Youshiko YC8092 Extra Large XXL Jumbo Radio Controlled Digital Wall Clock Instruction Manual

Youshiko YC8092 Extra Large XXL Jumbo Radio Controlled Digital Wall Clock

Specifications :

• Product Name: Youshiko YC8092
• Control System: MSF Radio Control (UK Version)
• Power Source: 4 x LR6 AA batteries

Product Usage Instructions

Step 1: Set up

1. Put the batteries in the clock.
2. Wait for the clock to self-set automatically by the MSF Radio Control system. This process may take a few minutes to a few hours or maximum by or between 01:00 am to 05:00 am, depending on the signal or location in the UK.
3. After the initial set-up, the clock will automatically change for Spring & Autumn and perform automatic time checks.

Step 2: Placement
Keep the clock around 2.5 meters away from TV, computer, Wi-Fi hub, mobile phones, etc. to avoid interference that can block the radio control signal.

Appearance
Part A:

• A1: Radio Controlled icon
• A2: Hours and minutes of Time
• A3: DST Icon
• A4: Alarm1 turn on icon
• A5: Alarm2 icon
• A6: Week
• A7: Temperature
• A8: Date
• A9: Humidity
• A10: Indoor comfort
• A11: Month

Part B:

• B5: Button
• B6: Hanging hole
• B7: Support frame
• B8: Battery compartment

Setting the Daily Alarms:

1. Press and hold down the B5 button for more than 3 seconds until the Alarm 1 Time hour display starts to flash.
2. Use the B6 and B7 buttons to set the required hour.
3. Press the B5 button to confirm your setting.
4. The Minute display of the Alarm 1 time starts to flash. Use the B6 and B7 buttons to set the required minute.
5. Press the B5 button to confirm your setting.
6. The Repeat icon M-F of the Alarm 1 time starts to flash. Use the B6 and B7 buttons to set the alarm repeat in M-F or S-S or M-F and S-S.
7. Press the B5 button to confirm your setting.
8. The snooze time of Alarm 1 starts to flash. Use the B6 and B7 buttons to set the minute of snooze you need.
9. Press the B5 button to confirm your setting.
10. The Hour display of the Alarm 2 time starts to flash. Use the B6 and B7 buttons to set the required hour.
11. Press the B5 button to confirm your setting.
12. The Minute display of the Alarm 2 time starts to flash. Use the B6 and B7 buttons to set the required minute.
13. Press the B5 button to confirm your setting.
14. The Repeat icon S-S of the Alarm 2 time starts to flash. Use the B6 and B7 buttons to set the alarm repeat in M-F or S-S or M-F and S-S.
15. Press the B5 button to confirm your setting.
16. The snooze time of Alarm 2 starts to flash. Use the B6 and B7 buttons to set the minute of snooze you need.

Alarm Function
To switch the display between ALARM1 time and ALARM2 time:

• Press the B5 button.

In alarm1 or alarm2 display mode, press the B5 button to turn the alarm on or off:

• The alarm turn on icon will be displayed when the alarm function is open.
• The alarm turn off icon will disappear when the alarm function is closed.

F.Y.I.: The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case, the alarm will be repeated automatically after 24 hours. The rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times while the alarm signal is heard.

FAQ:

• Q: How does the clock set itself automatically?
  A: The clock uses the MSF Radio Control system to receive time signals and self-set accordingly.

• Q: Can I manually change the time?
  A: Once the clock has self-set, manual time change is not required. The clock will automatically adjust for Spring & Autumn time changes.

• Q: How far should I keep the clock from electronic devices?
  A: To avoid interference, keep the clock around 2.5 meters away from TV, computer, Wi-Fi hub, mobile phones, etc.

• Q: How long does it take for the clock to self-set?
  A: The self-set process may take a few minutes to a few hours or maximum by or between 01:00 am to 05:00 am, depending on the signal or location in the UK.

• Q: Can I set multiple alarms?
  A: Yes, you can set both Alarm 1 and Alarm 2 with different time settings and snooze durations.

