Guitte GGP-05 Acoustic Guitar Vibration Pickup Owner’s Manual
- June 16, 2024
- Guitte
Table of Contents
GGP-05
Acoustic guitar multifunctional
vibration pickup for live streaming
Owner’s manual
GGP-05 Acoustic Guitar Vibration Pickup
Thank you for purchasing this product!
GGP-05 features digital effects, drum machine, live streaming, tuner and
vibration speakers. It not only offers REVERS, CHORUS, drum machine and more
when you’ re playing guitar unplugged, but also enable you to live stream and
make online teaching. Its specialized voice MIC Jack is easy for you to
explain during live streaming or online teaching. Besides, if you like
percussive guitar, the internal Mic is perfect for your performance.
Features:
- GGP-05 acoustic guitar multifunctional live streaming vibration pickup is suitable for 36-42 inches classical& acoustic guitars.
- Vibration speaker effects mode: adding effects for your guitar when playing unplugged.
- MIC Input Jack for live streaming and voice explanation during teaching
- OTG audio interface function for recording and live streaming
- Various RHYTHMS, with multiple music genres
- With internal Mic percussive guitar
Safety instructions:
- Please take out the battery first, and then put the battery in the packing box or dry vessel if not in use for a long time, so as to avoid damp.
- Keep the battery in dry and cool places, don’t store the battery with metals, otherwise electricity leakage, short circuit and battery leakage will occur.
- This product is precision electronic device, don’t open its case for any reason on your own, if the product malfunctions due to it, you will no longer enjoy the factory warranty.
- This product has lithium battery, for your safety, please don’t replace the lithium battery.
- Don’t replace this product’s pickup with the one from other brands.
This product uses lithium battery, please make sure the polarity matches that marked on the product when you install the battery.
Package contents:
1. The unit
2. Plastic panel
3. Knob
4. Tail nail’s connecting cable
5. Vibration amp
6. Wire clip: 2PCS
7. Owner’s manual| 8. 18650 lithium battery(3.7V 2900mAh)
9. Type-C cable X1
10. M2 x 8 black screws: 5PCS
11. Piezoelectric pickup
12. Transparent PVC sheet
13. Paperboard
14. Headphones with MIC
---|---
IR pickup’s functions:
Control panel
- VOCAL MIC—3.5mm voice MIC Input Jack, for connecting to the attached headset.
- Type-C port–for charging, OTG recording&live streaming.
- MIC VOL.–for adjusting the volume of MIC percussive guitar in the main interface. (Please refer to chapter 6 for details.)
- DRUM VOL.–for adjusting the volume of Drum machine in the main interface. (Please refer to chapter 6 for details.)
- MASTER–for adjusting the Master Volume or turn on/off the unit
- LCD display–for displaying its features and the related info
- GUITAR VOL.– for adjusting guitar volume in the main interface.(Please refer to chapter 6 for details.)
- SPEAKER Out–for connecting to the speaker with vibration effects
- LINE OUT–for connecting to 6.35mm socket
- Pickup Input Jack–for connecting to the pickup
- 18650 lithium battery compartment
How to assemble the pickup?
- Drill square holes on the side of the acoustic guitar as shown in the picture.
- Assemble as shown in the pictures.
A. Assemble the pickup B. Assemble the tail nail’s connecting cable C. Assemble the vibration amp
Note: The correct position is at the lower right corner of guitar cavity. with the amp’s lead wire facing upwards. (The speaker faces towards the guitar’ s side as shown in the pie.) D.I nstal I the battery
After the installation and a careful check, if it’s installed correctly, then you can install the lithium battery.
E.
Connect the internal wires
Insert the pickup plug into the unit’s pickup Jack
Insert the tail nail’s connecting cable plug into the unit’s tail nail cable Jack
Insert the vibration speaker’s plug into the unit’s vibration speaker Jack
F. Assemble the unit and panel
Put the unit into the guitar cavity, make sure the display screen align with the square holes drilled earlier, and then align the panel with the unit’s display screen from outside, tighten the panel and unit with 4 PCS 2 x 8mm screws. G. Assemble the knobs and PVC sheets
Put the PVC sheets on the control knobs’ metal pot shafts first, and then insert the 4 knobs into the pot shafts respectively.
