FLYLINKtech CF700 Car Jump Starter with Air Compressor User Manual

FLYLINKtech CF700 Car Jump Starter with Air Compressor

Product Information

Specifications

• Product: Smart Battery Clamp Jump Starter
• Voltage Display: Yes
• Screen Type: Clamp Screen

Product Usage Instructions

• Step 1: Inserting the Plug
  Start by inserting the plug of the smart battery clamp into the jump starter. Ensure that you push it in completely until it is firmly connected.

• Step 2: Voltage Display
  Once the clamp is connected, the clamp screen will display the voltage of the jump starter. Take note of this value as it indicates the current voltage level.

• Step 3: Understanding the Display Icons
  The upper small icons on the clamp screen are displayed from left to right. These icons provide additional information about the jump starter’s status and functions. Familiarize yourself with these icons before proceeding to the next step.

• Step 4: Next Steps
  Now that you have successfully connected the smart battery clamp and checked the voltage display, you can proceed to the next step based on your specific requirements or the task at hand. Consult the user manual for further instructions regarding your intended use of the jump starter.

Frequently Asked Questions (FAQ)

• Q: What is the purpose of the smart battery clamp jump starter?
  A: The smart battery clamp jump starter is designed to provide a portable power source for jump-starting vehicles with a dead or low battery.

• Q: Can I use the smart battery clamp jump starter for other applications?
  A: Yes, in addition to jump-starting vehicles, the smart battery clamp jump starter can also be used to charge various electronic devices such as smartphones, tablets, and laptops.

• Q: How long does it take to fully charge the jump starter?
  A: The charging time can vary depending on the model and capacity of the jump starter. Refer to the user manual or product specifications for the specific charging time.

Package Content

Introduction
Thank you for purchasing the FLYLINKTECH CF700 car jump starter kit. Please read the user manual carefully before you start to use the product.

Key Features

• A Powerful Jump Starter: Car Jump Starter with 2500 amps peak current can jump-start your flat battery (All Gas or 8.0L Diesel) in 1-3 seconds up to 30 times on a single charge.
• A Powerful Tire inflator: Auto start aid and 150PSI lire inflator 2 in 1. You can inflate your car tires anytime and anywhere.
• A Compact Power Station: The massive 24000mAh capacity can fast charge your phone with dual USB ports and can also power your other car accessories using the 12-16.8V/5A DC port.
• Safety Protection: The high-quality spray gold clamps with a built-in protection circuit provide over-current protection, short circuit protection, over-load protection, over-voltage protection, and over-charge protection. Provide ultimate protection for your safety.
• 5W Emergency LED Light with Multi-Mode: The latest 5W LED camping light to help you start your car in the dark or during nighttime emergencies.

Know Your Product

Technical Specifications

Operation Guide

Recharge the Jump starter

NOTE:
The wall charger or car charger is not included in the package, you can use a universal USB charger to recharge the unit, such as your phone or pad charger(2A above is suggested)

At Home:

• Plug the USB cable into any USB wall adaptor (5V 2A above, not included)
• Connect the USB C cable (Included) to the unit

In Car:

1. plug the USB car adapter(not included)into the car socket
2. connect the USB C cable (included ) to the unit.

Note: It is recommended to recharge the Jump starter every 3-4 months to maintain the efficiency and prolong the service life of the internal battery even if the unit has not been used.

Charging your devices from the USB output
Use the original manufacturer’s USB cable that came with your device and plug it into one of the USB output ports. You can charge two devices at the same time. One of the ports has a maximum output of 12V/2A while the other has a maximum output of 5V/2.4A. Press the power button once to begin charging your device.The power level indicator will show the battery level. To check the power capacity again, simply press the power button once.

LED Light
Long press the function button for 3 seconds to turn it on, then long press the function button again to turn on the LED lighting function, and then short press the function button, and the LED function will turn from long on to SOS and flashing in tum, long press the function button again to turn off directly.

Safety Precautions
By owning a Jump Starter, you have everything you need to jump-start a vehicle need to wait for help. CF700 to the rescue!