Youshiko YC8092
MSF Radio Control ( UK Version ) Instruction Manual

One step easy set up:

• Just put the batteries in the clock and wait for clock to self set automatically by MSF Radio control system, within few minutes to few hours or maximum by or between 01:00 am to 05:00 am, depending on the signal or location in UK. (After this you never have to do anything, Automatic time change for Spring & Autumn and automatic time checks).
• Keep the clock around 2.5 meter away from TV / Computer / Wi-Fi Hub/ Mobile phones Etc to avoid interference, As interference can block the radio control signal.

Features

• MSF Radio control time function
• Perpetual Calendar Up to Year 2099
• Time in 12/24 hour format.
• Two Daily Alarm Function (Can set alarm repetition: workday and rest day)
• Automatic snooze function (OFF or 5~60min)
• Temperature measurement ranges: -9.9°C (13°F) ~ 50°C (122°F)
• Humidity measurable range: 20%RH ~ 95%RH
• Low battery prompt
• Power Supply:
  • Battery: 4 x LR6 AA

Appearance

Part A-Positive LCD

• A1: Radio Controlled icon
• A2: Hours and minutes of Time
• A3: DST Icon
• A4: Alarm1 turn on icon
• A5: Alarm2 icon
• A6: Week
• A7: Temperature
• A8: Date
• A9: Humidity
• A10:Indoor comfort
• A11: Month

Part B – Buttons and Framework

• B1: “SNOOZE” touch position
• B2: “ ” button
• B3: “ ” button
• B4: “ ” button
• B5: “ ” button
• B6: Hanging hole
• B7:Support frame
• B8: Battery compartment

Initial operation

• Open the clock battery compartment cover
• Insert 4 x AA batteries observing polarity [ “+” and “-” marks]
• When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will hear a beep tone, At the same time into work mode

Reception of the Radio signal:

• The clock automatically starts the MSF signal search after 7 minutes of any restart or changing of new fresh batteries. The radio mast icon starts to flash.
• At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure with the MSF signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio mast icon disappears from the display), the system will automatically attempt another synchronization at the next full one hour. This procedure is repeated automatically up to total 5 times.
• To start manual MSF signal reception, press the “ ” button once. If no signals received within 7 minutes, then the MSF signal search stops (the radio mast icon disappears) and start again at the next full one hour.
• During RCC reception, to stop searching radio signal, press the “ ” button for 2 seconds.

F.Y.I.:

• A flashing radio mast icon indicates that the MSF signal reception has started
• A continuously displayed radio mast icon indicates that the MSF signal was received successfully
• The symbol “DST” indicating the time of receipt for daylight saving time.
• We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or computer monitors
• Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme circumstances, place the system close to the window.
• During the MSF radio receive mode, only the “ ” button function, other button operation have no function, If you want to carry out other functions of operation, please press “ ” button to exit the MSF radio receive mode.

Manual time setting

• Press and hold down the “ ” button more than 2 seconds to enter the time and general settings, first set the radio controlled clock(RCC) function setting, Now use “ ” and “ ” buttons set the RCC receive function to activate(ON) or close(OFF)

• Press “ ” to confirm your setting, the Hour display starts to flash, now use “ ” and “ ” buttons to set the
  correct hour.

• Press “ ” to confirm your setting, the Minute displays starts to flash, now use “ ” and “ ” buttons to set the correct minute.

• Press “ ” to confirm your setting, the Year display 2018 starts to flash, now use “ ” and “ ” buttons to set the correct year.

• Press “ ” button to confirm your setting, the Month display starts to flash, now use “ ” and “ ” buttons to set the correct month.

• Press “ ” button to confirm your setting, the Date display starts to flash, now use “ ” and “ ” buttons to set the correct date.

• Press “ ” button to confirm your setting, the Month and Date icon display starts to flash. Now use “ ” and “ ” buttons to set the date display on Month/Date or Date/Month.

• Press “ ” to confirm your setting and to end the setting procedures, enter the clock mode.