Quick tour
- G.MIC–MIC percussive guitar’ s VOLUME control, you can adjust the VOLUME by the MIC VOL. knob (*MIC percussive guitar only works at LINE OUT mode).
- DRUM–Drum Volume Control, you can adjust Drum’ s volume by the DRUM VOL. knob.
- PIEZO–Guitar Volume Crontol, you can adjust Guitar’ s Volume by the GUITAR VOL. knob.
- MST.–Master Volume Control, you can adjust the Master Volume by the MASTER Volume knob.
The Default Main Interface
- Tap MIC VOL. knob in the main interface and enter TUNER mode interface.
*Tap MASTER knob and exit this interface.
Tuner mode
- VOL.–VOICE MIC’ s Volume Control, you can adjust it by the MIC VOL. knob.
- TRE.–VOICE MIC’ s Treble Control, you can adjust it by the DRUM VOL. knob.
- BASS–VOICE MIC’ s BASS Control, you can adjust it by the GUITAR VOL.knob.
- REV.–VOICE MIC’ s REVERB Control, you can adjust it by the MASTER knob.
*Tap MASTER knob and exit this interface.
Long press MIC VOL. knob and enter
Voice MIC Control interface
- Tap the MASTER knob in the main interface, enter/exit Bluetooth interface.
- You can turn on/off the Bluetooth by adjusting the MASTER knob.
Bluetooth interface
- You can adjust drum machine’ s VOLUME by the MIC VOL. knob;
- Indicating the current RHYTHM’ s sequence number, you can choose the drum machine’ s RHYTHM by adjusting the DRUM VOL. knob.Tap DRUM VOL. Knob to turn on/off the drum machine.
- Indicating the current BPM value, you can adjust the drum tempo by the GUITAR VOL. knob.
*Tap MASTER knob to exit this interface.
Tap DRUM knob and enter
Drum Machine Interface
- Long press MASTER knob to turn on/off the unit.
The interface when you turn on the unit
- TONE–Guitar’ s Tone Control, you can adjust it by the MIC VOL. knob.
- CHOR.–Guitar’ s Chorus Control, you can adjust it by the DRUM VOL. knob.
- REV.–Guitar’ s Reverb Control, you can adjust it by the GUITAR VOL. knob.
- Tap MASTER knob to exit this interface.
Tap GUITAR VOL. knob and enter
Guitar Effects Control Interface
- When the battery symbol becomes red, it means it’ s time to charge the unit.
- The battery’s symbol is in red when it’ s charging(as shown in the pic)
- The battery’s symbol is in green once it’s fully charged.
About charging
You can charge GGP-05 with the attached USB cable and your own 5V power
adapter, such as mobile phone charger.
Note: The power adapter’ s rated output current should be greater than
1A!
Note: Pis use the attached lithium battery only! Don’ t use other one.
Troubleshooting and maintenance
-
The LCD display is off when the unit is turned on.
a.Please check whether it’s fully charged or not.
b.Please check whether the battery’s polarity is correctly connected or not. -
There is something wrong with the 1″string or 6 string while playing the guitar.
Please check whether the pickup’s installation position is correct or not, if not, please adjust the installation position. -
Strange sound comes from the guitar’s cavity.
a.Please check whether the vibration speaker has absorbed other stuff or not, if yes, dispose the stuff.
b.Please check whether the connecting cable is loose or not, if yes, use the wire clip to bundle up the cable.
Parameters
Maximum power consumption: 3W
Charging time: 3-4hrs
Speaker’s specifications: 2 inches
Maximum power: 2W
Speaker Impedance: 80
Dimensions: 95x70x55mm
Weight:137g
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao’an, Shenzhen, 518133
China.
Tel: 0086-755-29765381
Email: service@guittochina.com
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has
been evaluated to meet general RF exposure requirement.
| 
---|---
http://weixin.qq.com/r/VykeBjbEx2u4rXJl93xF|
https://u.wechat.com/EMF28ODLy7pe6JLGNGYaFd0