We know you’re excited, but before jumping into your vehicle, please be sure to take some precautionary steps:

• Read your vehicle owner’s manual first as the manufacturer may have specific steps and precautions that pertain to your vehicle.
• Be sure to turn off all electronics in your car (radio, lights, etc.) before jump-starting.
• Make sure you are in a dry, well-ventilated area. Never jump-start a vehicle in an enclosed area.
• Remove any moisture from your jump starter unit, accessories, and your vehicle’s battery. Never attempt to jump-start a vehicle when moisture is present. Check that the vehicle’s battery terminals are dean to ensure the best conductivity.
• Properly identify the vehicle battery’s positive (+, red) and negative (-, black terminals before connecting the clamps.
• When using the damps, do not allow the metal teeth of the black clamp to touch the metal teeth of the red damp.
• When using the damps, DO NOT connect the RED damp to the vehicle battery’s negative (-) terminal, or the BLACK damp to the vehicle battery’s positive (+)terminal.
• When connecting smart damps to the battery terminals, ensure the copper teeth on each side of the clamp make good contact with the terminal. The better the connection, the easier it will be to start your vehicle.

NOTE:
When adjusting the clamps please be sure to disconnect your Jump Starter first. This will prevent the occurrence of minor sparks.

To Jump Start Your Car

Step 1:
Insert the plug of the smart battery clamp completely into the jump starter, the clamp screen will display the voltage of just starter, The upper small icons are displayed from left to right. You can proceed to the next step.

Step 2:
Connect the red damp to the positive electrode(+) of the car battery and the black clamp to the negative one(-)

Step 3: Start the vehicle
If the engine does not start on the first try, disconnect it from the car battery and wait for at least 20 seconds before reconnecting.

Step 4:
When the vehicle is started, remove the battery clamp from the car battery and the jump starter within 30 seconds.

NOTE:
After the green light of the smart clip is always on (work status), do not disconnect or change the connection between the clip and the car battery to avoid short circuits or reverse connection.

Inflating the Vehicle Tire

Please read the safety instructions carefully before use:

• For safety reasons, the device should be KEPT OUT OF REACH OF CHILDREN.
• Inspect the FLYLINKTECH CF700 Jump Starter before each inflates, ensuring the valve and the air hose are not damaged.
• Do not bend or restrict the air hose while the compressor is in use.
• Avoid using in rainy or wet conditions as water entering the unit can cause internal damage and premature failure.
• In case of an electrical or mechanical fault, immediately switch off and unplug the compressor.
• Only use on tires and inflatable items.
• Take extra care not to over-inflate when inflating other inflatable items such as sports balls, bike tires, air beds, etc
• Please refer to your vehicle handbook for the correct tire pressure required for your vehicle.

Instruction:
Press and hold the function button (7) for 3 seconds to turn on the machine, then connect the air pump port (1) on the back of the machine to the tire valve, and then short press the tire pressure preset up and down keys (6, 9) to adjust to the preset tire Pressure.

• If you do not need to preset the tire pressure, please adjust the preset value to 0, and press the inflate switch (3) to start inflation.
• Connect the matching air nozzle to the trachea to inflate the ball, swimming ring, rubber boat, etc.; press the unit selection key (7) to switch the pressure unit.

In any of the following situations, the smart clamp turns protection on:

Warnings

• Always read all instructions carefully before using your Jump Starter
• Do not submerge your Jump Starter in water, or expose it to rain or moisture.
• Never open or disassemble your Jump Starter as it will void your warranty.
• Do not expose your Jump Starter to fire, intense heat, or flammable liquids.
• Only charge the product at temperatures between O t:-45 t:
• Keep away from and out of reach of children.
• Do not insert foreign objects into ANY inputs or outputs
• Do not allow the metal teeth of the red clamp to touch the metal teeth of the black clamp when connected to your Jump Starter.
• Do not connect the black damp to the vehicle battery’s positive(+) terminal when connected to your Jump Starter. Do not connect the red damp to the vehicle battery’s negative(-) terminal when connected to your Jump Starter.
• Do not open your Jump Starter to replace the internal battery. No user-replace­able parts are inside your Jump Starter.
• Always disconnect the jump start cables from your Jump Starter after use and store them separately.

Check the power of the product at least every three months, and charge the product in time.

Battery Disposal
The battery is self-contained and not consumer replaceable, The battery must be disposed of properly when it no longer holds a charge. Proper charging practices will increase the life of the product.

Warranty

Our company provides customers with a warranty of 24 months from the date of purchase.

Contact US

For additional assistance or warranty cover claims, please contact us: E-Mail: [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>