F.Y.I.:

• After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time Mode.
• In the set time, the number of minutes of the change, automatically from the zero second forward
• In the set time, you can press hold the “ ” and “ ” button to quickly change the setting of the value

Setting the daily alarms

• Press and hold down “ ” button more than 3 seconds until Alarm 1 Time hour display of the Alarm 1 time starts to flash. Use the “ ” and “ ” buttons to set the required hour.
• Press “ ” button to confirm your setting, The Minute display of the Alarm 1 time starts to flash. Use the “ ” and “ ” buttons to set the required minute.
• Press “ ” button to confirm your setting, The Repeat icon “M-F” of the Alarm 1 time starts to flash. Use the “ ” and “ ” buttons to set the alarm repeat in “M-F” or “S-S” or “M-F” and “S-S”.
• Press “ ” button to confirm your setting, the snooze time of the Alarm1 starts to flash. Use the “ ” and “ ” buttons to set the minute of snooze you need.
• Press “ ” button to confirm your setting, The Hour display of the Alarm 2 time starts to flash. Use the “ ” and “ ” buttons to set the required hour.
• Press “ ” button to confirm your setting, The Minute display of the Alarm 2 time starts to flash. Use the “ ” and “ ” buttons to set the required minute.
• Press “ ” button to confirm your setting, The Repeat icon “S-S” of the Alarm 2 time starts to flash. Use the “ ” and “ ” buttons to set the alarm repeat in “M-F” or “S-S” or “M-F” and “S-S”.
• Press “ ” button to confirm your setting, the snooze time of the Alarm2 starts to flash. Use the “ ” and “ ” buttons to set the minute of snooze you need.
• Press “ ” button to confirm your setting and to end the setting procedure.

F.Y.I.:

• After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock mode.
• The alarm is repeatedly set to M-F, the alarm function will be activated from Monday to Friday, the Saturday and Sunday will be invalid. The alarm is repeatedly set to S-S, and the alarm function will be activated on Saturday and Sunday, and will expire from Monday to Friday. When the alarm is repeatedly set to display both M-F and S-S, the alarm function will be activated throughout the week.
• the snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit is minutes.

The alarm for opening and closing

• Press “ ” button can switch the display ALARM1 time or ALARM2 time, in the alarm1 or alarm2 display mode, press the “ ” button to turn the alarm on or off.
• The alarm 1 or alarm 2 turn on, the “ ” or “ ”icon is displayed, the alarm 1 or alarm 2 function is open, The repeat of alarm icon at the same time is also displayed.
• The alarm 1 or alarm 2 turn off, the“ ” or “ ”icon disappears, the alarm 1 or alarm 2 function is close.

F.Y.I.:

• The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be repeated automatically after 24 hours.
• Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.

Switching off the alarm signal

 The alarm sound when the trigger, press any button buttons or touch the “SNOOZE” character position and hold for more than 2 seconds to stop the alarm signal.

Snooze function:

• When the time is up to the alarm, touch the “SNOOZE” character position, the alarm signal stops, and enter the SNOOZE mode. After the snooze time is counted, the alarm will ring again.
• In snooze mode, press any button buttons or touch the “SNOOZE” character position and hold for more than 2 seconds to exit the snooze mode.

F.Y.I.:
When the snooze function is set to OFF, when the time is up to the alarm, touch the “SNOOZE” character position does not have this snooze function.

Temperature & Humidity Detection:

• Temperature measuring range: -9.9°C (+13°F) ~ +50°C (+122°F), LL °C(°F) will displayed if value lower than -9.9°C (+13°F), HH °C(°F) will displayed if value higher than +50°C (+122°F).
• Humidity measuring range: 20%RH ~ 95%RH, 19%RH will displayed if value lower than 20%RH, 96%RH will displayed if value higher than 95%RH.

Indoor comfort instructions

Indoor comfort level is calculated according to the indoor humidity, a total of 3 Smiling face pattern.

Low battery:

• When the low voltage icon “ ” is displayed, you need to replace the clock battery.
• If the clock cannot receive the MSF signal (because the distance is too great to receive a signal from the transmitter in Cambria UK), you have the option of setting the time manually as mentioned above. As soon as the reception of the MSF signal is possible, then the clock is readjusted automatically.
• We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of interference, such as televisions or computer monitors; Radio reception is weaker in rooms with concrete walls and in offices. In such extreme circumstances, place the system close to the window.
• Consideration of duty according to the battery law, Old batteries doesn’t belong to domestic waste because they could cause damages of health and environment. End-user are committed by law to bring back needed batteries to distributors and other collecting points.

All enquires email: service@youshiko.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>