LiQi KPT-2000 BL01L Fan Heater Instruction Manual
- June 16, 2024
- LiQi
Table of Contents
KPT-2000 BL01L Fan Heater
Instruction Manual
KPT-2000 BL01L Fan Heater
Model: KPT-2000
BL01 L
READ AND SAVE THIS INSTRUCTION
This product is only suitable for well insulated spaces or occasional use
PLEASE READ AND SAVE THESE INSTRUCTIONS
This heater is for residential use only. It is not intended to be used in
commercial or industrial settings
If service is required for this Heater, please E-mail us at
Aftermarket311@gmail.com
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
– Children of less than 3 years should be kept away unless continuously
supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the
appliance provided that it has been placed or installed in its intended normal
operating position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children aged from 3 years and less than 8 years shall not plug in,
regulate and clean the appliance or perform user maintenance.
CAUTION – Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.
– If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
– CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
– WARNING: In order to avoid overheating, do not cover the heater.
– The heater must not be located immediately below a socket-outlet.
– Do not use this heater in the immediate surroundings of a bath, a shower or
a swimming pool.
In order to prevent the risks of a fire, an electrical shock, burns and other
injuries, it is imperative to observe basic safety measures when using
electrical appliances.
Please read the following information carefully before using the appliance for
the first time for your own safety and to ensure correct use.
SAFETY INSTRUCTIONS
When using any electrically powered product, basic safety precautions should
always be followed, including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
WARNING – to reduce the risk of fire, electrical shock or injury to
persons or property:
- Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate.
- Remove the unit fr om its packaging and check to make sure it is in good condition before using.
- Do not let children play with parts of the packing ( such as plastic bags)
- Close supervision is necessary when the product is used by or near children or infirm persons. Do not allow children to use it as a toy.
- Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is dropped or appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
- Before unplugging the power cord, be sure to turn the power off. When touching the unit, be sure your hands are dry to prevent electrical shock.
- Ensure the cord is fully extended before use and arrange it so that it is not in contact with any part of the heater.
- In use, some parts of the heater are hot. When moving, hold the heater only by the handle provided.
- Do not use the heater in areas such as garages where petrol, paint or other flammable substances are used or stored.
- Do not use near or point the heater to furniture, animals, curtains or other inflammable objects. Keep combustible materials such as furniture, bedding and any other combustible materials at least 1 meter from the front and sides, and from the rear of the heater.
- Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the cord so that it cannot be tripped over.
- Do not place the heater on bedding or on thick and long pile carpet where the openings may be blocked.
- To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, moisture or any liquid other than those necessary for correct operation of the product.
- This product should not be used in the immediate vicinity of water, such as bathtub, washbowls, bathroom swimming pool etc. where the likelihood of immersion or splashing could occur.
- Switch off and unplug from outlet when not in use, before assembling or disassembling parts and before cleaning. Remove by grasping the plug – do not pull on the cord.
- A common cause of overheating is deposits of dust and fluff entering the heater. Ensure these deposits are removed regularly by unplugging the heater, allowing it to cool and cleaning as described in the Care. Cleaning and Storage section.
- Be sure that no other high current appliances are plugged into the same circuit with your heater as an overload can occur.
- Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire.
- Do not use the appliance for other than its intended use.
- Do not use outdoors. FOR INDOOR USE ONLY.
- Do not leave the appliance unattended when switched on.
- Do not place objects on the product or allow objects to obstruct the inlet or outlet openings, or operate in close proximity to walls or curtains, etc. Do not cover the unit when in operation.
- Do not locate the heater immediately below a socket-outlet.
- The use of attachments or accessories not recommended or sold by the product distributor may cause personal or property hazards or injuries.
- This product is intended for normal domestic/household use only.
Use this heater as described in this manual. Any other uses, not recommended by the manufacturer, may cause fire, electric shock, or injury to persons and may void the warranty.
USING THE HEATER
- Before inserting the plug into an electrical outlet, make sure that the electrical supply in your area matches that on the rating label on the unit.
- When plugged in, turn on the Main power switch at the base side of unit.
- When in Standby mode, only on the control panel will respond to your touch. Press to access the rest of the control panel.
a) Low Power. (Press to switch i)
b) High Power: (Press to switch ii)
c) Timer: Press repeatedly to set a period after which the heater will turn itself off (between O hour to 8 hours)
d) Press +,- to start setting output temperature .Temperature setting from 50-95 F, default77 F, When the ambient temperature reaches the desired temperature, the PTC stops working; When the ambient temperature falls below the desired temperature, the PTC resume working automatically.
e) Press it to light On/Off the display
f) Press it to turn on/off the flame effect ,it can be used independently.
g) ,turn on or turn off item. item always keep working 30 seconds of cool air after turn off it . this design can protect item use longer.
Warning:
- Before removing the plug from the socket , switching off and better work for 30-60 second for cool down in condition that protecting inner parts.
Remote control
Please use Lithium battery CR2025 3V.
NOTE: the remote control buttons perform the same functions as those on
the control panel on the unit.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the
appliance automatically in case of overheat,e.g. due to the total or partial
obstruction of the grids. In this case, unplug the appliance, wait about 30
minutes for it to cool and remove the object which is obstructing the grids.
Then switch it back on as described above. The appliance should operate
normally. Should the problem persist, please contact the nearest customer
service.
NOTE: To assist in maintaining the internal components, after pressing
the button the fan will continue to blow room air for a period of 30-60
seconds before shutting down to standby.
Battery
The remote control use one button cells, model No. CR2025 (3V). We recommend
the use of Lithium type battery for longer use.
Note: Please follow battery
disposal instruction on battery packaging, or contact your local councils for
safely disposal of batteries.
SAFETY SYSTEM
- In the event of abnormal overheating, a safety device shuts down the appliance automatically. After a short cooling down phase, the appliance is ready for use again
- If you still notice the same defect as above mentioned, remove the plug from the socket and consult your authorized dealer to your after-sales service department.
- During use, do not touch or cover the air outlet. This may cause the unit to over heat, and the safety device to operate.
- The unit is also fitted with a tip over switch. Do not use on thick and long pile carpets, as the heater may no t work, due the tip over switch not been activated .
MAINTENANCE
- Your appliance must be switch OFF via the main power supply and unplugged before proceeding with any cleaning work.
- Clean the housing with a lightly damp cloth, a vacuum cleaner or a dusting brush.
- Never use flammable or abrasive cleaning agents such as benzene or spirit to clean the appliance.
- Never immerse the appliance in water!
- Clean the air inlet and outlet regularly with a vacuum cleaner.
- If the appliance is not used for an extended period it must be protected against excessive dust and dirt. Please dismount the heater and store in a dry place away from sunlight and dirt.
SPECIFICATIONS
| Model No | KPT-2000 BL01L |
|---|---|
| Voltage | 120V |
| Frequency | 60Hz |
| Output Power (W) | 1500W |
CORRECT DISPOSAL OF THIS PRODUCT
When the time comes to eliminate this product, please consider the environmental impact and take it to recognized recycling facility instead of disposing it with general household waste. Take the equipment to a waste disposal site. Plastic and metal parts that are used in the construction of this appliance can be separated into pure grade which allow recycling. Ask to your service center for details. Everyone of us can participate on the environmental protection.
PLEASE READ AND SAVE THESE INSTRUCTIONS
This heater is for residential use only. It is not intended to be used in
commercial or industrial settings
If service is required for this Heater, please E-mail us at
Aftermarket311@gmail.com