Satisure Wireless Solar Driveway Alarm User Manual

Satisure Wireless Solar Driveway Alarm

User Manual

Please read this user manual before using and installation.

Welcome

Thank you for purchasing our product! Our new Solar driveway alarms use advanced technology, combining microwave and infrared sensing for more accurate detection signals. This reduces false alarms and makes them more secure and reliable.

This wireless driveway and intruder alert receiver has a 1/3-mile (500m) range, suitable for various applications, such as:

• Alerting when visitors enter your driveway.
• Deterring trespassers and thieves from entering your building.
• Alerting you when your child leaves without you noticing.
• Signaling when a customer arrives at a drive-thru.

Overview

• Sensor: The sensor detects motion using microwave and infrared sensing.
• Sensor Eye: The sensor eye captures motion in its field of view.
• Pairing Button: Press this button to pair the sensor with the receiver.
• Receiver: The receiver receives the signals from the sensor and alerts you.
• LED Indicator: This light indicates the status of the receiver.
• ON/OFF: Use this switch to turn the receiver on or off.
• USB Charging Port: Use this port to charge the receiver using a USB cable.
• LED Indicator light: This light indicates the charging status of the receiver.
• Volume button: Use these buttons to adjust the volume of the receiver.
• Up button: Press this button to increase the volume.
• Down button: Press this button to decrease the volume.

Features

• Passive infrared (PIR) and microwave sensors are wireless and easy to install.

What’s in the box

• Solar microwave motion sensor
• Indoor receiver
• Stand base and ball shaft
• Screwdriver
• Waterproof silicone screw cap
• Long screws for fixing
• Explosion-proof nails
• USB charging cable
• User manual

Specifications

• Operating modes: Passive infrared (PIR) and microwave sensors
• LED indication: LED indicators for zones 1 to 4
• Operating power supply: DC5V
• Standby current: [SPECIFICATIONS MISSING]

FAQ

Q: How far is the range of the wireless driveway alarm?
A: The wireless driveway alarm has a range of 1/3 mile (500m).

Q: Can I adjust the volume of the receiver?
A: Yes, you can adjust the volume using the volume buttons on the receiver.

Q: Are the sensors easy to install?
A: Yes, the sensors are wireless and easy to install.

Please read this user manual before using and installation.

Welcome

Thank you for purchasing our product!
Our new Solar driveway alarms use advanced technology,combining microwave and infrared sensing for more accurate detection signals. This reduces false alarms and makes them more secure and reliable.
This wireless driveway and intruder alert receiver has a 1/3-mile (500m) range, suitable for various applications, such as:

• Alerting when visitors enter your driveway.
• Deterring trespassers and thieves from entering your building.
• Alerting you when your child leaves without you noticing
• Signaling when a customer arrives at a drive-thru

Overview

Features

• Passive infrared (PIR) and microwave sensors are wireless and easy to install
• IP44 waterproof sensor
• The sensor supports solar and usb charging
• Wireless RF transmission up to 1/3 milet
• Sensor detection range up to 20 feet (mounted at 5 feet high)
• Sensor detection angles up to 30° vertical and 60° horizontal
• 5 adjustable volume levels (0dB-110dB)
• 58 ringtones
• 4 LED indicators

What’s in the box

• Solar microwave motion sensor
• Indoor receiver
• Stand base and ball shaft
• Screwdriver
• Waterproof silicone screw cap
• Long screws for fixing
• Explosion-proof nails
• USB charging cable
• User manual

Specifications

Getting started

1. POWERING THE INDOOR CHIME RECEIVER Plug the receiver into the outlet, keeping it away from other electrical equipment (e.g., TV,microwave).

2. POWERING THE SOLAR MICROWAVE MOTION SENSOR
   The sensor can be charged using the USB port; a red light will illuminate while charging and turn green when fully charged.
   The sensor can also be charged using solar energy by placing it in direct sunlight, with a red light indicating that it is charging.

