GIRNOOR G160 Corded Stick Vacuum Cleaner Instruction Manual

: June 15, 2024
: GIRNOOR

Table of Contents

Introduction of Accessories
Installation Guide
Installation Guide
Operating Instruction
Dust Bin Emptying
Dissemble The Appliance
Filter Maintenance
Unclog Brush Head
Safety Instruction
Trouble Shooting
Q: What should I do if my product is short of accessories?
Q: What should I do if I don't know how to use the vacuum cleaner?
Q: What should I do if I have any other questions?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GIRNOOR G160 Corded Stick Vacuum Cleaner Instruction Manual

Introduction of Accessories

Motorizd Brush|
---|---
Brush Tool| For furniture, curtain, ceiling, etc.

Installation Guide

Use as stick vacuum cleaner Assemble the motor with dust bin: Align the mark on the CAP with the unlock sign on the dust bin, then rotate the CAP clockwise until you hear a “dick”.

Connect different accessories for different cleaning purposes.

Plug in the power and press the switch to start working.

Installation Guide

If you want to use it as a hand vacuum, just need to insert the accessary that you need directly to the body until you hear a “click”.

Operating Instruction

Self-standing support
The vacuum cleaner can be self-standing when the floor brush and wand are positioned perpendicular (90 degrees).
Steps lightly on the floor brush with your foot, and then push or pull on the wand/handle until you will hear a “click”.

Storage of power cord After using the vacuum cleaner, please wind the power cord on the storage pile.

Self-standing support
The vacuum cleaner can be self-standing when the floor brush and wand are positioned perpendicular (90 degrees).
Steps lightly on the floor brush with your foot, and then push or pull on the wand/handle until you will hear a “click”.

Dust Bin Emptying

Empty the Dust Bin (Do not fill dirt over the MAX mark)

Press the Dust Release Latch

Pour out the dirt

Dissemble The Appliance

Press the dust bin release button.
Hold the dust bin and rotate the handle part counterclockwise to separate.

Remove filters

Filter Maintenance

Note : The filter needs to be deaned every 2 weeks, it is recommended to replace the HEPA filter every 2-4 months (weak suction is a sign of cleaning/replacing HEPA
Clean HEPA with cleaning accessories

Clean the filter screen cover with cleaning accessories

Put the filters back into the dust bin.

Unclog Brush Head

Removal method of brush roller

Disconnect the power supply and slide the brush lock latch to the right as shown in the figure.
Lift the brush lock latch to take out the brush roller.
Lift the brush lock latch to take out the brush roller
Wash the brush roller with water
Allow to air dry for 24 hours 12
Install the brush roller back into the floor brush and slide the lock latch to the left until it is locked 11 24hrs 10

Safety Instruction

PLEASE READ ALL INSTRUCTIONS AND CAUTION MARKINGS IN THIS MANUAL BEFORE USING THIS MACHINE.

Basic precautions should always be followed when using an electrical appliance. Including the following:
WARNING
These warnings apply to the machine, and also where applicable, to all tools, accessories, chargers or adapter.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

This machine is not suitable for persons (including children) with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety.
Please keep the vacuum cleaner out of the reach of children and keep your children away from the vacuum cleaner for their safety. What’s more, please be more cautious when you use the vacuum cleaner around your children.
Please just follow the guidance in this Manual when taking each step. Don’t take any maintenance measures outsides this manual.
This vacuum deaner just suitable for dry floor or environment. Please don’t install or use it outdoors or in wet environment such as kitchen or bathroom. What’s more, please don’t touch the plug or any part.
Please stop using the vacuum cleaner and contact us if the cord or plug damaged. The damaged supply cord must be replaced by professional. Replace it by yourself is not be allowed.
If the vacuum cleaner doesn’t work properly, such as get a sharp blow, drop, damaged or drop into water, please stop using it immediately and contact us.
Please do not disassemble or assemble the machine at will, otherwise it may cause machine failure. It also may result in fires or electrocution.
Please don’t use it to pick up the water.
Please do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they or their vapors may be present.
Please don’t pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Please keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Do not point the hose, wand or tools at your eyes and ears or put them in your mouth.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
Please don’t use it before the dust bin and filter are install.
Please unplug from the power when the vacuum cleaner is not in use and before maintenance.
Please be sure to turn off the machine before connecting or disconnecting the motorized brush bar.
Fire Warning : Please don’t place this product on or near a cooker or any other hot surface and do not incinerate this appliance even if it is severely damaged.
Please don’t apply any fragrance or scented product to the filter(s) of this machine. The chemicals in such products are known to be flammable and can cause the machine to catch fire.

