwdrivers, trim removal tools, and pliers. Refer to the manual for a complete list of recommended tools.
- Q: Can I install the Front and Rear View Camera myself?
- A: The installation process requires technical knowledge and experience. If you are not confident in your abilities, it is recommended to seek professional assistance.
- Q: Is the Front and Rear View Camera compatible with all vehicles?
- A: The camera system is designed to be compatible with a wide range of vehicles. However, it is recommended to check the product compatibility list or consult with the manufacturer for specific vehicle compatibility.
Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.
- Front Camera
- Fuse box
- Gateway
- Control unit
- Ground pin
- Rearview camera
- Mirror camera
Please be aware that this overview is only for illustration purposes. Always lay the cable set most conveniently and shortly as possible. For a detailed description of the cable routing, please refer to the relevant sections of the following manual.
CONTACT
- Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>