3. SOUND VOLUME CONTROL:
   Press the volume control button on the receiver to cycle through 5 volume levels.

4. Setting ringtones for the transmitter:
   There are 58 melodies to choose from:

5. Press the Up or Down key to select your preferred ringtone.

6. Press the Volume button and the Down button briefly at the same time and you will hear a sound from the receiver.

7. Press the pairing button on the sensor to activate it. The new ringer will be set to the ringer of the most recently synchronised transmitter.

8. Pairing the transmitter with the receiver

9. Please select your favourite ringtone before pairing.

10. Press the Volume button and the Down button briefly at the same time.You will hear a sound from the receiver.

11. Press the pairing button on the sensor to activate it.

12. PAIRING TWO OR MORE SENSORS
    If you would like to pair additional motion sensors, please repeat STEP 5.

13. RESET
    Press the Down Button for 5 seconds to reset the receiver to default settings. When the receiver plays a ‘Ding Dong’ sound with the LED flashing, it indicates the reset was successful. You can then follow STEP 5 to pair again.

Please note:

1. Pairing mode has a 5-second window. Activate the transmitter within this time or restart it.
2. Pairing mode ends automatically after completion.

INSTALLATION OF SENSORS

Mount the waterproof PIR Motion Sensor vertically on a solid surface 4.5-6 feet (1.5-2m) above the ground (rotate the sensor to access screw holes).The sensor should be able to swivel as required.Position the sensor to avoid direct sunlight on the sensor eye while keeping the solar cell facing upward.

Tools needed for Installation:

• Pencil
• Phillips screwdriver
• Electric drill with 3/32″ and 7/32″ drill bits (recommended)
• Hammer (optional)
  1. Mark the mounting holes with a pencil.
  2. If installing on a wooden surface, use the included screws. Drill pilot holes using a 3/32″ drill bit to a depth of 3/4″ to help prevent screw stripping and hold the sensor securely.
  3. If installing on another surface, such as brick or masonry, use the included screws and anchors. Drill pilot holes using a 7/32″ drill bit to a depth of 1″. Gently tap the anchors into the pilot holes with a hammer until they are flush with the mounting surface.
  4. Screw the bracket base onto the desired location.
  5. Screw the sensor onto the shell of the bracket.
  6. Twist the ball onto the fixed base of the bracket just until tight. Do not over-tighten.
  7. Adjust the angle of your sensor so that it is looking at your target area.

Chimes List

1. Ding-dong,Ding-dong
2. Ding-dong,Ding-dong
3. Ding-dong,Ding-dong
4. Ding-dong,Ding-dong
5. Corsica Doorbell
6. Ding-dong
7. Ding-dong
8. Ding-dong
9. Ding-dong Chime
10. Ding-dong
11. Ding-dong
12. Ding-dong Chime
13. Alarm Sound Effect
14. Barking
15. Hello Welcome
16. Horn sound
17. Brake sound
18. Westminster Chimes
19. Westminster Chimes
20. Westminster Chimes
21. Westminster Chimes
22. Big ben electronic doorbell
23. Marimba
24. Alerting Ringtone
25. Smooth alert ringtone
26. Marimba Ringtone
27. Flute sound doorbell
28. Harp Ringtone
29. Guitar rhythm
30. Electric piano
31. Starry night
32. Marimba
33. Alerting Ringtone
34. Electric Ringtone
35. Alerting Ringtone
36. Piano rhythm
37. Butterfly Dream
38. Dance beat
39. Twilight Sms Tone
40. Classical organ
41. Joy to the world
42. Super Ringtone
43. Let It Snow
44. Fast Car
45. Dingdong merrily on high
46. Jingle bells
47. Waltz of the flowers
48. For Alice
49. The William tell overture
50. The cuckoo waltzes
51. Going home
52. Victory
53. Happy birthday
54. Fantaisie Impromptu
55. Yesterday Once More
56. Eva’s Polka
57. Russe Dance
58. Souvenirs Denfance

How to Contact After-sale Service?

If you have any product using question, please do not hesitate to contact us through your order, our 24-hour email standby!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>