PLEASE READ THESE INSTRUCTIONS CAREFULLY THIS MACHINE IS JUST SUITABLE FOR HOUSEHOLD

Do not use near open flames.

Do not store near heat sources.

Do not put hands near the brush bar when the machine is in use.

Do not pick up water orliquids.

Do not pick up burning objects.

PLEASE READ THE “SAFETY INSTRUCTIONS” IN THIS MANUAL BEFORE USING THE VACUUM CLEANER.

Please don’t use outdoors or on wet surfaces, not to vacuum water or other liquids, otherwise electric shock may be caused.
Please ensure the machine remains upright when using it. Dirt and debris may be released if it is turned upside down.
Please don’t operate it while checking for blockages and avoid personal injury.
Please don’t use the vacuum cleaner to clean your car while the car is driving.
Please be ensure that there are no pipe work (gas, water, air) or electrical cables, wires or ductwork are located directly behind the mounting area.

CARPETS OR HARD FLOORS

Please check the manufacturer’s recommended cleaning instructions before vacuuming your floors, rugs and carpets.
The brush bar on the machine can damage certain carpet types and floors. Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorized floor tool and consulting with your flooring manufacturer.
Please check that the underside of the floor tool and its brushes are free from foreign objects that could cause marking before vacuuming highly polished floors.

MACHINE MAINTENENCE

Please just follow the guidance in this Manual when taking each step. Don’t take any maintenance measures outsides this manual.
Please store the machine indoors. Do not use or store it below 37.4°F (3°C). Ensure the machine is at room temperature before operating.
Please clean the machine only with a dry cloth. Do not use any lubricants, deaning agents, polishes or air fresheners on any part of the machine.

VACUUMING

Please don’t use it before the dust bin and filter are install.
Fine dirt such as plaster dust or flour should only be vacuumed in very small amounts.
Please don’t use the machine to pick up sharp hard objects, small toys, pins, paperlips, etc. They may damage the machine.
Some carpets may generate small static charges in the dust bin or wand when vacuuming. These are harmless and won t cause any eletrical hazards. To minimize any effect from this, please don’t put your hand or insert any object into the dust bin unless you have first emptied it. Just clean the dust bin with a damp cloth.
Please be more carefully when deaning on stairs.
Do not put the machine on chairs, tables and so on.
• Do not press down on the nozzle with excessive force when using the machine because it may cause damage.
On waxed floors the movement of the cleaner head may create an unevenluster. If it happens, just wipe with a damp cloth, polish the area with wax and wait for it to dry.

EMPTYING THE DUST BIN

Remove the wand and floor tool in order to make emptying the dust bin easier.
To minimize dust/allergen contact when emptying, encase the dust bin tightly in a plastic bag to empty.
Remove the dust bin carefully from the bag.
Seal the bag tightly, dispose as normal.

CLEANING THE DUST BIN

Ensure the machine is disconnected from the power outlet before removing the dust bin.
Remove the wand and floor tool.
Clean the dust bin with a damp cloth.
Do not use detergents, polishes or air fresheners to clean the dust bin.
Do not put the dust bin in a dishwasher.
Ensure the dust bin is completely dry before replacing.
To replace the dust bin, align the tabs on the dust bin with the grooves on the main body and slide upwards into place until hear a “clicks”.

WASHABLE PARTS
Some parts of the vacuum cleaners need to be cleaned regularly, Please follow the instructions below.

Trouble Shooting

Problem	Possible cause	Solution
Dust escapes from vacuum	Filter is missing or installed incorrectly	Check

filter for correct installation
Filter is damaged and needs to be replaced| Please contact support@gimoor.com and they will provide you with the purchase link
Dust bin is full| Empty dust bin
The appliance doesn’t work| The suction mouth is blocked| Check and remove blockages
Hand vacuum is not installed properly| Remove hand vacuum and reattach ensuring that it is securely in place.
Abnormal motor sounds| The appliance isblocked(such as tube, suction mouth)| Remove blockages